Search results

From Embedded Systems Learning Academy
Jump to: navigation, search

Create the page "LED Driver and LEDs" on this wiki! See also the search results found.

  • S12: Traffic Light Sensing Vehicle
    ...previous laboratory experiments on FreeRTOS operating system, building SPI and I2C drivers, configuring ports, etc. to accomplish the main goal. ...his project are an ARM7 LPC2148 Development Board, ShiftBrite LED modules, and light color sensor ADJD-S311-CR999.
    18 KB (2,791 words) - 17:41, 25 May 2012
  • S12: Sound Reader
    ...bass response. Using a 16- channel PWM driver with serial interface each LED is independently controlled to a configurable 12- bit intensity control. *Interface SPI communication between microcontroller and TLC5940
    18 KB (2,836 words) - 19:22, 25 May 2012
  • SJ One Board
    * 512K ROM, 64K(96K) RAM, 1M(2M) SPI Flash, and Micro-SD for storage. *: Arm Cortex-M4 variant contains 96K RAM, and 2Mb SPI flash
    20 KB (2,948 words) - 17:58, 7 February 2018
  • LPC17xx Software Framework Explained
    #* low_level_init() sets up minimal UART0 Driver and prints out CPU speed #* high_level_init() initializes SPI Flash and SD Card Signals
    3 KB (478 words) - 20:34, 2 August 2013
  • F12: Smart Bulb
    ...ipment which has been released to the market incorporates no intelligence, and the functionality is superficial at best. ...presence of occupants, incorporates the diurnal cycle into its decisions, and enables supervisory devices to request changes to the system configuration.
    68 KB (10,476 words) - 20:28, 20 December 2012
  • F12: Evil Watchdog
    ...ing a house by roaming around an environment, navigating around obstacles, and sounding an alarm whenever foreign motion is detected. * Waymond Chen: Front motor control and distance sensor programming
    31 KB (4,981 words) - 22:00, 4 February 2013
  • S13: Smart Cube
    ...8x8 RGB LED clock allows for the information to be displayed in any color, and dynamic. ...the project, the LPC1758 will take the input from the Front-End interface and output the results on the Back-End interface. Only the current time is take
    44 KB (7,244 words) - 21:07, 23 May 2013
  • S18: Rahee
    accessory addresses these issues. To make a bike smarter and to address the issues which making bike-riding safe and bikes secure.
    25 KB (3,859 words) - 10:40, 27 May 2018
  • S14: Power Efficient Security Door System for Light-rail using CAN Bus
    ...ncept of CAN bus which is used for communication between sensors, switches and lights of different coaches of the train. == Objectives and Scope ==
    39 KB (6,149 words) - 23:44, 9 December 2014
  • Project Advising: Remote Security System
    ...r will be able to use a web or mobile application to view security reports and change settings remotely. ...alerts and a cross-device web application, monthly fees can be eliminated and security can be placed into the property owner's hands.
    33 KB (5,223 words) - 04:30, 20 July 2014
  • Embedded System I2C Tutorial
    * The Wiki will remain here for general references about the SJ-One board, and to document student reports. ...capability of sinking that much more current. For example, with a 5v BUS, and 1K pull-up, each device must be able to sink 5mA.
    12 KB (1,979 words) - 20:06, 25 January 2019
  • F13: Line Following Robot
    The Line Following Robot detects a black line on a white surface and moves forward following the line. If a black line is not detected, the Lin ...e Dual Serial Motor Controller, two brushed DC motors, twin motor gearbox, and two tires.
    64 KB (10,131 words) - 05:05, 7 December 2013
  • F13: LED Display
    A Moderately Fancy LED Display ...f household LED lights (i.e. Christmas lights) via a microcontroller. The LED display will be synced to a song playback.
    18 KB (2,773 words) - 03:07, 2 December 2013
  • F13: POV Display
    ...e SJSU board. The microcontroller will interpret the message and drive the LEDs via an SPI interface to display the message on the POV device. ...nted onto the mechanical POV device and the microcontroller will drive the LEDs to produce the message. A website will be setup to provide a user interfac
    17 KB (2,778 words) - 02:04, 8 December 2013
  • F13: Remote Control Car
    ...ering). The second board will be mounted on the car and control the servo and motor controller with a front proximity sensor. * Control for steering servo and speed throttle control
    9 KB (1,391 words) - 03:56, 8 December 2013
  • F13: Bulb Ramper
    ...60 degrees around and, will trigger the camera shutter in sync with travel and will also have the ability to pan as it travels. 1. Learn about the camera interface and how designs differ in order to protect the circuits inside the camera.
