Search results

From Embedded Systems Learning Academy
Jump to: navigation, search
  • ...previous laboratory experiments on FreeRTOS operating system, building SPI and I2C drivers, configuring ports, etc. to accomplish the main goal. ...his project are an ARM7 LPC2148 Development Board, ShiftBrite LED modules, and light color sensor ADJD-S311-CR999.
    18 KB (2,791 words) - 17:41, 25 May 2012
  • ...bass response. Using a 16- channel PWM driver with serial interface each LED is independently controlled to a configurable 12- bit intensity control. *Interface SPI communication between microcontroller and TLC5940
    18 KB (2,836 words) - 19:22, 25 May 2012
  • * 512K ROM, 64K(96K) RAM, 1M(2M) SPI Flash, and Micro-SD for storage. *: Arm Cortex-M4 variant contains 96K RAM, and 2Mb SPI flash
    20 KB (2,948 words) - 17:58, 7 February 2018
  • #* low_level_init() sets up minimal UART0 Driver and prints out CPU speed #* high_level_init() initializes SPI Flash and SD Card Signals
    3 KB (478 words) - 20:34, 2 August 2013
  • ...ipment which has been released to the market incorporates no intelligence, and the functionality is superficial at best. ...presence of occupants, incorporates the diurnal cycle into its decisions, and enables supervisory devices to request changes to the system configuration.
    68 KB (10,476 words) - 20:28, 20 December 2012
  • ...ing a house by roaming around an environment, navigating around obstacles, and sounding an alarm whenever foreign motion is detected. * Waymond Chen: Front motor control and distance sensor programming
    31 KB (4,981 words) - 22:00, 4 February 2013
  • ...8x8 RGB LED clock allows for the information to be displayed in any color, and dynamic. ...the project, the LPC1758 will take the input from the Front-End interface and output the results on the Back-End interface. Only the current time is take
    44 KB (7,244 words) - 21:07, 23 May 2013
  • accessory addresses these issues. To make a bike smarter and to address the issues which making bike-riding safe and bikes secure.
    25 KB (3,859 words) - 10:40, 27 May 2018
  • ...ncept of CAN bus which is used for communication between sensors, switches and lights of different coaches of the train. == Objectives and Scope ==
    39 KB (6,149 words) - 23:44, 9 December 2014
  • ...r will be able to use a web or mobile application to view security reports and change settings remotely. ...alerts and a cross-device web application, monthly fees can be eliminated and security can be placed into the property owner's hands.
    33 KB (5,223 words) - 04:30, 20 July 2014
  • * The Wiki will remain here for general references about the SJ-One board, and to document student reports. ...capability of sinking that much more current. For example, with a 5v BUS, and 1K pull-up, each device must be able to sink 5mA.
    12 KB (1,979 words) - 20:06, 25 January 2019
  • The Line Following Robot detects a black line on a white surface and moves forward following the line. If a black line is not detected, the Lin ...e Dual Serial Motor Controller, two brushed DC motors, twin motor gearbox, and two tires.
    64 KB (10,131 words) - 05:05, 7 December 2013
  • A Moderately Fancy LED Display ...f household LED lights (i.e. Christmas lights) via a microcontroller. The LED display will be synced to a song playback.
    18 KB (2,773 words) - 03:07, 2 December 2013
  • ...e SJSU board. The microcontroller will interpret the message and drive the LEDs via an SPI interface to display the message on the POV device. ...nted onto the mechanical POV device and the microcontroller will drive the LEDs to produce the message. A website will be setup to provide a user interfac
    17 KB (2,778 words) - 02:04, 8 December 2013
  • ...ering). The second board will be mounted on the car and control the servo and motor controller with a front proximity sensor. * Control for steering servo and speed throttle control
    9 KB (1,391 words) - 03:56, 8 December 2013
  • ...60 degrees around and, will trigger the camera shutter in sync with travel and will also have the ability to pan as it travels. 1. Learn about the camera interface and how designs differ in order to protect the circuits inside the camera.