    20 KB (3,315 words) - 02:15, 9 December 2013
  • F13: Garage Parking Assistant
    simplify the driver’s task of parking a car in a garage. The parking assistant will automatic assistant will notify the driver of the vehicle's position relative to a predetermined stop point. When the
    28 KB (4,283 words) - 03:54, 8 December 2013
  • S14: Power efficient security door system for light-rail using CAN bus
    ...ncept of CAN bus which is used for communication between sensors, switches and lights of different coaches of the train. == Objectives and Scope ==
    39 KB (6,149 words) - 23:38, 9 December 2014
  • S14: Virtual Dog
    ...d in many places, for creating many creative toys that will keep your kids and pets occupied, can be integrated with shopping carts, so that you’ll neve ...his is achieved with help of multiple distance sensors mounted on a robot, and a target reference object. Robot continuously monitors the position of targ
    34 KB (5,774 words) - 23:42, 6 August 2014
  • S14: Autonomous Control System
    ...rrive at a station. The pods are to navigate the track system autonomously and communicate updates on their location to the master computer. This project **Pods must communicate their location to a master computer and tell the master computer when ready for new route.
    32 KB (5,298 words) - 00:00, 7 August 2014
  • F14: Wireless LED Display
    The Wireless LED Display is a 128x32 RGB LED array that displays text and graphics that a user can control over a Wi-Fi interface from a client PC. '''Charles MacDonald''' - Hardware design, display driver<br>
    5 KB (768 words) - 22:31, 31 January 2015
  • S20: Bucephalus
    ...e avoidance algorithm </B>. It also Increases or Decreases speed on Uphill and downhill (using <B> PID Algorithm</B>)as well as applies breaks at required 1) <B>Driver Controller:</B> Detection and avoidance of the obstacles coming in the path of the RC car by following Ob
    102 KB (15,424 words) - 06:53, 23 May 2020
  • S19: Run D.B.C
    ...RC car. Development of the R.C car's subsystem modules was divided amongst and performed by seven team members. Each team member lead or significantly con == INTRODUCTION AND OBJECTIVES ==
    95 KB (14,239 words) - 16:37, 1 June 2019
  • F14: Self Driving Undergrad Team
    ...ated to Chi Lam, a beloved friend, dedicated Computer Engineering student, and member of this team. <br> <br> ...ng autonomous car in a 15 person team. The car utilizes several components and sensors in order to get from Point A to Point B. Implementation of the car
    72 KB (10,983 words) - 19:43, 5 March 2015
  • F14: Team4-Self Driving Car - AUG
    ...controlling the speed and direction of the car based on the accelerometer and gyroscope enabled on the device. In this way, the user can take control of # The app would compute the checkpoints and distance and feed the information to the on-board communication controller.<br>
    112 KB (17,973 words) - 02:01, 24 December 2014
  • S15: CAN controlled RGB LED cubes
    CAN controlled RGB LED cubes ...input from User and other LED cube will display characters one by one. The LED cubes will be connected to their respective SJ
    22 KB (3,484 words) - 15:58, 27 May 2015
  • S15: RFID Security Box
    ...d, or by communicating with a NFC-compatible device, or RFID tags, tokens, and cards. Sensors and other components used:
    33 KB (5,493 words) - 14:51, 3 June 2015
  • S15: MP3 Player with Graphic Equalizer Display
    ...izer simulated by LED's, an MP3 audio decoder integrated circuit (VS1053), and equalizer analyzing IC (MSGQE7). ...z, 400Hz, 1kHz, 2.5kHz, 6.25kHz, and 16kHz. Commonly seen on audio devices and media software like Windows Media Player or VLC Media Player are simulated
    19 KB (2,958 words) - 05:12, 26 May 2015
  • Tilt Motion Controlled LED Alarm Clock
    ** Quality of technical challenges and solutions adopted. ...eceived and team members looked over the schematics of the necessary parts and designed the schematics for the project.
    5 KB (758 words) - 05:50, 17 April 2015
  • S15: Connect Four - Robotic Player
    ** Quality of technical challenges and solutions adopted. ...ariable difficulty. Prepare to test your ability to think into the future and your proficiency at connecting your pieces against an ideal player.
    34 KB (5,047 words) - 06:23, 26 May 2015
  • S15: Self-Balancing Robot
    ...self-balancing robot. There are two parts to the system: motor controller and geographic controller. Each control system is implemented into different bo ...lement a self-balancing algorithm which uses the input of an accelerometer and gyroscope module. The geographic control board provides directional movemen
    23 KB (3,701 words) - 02:43, 27 May 2015
  • S15: MENL (Monster Encounter Night Light)
    ...is approaching MELN, depending on the distance of the object detected, The LED matrix will change into a pair of close eyes or a pair of open alert eyes. ..., it will change the display to an alert MENL by having its eyes wide open and the color of the eyes change to yellow to emote a warning color.
    13 KB (2,246 words) - 04:50, 26 May 2015
  • S16: Fantastic Four
    [[File:CMPE244 S16 FantasticFour Clock with LED Disp and RGB Lighting.jpeg|centre|600px]] ...also has a flex sensor that can detect whether the user is in bed or not, and is used to turn off the alarm once the user gets out of bed.
    19 KB (2,828 words) - 04:20, 29 May 2016
  • F15: Fury
    ...terrains as well as a master controller with obstacle avoidance algorithms and steering control to direct the car to its final destination. | Sensors, motors and master controller are integrated and tested.
    68 KB (10,136 words) - 20:25, 5 January 2016
  • F15: Electronic Piano
    ...es of a piano using IR proximity sensors as keys. At activation, the key's LED will light up. The number of keys of the piano will cover one key short of ...s motion activated keys, a real-time MIDI decoder to play piano notes, and LEDs that activate along with the activation of its associated key. The electron
    22 KB (3,566 words) - 17:56, 19 December 2015
  • F15: Smart Car
    ...of plotting the LED matrix while the car's board is in charge of sending X and Y coordinates. * LED matrix that can draw out the path the car is taking
    17 KB (2,774 words) - 16:29, 19 December 2015
  • F15: Plant Control
    ...em can be confident that his or her plant is growing in perfect conditions and will be notified otherwise via an LCD screen. This project is a self watering, self lighting, and temperature alerting plant grower.<br>
    18 KB (3,021 words) - 06:58, 19 December 2015
  • S16: OpenSJ Bluz
    '''Real-time system for acquiring, monitoring and distributing miscellaneous sensor data.''' OpenSJ Bluz - A project which aims to develop a system to collect, analyze and distribute sensor data in real-time.
    50 KB (7,709 words) - 21:20, 24 May 2016
  • S16: Mars 1
    ...d to power of that frequency, taken as the complex square root of the real and imaginary parts. ...e domain to frequency domain and display the frequency and amplitude using LED matrix.
    11 KB (1,664 words) - 20:07, 25 May 2016
  • S16: Helios
    ...t detection, rejection and sorting with the help of wireless communication and image processing. ...le of simple sorting using servo motor based on the result of object color and shape detection algorithms running on raspberry pi 2.
    38 KB (6,048 words) - 13:58, 24 May 2016
  • S16: Expendables
    == Wireless LED Text Display == ...xt display scrolls the multicolored text message on the serially connected LED panels. To enable the wireless transmission, the webapp is accessing the IP
    18 KB (2,930 words) - 04:20, 23 May 2016
  • S16: Pinball
    ...e wanted the user to be able to interact with the machine by turning it on and off with a power button, as well as control the flippers with push buttons ...a real-time score machine, servos for powering the flippers, and different LEDs that will display different color patterns throughout the entire session of
    15 KB (2,487 words) - 20:14, 26 May 2016
  • F16: Spartan and Furious
    == Spartan And Furious == ...embedded system, it takes all kinds of information through various sensors and try to give results in the form of travelling from point A to point B. In t
    64 KB (10,005 words) - 23:21, 15 December 2017
  • F16: The-Nine
    ...must be able to be given a destination through an interfacing application and it must be able to travel to that location. ...llows the direction based on the data that is provided by the sensors, GPS and compass values.