    20 KB (3,315 words) - 02:15, 9 December 2013
  • simplify the driver’s task of parking a car in a garage. The parking assistant will automatic assistant will notify the driver of the vehicle's position relative to a predetermined stop point. When the
    28 KB (4,283 words) - 03:54, 8 December 2013
  • ...ncept of CAN bus which is used for communication between sensors, switches and lights of different coaches of the train. == Objectives and Scope ==
    39 KB (6,149 words) - 23:38, 9 December 2014
  • ...d in many places, for creating many creative toys that will keep your kids and pets occupied, can be integrated with shopping carts, so that you’ll neve ...his is achieved with help of multiple distance sensors mounted on a robot, and a target reference object. Robot continuously monitors the position of targ
    34 KB (5,774 words) - 23:42, 6 August 2014
  • ...rrive at a station. The pods are to navigate the track system autonomously and communicate updates on their location to the master computer. This project **Pods must communicate their location to a master computer and tell the master computer when ready for new route.
    32 KB (5,298 words) - 00:00, 7 August 2014
  • The Wireless LED Display is a 128x32 RGB LED array that displays text and graphics that a user can control over a Wi-Fi interface from a client PC. '''Charles MacDonald''' - Hardware design, display driver<br>
    5 KB (768 words) - 22:31, 31 January 2015
  • ...e avoidance algorithm </B>. It also Increases or Decreases speed on Uphill and downhill (using <B> PID Algorithm</B>)as well as applies breaks at required 1) <B>Driver Controller:</B> Detection and avoidance of the obstacles coming in the path of the RC car by following Ob
    102 KB (15,424 words) - 06:53, 23 May 2020
  • ...RC car. Development of the R.C car's subsystem modules was divided amongst and performed by seven team members. Each team member lead or significantly con == INTRODUCTION AND OBJECTIVES ==
    95 KB (14,239 words) - 16:37, 1 June 2019
  • ...ated to Chi Lam, a beloved friend, dedicated Computer Engineering student, and member of this team. <br> <br> ...ng autonomous car in a 15 person team. The car utilizes several components and sensors in order to get from Point A to Point B. Implementation of the car
    72 KB (10,983 words) - 19:43, 5 March 2015
  • ...controlling the speed and direction of the car based on the accelerometer and gyroscope enabled on the device. In this way, the user can take control of # The app would compute the checkpoints and distance and feed the information to the on-board communication controller.<br>
    112 KB (17,973 words) - 02:01, 24 December 2014
  • CAN controlled RGB LED cubes ...input from User and other LED cube will display characters one by one. The LED cubes will be connected to their respective SJ
    22 KB (3,484 words) - 15:58, 27 May 2015
  • ...d, or by communicating with a NFC-compatible device, or RFID tags, tokens, and cards. Sensors and other components used:
    33 KB (5,493 words) - 14:51, 3 June 2015
  • ...izer simulated by LED's, an MP3 audio decoder integrated circuit (VS1053), and equalizer analyzing IC (MSGQE7). ...z, 400Hz, 1kHz, 2.5kHz, 6.25kHz, and 16kHz. Commonly seen on audio devices and media software like Windows Media Player or VLC Media Player are simulated
    19 KB (2,958 words) - 05:12, 26 May 2015
  • ** Quality of technical challenges and solutions adopted. ...eceived and team members looked over the schematics of the necessary parts and designed the schematics for the project.
    5 KB (758 words) - 05:50, 17 April 2015
  • ** Quality of technical challenges and solutions adopted. ...ariable difficulty. Prepare to test your ability to think into the future and your proficiency at connecting your pieces against an ideal player.
    34 KB (5,047 words) - 06:23, 26 May 2015
  • ...self-balancing robot. There are two parts to the system: motor controller and geographic controller. Each control system is implemented into different bo ...lement a self-balancing algorithm which uses the input of an accelerometer and gyroscope module. The geographic control board provides directional movemen
    23 KB (3,701 words) - 02:43, 27 May 2015
  • ...is approaching MELN, depending on the distance of the object detected, The LED matrix will change into a pair of close eyes or a pair of open alert eyes. ..., it will change the display to an alert MENL by having its eyes wide open and the color of the eyes change to yellow to emote a warning color.
    13 KB (2,246 words) - 04:50, 26 May 2015
  • [[File:CMPE244 S16 FantasticFour Clock with LED Disp and RGB Lighting.jpeg|centre|600px]] ...also has a flex sensor that can detect whether the user is in bed or not, and is used to turn off the alarm once the user gets out of bed.