    73 KB (11,273 words) - 20:14, 23 December 2016
  • F16: Thunderbolt
    ...ntrolled that will take its destination from the user on the Android phone and drive itself to that destination. Our car has sensors to detect the obstacl ...Area Network) Bus. These five controllers form five modules of the project and are interfaced to different peripherals depending upon their functionality.
    76 KB (10,965 words) - 07:50, 1 May 2017
  • S17: Music Visualizer
    ** Quality of technical challenges and solutions adopted. ...through I2C interface. The LED matrix display will light up row and column LEDs depending on the spectral component present in it. The features of this pro
    6 KB (861 words) - 20:05, 21 March 2017
  • S17: Boom-Z Equalizer
    parsed by the SJSUone board. The team will also create the LED array grid that will be used to able to take an input audio signal (using a regular audio cable/jack) and display some kind of
    25 KB (4,152 words) - 03:51, 2 June 2017
  • S17: Smart Health Gear
    [[File:CmpE244_S17_T5_SHG_android.jpg|300px|thumb|center|Wearable and Android App]] ...ble Bluetooth based Android application which will record the same details and makes it to available to the user. These can be recorded on a day-to-day ba
    37 KB (5,508 words) - 22:34, 10 May 2018
  • S17: Halo
    ...ents. We introduce "Halo", a smart helmet which makes bicyclists feel safe and stand out on busy roads, thus improving their safety. ...wireless hardware. Hence, this module serves as an API to channelize data and enable efficient message passing between modules.
    34 KB (5,475 words) - 20:02, 11 June 2017
  • F17: Viserion
    '''Motor Controller:''' This controller drives the DC motor and Servo in the car.<br> ...h the help of location details provided by GPS and the orientation(bearing and heading angle) provided by the compass.<br>
    76 KB (11,843 words) - 08:28, 23 December 2017
  • F17: FoxP2
    ...sing the custom application which will set the final destination using GPS and destination node. ...ate a fully autonomous car that would receive a GPS destination coordinate and would be able to reach there despite any obstacles around it. We used 5 SJ
    68 KB (10,462 words) - 22:31, 18 May 2019
  • F17: Alpha
    ...d LEDs, headlights and taillights on the car are used for debugging issues and to get all relevant information about the status of the car, in real time. ...Motor Module: ''' To move the car forward and reverse with accurate speed and different steering angle.
    52 KB (8,237 words) - 07:07, 12 January 2018
  • S18: Death Race
    ...econds of the game are indicated by changing the color of the score to red and blinking them. The player with a greater score wins the game. '''2) Wireless Module: ''' Communication bridge between the player module and the Master module.
    33 KB (5,295 words) - 18:10, 4 August 2018
  • S18: Hand gesture controlled multiplayer game
    ...een, and Result screen. This project helps us understand the communication and synchronization of FreeRTOS tasks in an interesting way. ...ame. Translating the onboard acceleration sensor in a way to be meaningful and measurable for the display node to display the slider movement from the two
    30 KB (4,824 words) - 09:52, 27 May 2018
  • S18: Smart Rock Paper Scissors
    ...sensors to detect the player input and feed that input into the game logic and game controller. * Create LED display to guide players through the game
    34 KB (5,285 words) - 14:07, 27 May 2018
  • S18: Audio Spectrum Analyzer with Graphics Display
    ...resume music, skip music, display playing modes, show the matrix's display and rotate the display with a different orientation. ...Matrix part mainly focused on parsing the converted data and drive the RGB LED screen to display the dynamic frequencies of the signals.
    32 KB (5,095 words) - 15:31, 27 May 2018
  • S18: RGB LED Sound Behavior on a Skateboard
    [[File:SkateboardLED.jpg|1000px|thumb|right|'''LED Skateboard''']] === '''RGB LED Sound Behavior on a Skateboard''' ===
    31 KB (5,006 words) - 00:42, 27 May 2018
  • S18: Traffic Menace Video Game
    ...nts to restart the game anytime. User lives and score are displayed on the LED. Our primary goal of this project is to write drivers for the LED and develop a game with FreeRTOS. The position of the car is controlled by the
    33 KB (5,108 words) - 11:41, 27 May 2018
  • F18: Flappy Bird
    ...game. Once the Bird is unable to beat the obstacle, the game is concluded and the score for that session is displayed. ...ntroller form the General Purpose I/O Pins. This input is read repeatedly and based on which the x co-ordinate of the bird gets incremented. In parallel
    27 KB (3,738 words) - 00:02, 13 November 2019
  • F18: Zero Zero UFO
    ** Quality of technical challenges and solutions adopted. ...they will always be on the screen. The obstacles will have random spacing and random size, testing the users focus. Player who survives longer wins the G
    28 KB (4,073 words) - 00:23, 19 December 2018
  • F18: 1v1 Penalty Shootout
    ** Quality of technical challenges and solutions adopted. ...s. Three display modes will be used for the game UI- Start mode, Game mode and display result mode. Thus, the user can experience a mini version of games
    8 KB (1,199 words) - 20:11, 7 December 2018
  • F18: Spartan Warrior
    ** Quality of technical challenges and solutions adopted. ...fferent amounts of points, based on how difficult they are to shoot (speed and size).
    42 KB (6,638 words) - 21:25, 12 October 2019
  • F18: Catch me if you can
    ** Quality of technical challenges and solutions adopted. "Catch me if you can" is a fun game where the user must be attentive and agile enough to
    33 KB (5,075 words) - 17:53, 18 December 2019
  • F18: Wireless sensor network
    ...ensor Network project displays data received from various nodes on a 16*32 LED Matrix which is connected with the Master node (SJOne Board).<br> Each node measures various environmental parameters from its surrounding and send those data to master in form of packets.
    32 KB (5,032 words) - 05:21, 20 December 2018
  • F18: baem geim
    ...the head of the snake. Each fruit eaten increases the length of the snake and controlling it becomes progressively difficult. The player loses the game i ...sing two SJone LPC1758 microcontroller boards one each to drive LED Matrix and Joystick module respectively. They communicate wirelessly through RF Nordic
    30 KB (4,239 words) - 08:48, 18 December 2019
  • F18: 2048
    ...rometer to give direction inputs; left, right, up and down. The Game Logic and the display are updated using FreeRTOS tasks. ...2048. The player is given the choice to choose between the thumb joystick and an onboard accelerometer to give directions.
    30 KB (4,543 words) - 19:20, 6 February 2019
  • F18: Goals of Glory
    ...display screens are developed for the game UI- Start screen, Game screen, and Result screen. Thus, by playing Goals of Glory, players can experience gest '''1) LED Module: ''' The 64x64 LED matrix is driven by a Master SJone board which is responsible to map game v
    31 KB (4,753 words) - 11:18, 8 March 2019
  • S19: Tech Savy
    ...to a selected destination by avoiding obstacles in its path using sensors and motors. ...="FUCHSIA">SENSORS</font>, <font color="orange">GPS and COMPASS</font></B> and we can set the final destination so that car can drive to the destination.
    87 KB (13,269 words) - 21:05, 10 July 2020
  • S19: Lightfury
    Ultrasonic and Geo Sensor Based Self-Navigating Autonomous Car using CAN communication bus ...ing destination and getting car updates is possible with bridge controller and mobile application. The autonomous car navigation is a result of all electr
    63 KB (9,697 words) - 01:05, 24 May 2019
  • F19: Smacman
    ...64x64 LED matrix.The MP3 module(VS 1053) reads music files from an SD card and plays the music through a speaker interfaced with the board in the backgrou ...differently at different levels, depending on the direction of the ball on LED Matrix in real time.
    44 KB (6,927 words) - 20:45, 21 December 2019
  • F19: Infinity Mirror
    ...Audio frequency analyzer, 32x64 RGB LED Matrix and HC-05 bluetooth module and Android application are integrated. ...orientation recognition & trigger respective actions in 2 modes - MP3 mode and Game mode.
    47 KB (7,321 words) - 00:03, 19 December 2019
  • F19: Space Impact
    ...ring a path for him or herself. The game starts on the press of the button and ends when the players runs out of health by taking too many hits. The objec ...em whose sole purpose is to run an arcade game with just an RGB LED Matrix and a microcontroller.