    19 KB (2,828 words) - 04:20, 29 May 2016
  • ...terrains as well as a master controller with obstacle avoidance algorithms and steering control to direct the car to its final destination. | Sensors, motors and master controller are integrated and tested.
    68 KB (10,136 words) - 20:25, 5 January 2016
  • ...es of a piano using IR proximity sensors as keys. At activation, the key's LED will light up. The number of keys of the piano will cover one key short of ...s motion activated keys, a real-time MIDI decoder to play piano notes, and LEDs that activate along with the activation of its associated key. The electron
    22 KB (3,566 words) - 17:56, 19 December 2015
  • ...of plotting the LED matrix while the car's board is in charge of sending X and Y coordinates. * LED matrix that can draw out the path the car is taking
    17 KB (2,774 words) - 16:29, 19 December 2015
  • ...em can be confident that his or her plant is growing in perfect conditions and will be notified otherwise via an LCD screen. This project is a self watering, self lighting, and temperature alerting plant grower.<br>
    18 KB (3,021 words) - 06:58, 19 December 2015
  • '''Real-time system for acquiring, monitoring and distributing miscellaneous sensor data.''' OpenSJ Bluz - A project which aims to develop a system to collect, analyze and distribute sensor data in real-time.
    50 KB (7,709 words) - 21:20, 24 May 2016
  • ...d to power of that frequency, taken as the complex square root of the real and imaginary parts. ...e domain to frequency domain and display the frequency and amplitude using LED matrix.
    11 KB (1,664 words) - 20:07, 25 May 2016
  • ...t detection, rejection and sorting with the help of wireless communication and image processing. ...le of simple sorting using servo motor based on the result of object color and shape detection algorithms running on raspberry pi 2.
    38 KB (6,048 words) - 13:58, 24 May 2016
  • == Wireless LED Text Display == ...xt display scrolls the multicolored text message on the serially connected LED panels. To enable the wireless transmission, the webapp is accessing the IP
    18 KB (2,930 words) - 04:20, 23 May 2016
  • ...e wanted the user to be able to interact with the machine by turning it on and off with a power button, as well as control the flippers with push buttons ...a real-time score machine, servos for powering the flippers, and different LEDs that will display different color patterns throughout the entire session of
    15 KB (2,487 words) - 20:14, 26 May 2016
  • == Spartan And Furious == ...embedded system, it takes all kinds of information through various sensors and try to give results in the form of travelling from point A to point B. In t
    64 KB (10,005 words) - 23:21, 15 December 2017
  • ...must be able to be given a destination through an interfacing application and it must be able to travel to that location. ...llows the direction based on the data that is provided by the sensors, GPS and compass values.
    73 KB (11,273 words) - 20:14, 23 December 2016
  • ...ntrolled that will take its destination from the user on the Android phone and drive itself to that destination. Our car has sensors to detect the obstacl ...Area Network) Bus. These five controllers form five modules of the project and are interfaced to different peripherals depending upon their functionality.
    76 KB (10,965 words) - 07:50, 1 May 2017
  • ** Quality of technical challenges and solutions adopted. ...through I2C interface. The LED matrix display will light up row and column LEDs depending on the spectral component present in it. The features of this pro
    6 KB (861 words) - 20:05, 21 March 2017
  • parsed by the SJSUone board. The team will also create the LED array grid that will be used to able to take an input audio signal (using a regular audio cable/jack) and display some kind of
    25 KB (4,152 words) - 03:51, 2 June 2017
  • [[File:CmpE244_S17_T5_SHG_android.jpg|300px|thumb|center|Wearable and Android App]] ...ble Bluetooth based Android application which will record the same details and makes it to available to the user. These can be recorded on a day-to-day ba
    37 KB (5,508 words) - 22:34, 10 May 2018
  • ...ents. We introduce "Halo", a smart helmet which makes bicyclists feel safe and stand out on busy roads, thus improving their safety. ...wireless hardware. Hence, this module serves as an API to channelize data and enable efficient message passing between modules.
    34 KB (5,475 words) - 20:02, 11 June 2017
  • '''Motor Controller:''' This controller drives the DC motor and Servo in the car.<br> ...h the help of location details provided by GPS and the orientation(bearing and heading angle) provided by the compass.<br>
    76 KB (11,843 words) - 08:28, 23 December 2017

View (previous 50 | next 50) (20 | 50 | 100 | 250 | 500)