    20 KB (3,107 words) - 00:11, 20 December 2019
  • F19: Road Max Fury
    ...ets tougher than the previous level because of the random movement of cars and faster cars ...d other cars on the road. The LED matrix is interfaced using the GPIO pins and the onboard accelerometer is interfaced using I2C communication protocol.
    23 KB (3,589 words) - 08:32, 1 February 2020
  • F19: Tower Defense in Space
    ...oject was focused on not only technical skills, but team building as well, and working with others towards a common goal. ...onize and sequentialize each task by setting the task priorities carefully and using binary semaphore correctly. <br />
    36 KB (5,633 words) - 23:33, 21 December 2019
  • F19: T-Rex Run!
    The game uses simple pixel art and sound to replicate the style of 1980s arcade games. The ...e obstacles are generated randomly and are moved from left to right on the LED matrix. If dinosaur collides with any of the obstacles its game over. The s
    22 KB (3,245 words) - 17:13, 3 June 2020
  • F19: Pocket tank
    Pocket Tanks is a fast-paced and incredibly fun artillery game. It's a one versus one battle between two tan ...he tank by moving it left or right and then modifying one's shooting angle and power in order to cause maximum damage to the opponent.
    18 KB (2,728 words) - 08:03, 20 December 2019
  • F19: M&B (Morph & Blend)
    ...Two board will be used to implement the game logic, control the RGB matrix and the joysticks/switches. The ...l be used to display the real-time game statistics such as the player name and their score. The game ends if the player lands on an obstacle of a differen
    31 KB (4,741 words) - 21:47, 21 December 2019
  • F20: Space Invaders
    ...the aliens' movement speeds up. The alien invasion is declared successful and the game ends when the aliens have successfully reached the bottom. The fin ...s and preventing an invasion. Amassing a high score is a further objective and one that must be prioritized against your continued survival. Each game scr
    46 KB (7,519 words) - 09:09, 11 February 2021
  • F20: Treasure Diver
    ...ir score based on treasure collected, and the amount of enemies destroyed, and can progress to the next level. ...n RGB LED matrix, one SJ2 board as a graphics processor/matrix controller, and another SJ2 board as a game pad controller. Other objectives are the follow
    74 KB (11,476 words) - 00:05, 31 May 2021
  • F20: Tom & Jerry
    [[File:tj1.jpg|thumb|600px|caption|right|Tom and Jerry Logo]]<BR/> ...ves since a decade now. Surely, you wouldn't have forgotten their chasings and fun moments inside the house.
    32 KB (4,722 words) - 06:53, 18 December 2020
  • F20: Hungry Snake
    ...ody. We also made additions to the game to extend the game's functionality and playability. ...rix, and player controls the snake via a controller with joystick, button, and accelerometer sensor input.
    43 KB (6,552 words) - 22:48, 18 December 2020
  • F20: Corona Run
    ...nd simple to play. The only buttons that the player uses will be the START and PLAY AGAIN button. ...h player has to get at least 10 points without hitting virus and sanitizer and once they succeed, a mask will spawn. If the player grabs the mask, 30 poin
    37 KB (6,175 words) - 07:57, 18 December 2020
  • F20: Flappy
    ...ly (up and down) to NOT hit the beautiful green pipe. With simple gameplay and catchy music, it guarantees thousands of seconds of interesting game for th ...ing the SJ2 board, our team started by researching for suitable components and interfaced them together to replicate Flappy Bird
    28 KB (4,691 words) - 07:28, 18 December 2020
  • F20: Jubeat
    ...akers to play the songs. Drivers for the LED matrix display, the capsense, and the mp3 module were developed for this project. ...aved in an SD card. There is a start and end screen, a song selection menu and game play screen that transition with the game state throughout the game.
    28 KB (4,374 words) - 06:01, 22 December 2020
  • F20: Maddening Marbles
    * Create smooth and natural feeling motion controls using the SJTwo's onboard accelerometer. * Implement a collision detection system that can detect stage goals and will allow the marble to roll along walls.
    10 KB (1,613 words) - 07:41, 18 December 2020
  • S21: UTAH
    ...interface with an Android application to get new coordinates to travel to, and will do so all while avoiding obstacles visible by ultrasonic sensors. ** Emergency stop and start driving
    80 KB (12,529 words) - 17:36, 5 April 2022
  • F20: Bubble Shooter
    ...bubbles cleared in a single shot. The player wins upon clearing the screen and loses when the bubbles touch the bottom of the screen. ...ing SJ2 microcontroller board with LED Matrix, MP3 Decoder, 2 pushbuttons, and joystick.
    28 KB (4,323 words) - 06:21, 22 February 2021
  • F21: Sons of Ultron
    ...it takes to be the ultimate bubble shooter?. This is all displayed in the LED matrix acting as the screen. Use your spike gun to pop all the bubbles from ...LED matrix, with one SJ2 board as a graphics processor/matrix controller, and another SJ2 board as a controller. Other objectives are the following:
    39 KB (5,823 words) - 06:43, 18 December 2021
  • S21: exFAT
    ...g method, we also used the provided PCAN dongle to observe CANBus readings and confirm that we were seeing expected values transmitted. Finally, our devel * Driver/LCD Controller
    85 KB (13,141 words) - 21:12, 1 June 2021
  • F21: Space Rage
    ...imilar to Snake, but the trail left behind is not dependent on any pickups and it is competitive. ...are able to move in the cardinal directions, North, East, South, and West, and are
    37 KB (6,216 words) - 02:43, 27 August 2022
  • F21: Skeh-lleybones
    ...ed paddle deflects the ball at different angles to target different blocks and destroy them. ...to use the SJ2 development board. Additionally, we were required to use a LED matrix as means of displaying the video game movement. Finally, we were req
    26 KB (4,328 words) - 07:36, 18 December 2021
  • S22: TBD
    THE BEST DRIVER ...lizes periodic tasks (running at 1Hz, 10Hz, and 100Hz) to gather, process, and display data from various embedded modules.
    56 KB (8,515 words) - 06:43, 28 May 2022
  • S22: Testla
    ...e application development. Project development started in February of 2022 and ended in May. * Driver & LCD Manager
    48 KB (7,183 words) - 00:51, 16 May 2023
  • S22: Road Runner
    '''!!! MAKE SURE YOU BUY AN RC CAR THAT HAS RELIABLE PWM ESC AND A BUILT-IN RPM SENSING MECHANISM !!!''' ...ive of self navigating and object avoidance, one of the basic requirements and functionality of an autonomous vehicle.
    79 KB (11,537 words) - 06:53, 28 May 2022
  • S22: Silver Arrow
    ...oid obstructions in its route, the car combines input from several sensors and make decisions to navigate itself  to the destination location * Bridge and Sensor Controller
    79 KB (11,596 words) - 18:46, 28 May 2022
  • F22: DDRTOS
    ...of the project. Our project name, DDRTOS, is a combination of the game DDR and RTOS which runs the project. * Good visual and audible response when hitting notes at the right time
    34 KB (5,552 words) - 18:35, 15 December 2022
  • F22: Bob Burgers
    ...maximum number of goals, a victor will be crowned. Press the reset button and let’s go again!!! Soccer Pong brings a new flavor to a historic game, tak The main objecive of this game was to create a simple pong game and then change it to something more unique. The following were the objectives:
    29 KB (4,632 words) - 22:57, 16 December 2022
  • F22: Thunder Flash
    [[File:Top image.png|right|500px|thumb|Traditional Bow and Arrow Game on Windows]] == '''Bow and Arrow''' ==
    27 KB (4,191 words) - 03:56, 15 December 2022
  • S23: Meh-sla Automotive
    ...at communicate with each other via CAN bus along with the required sensors and a mobile app that communicates with one of the SJ2 boards via Bluetooth. '''1) Sensor and bridge controller: '''
    63 KB (9,706 words) - 04:18, 27 May 2023
  • S23: X Æ A-13
    ...vides the technical advancements achieved in hardware-software integration and algorithm implementation for the successful development of the prototype. * Driver Node
    69 KB (9,855 words) - 18:55, 27 May 2023

View (previous 100 | next 100) (20 | 50 | 100 | 250 | 500)

Retrieved from "http://socialledge.com/sjsu/index.php/Special:Search"