S14: Data Acquisition using CAN bus

From Embedded Systems Learning Academy
Revision as of 22:27, 6 March 2014 by Proj user9 (talk | contribs) (Team Members & Responsibilities)

Jump to: navigation, search

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Project Title

Abstract

Our project is to implement a high speed data acquisition system using CAN and storing the data into the SD card. Our system will collect data from sensors over multiple nodes and transmit the data over the CAN bus. The CAN packets are received by a single node and stored into the SD card. We will use SPI bus protocol to communicate with SD card. The purpose is to gather all the data simultaneously over the CAN bus.

Figure 1 shows the system block diagram:

CMPE240 F14 DASC1.JPG


Objectives & Introduction

Our idea is to use the on board accelerometer and gyroscope together as a motion/gesture sensor to identify the motion then it will send to the other board via CAN bus. We are planning to use 9 degree of freedom MPU-9150 sensor for doing precise movement tracking. Recognized movement will trigger predefined tasks and transmit to Android phone via UART-Bluetooth module. More sensors will also be added to do data acquisition.

Team Members & Responsibilities

  • Shweta Bohare
    • Can bus Interface
  • Mradula Nayak
    • Can bus Interface
  • Heng Zhang
    • Accelometer and sensors
  • Chris Ng
    • UART-Bluetooth interface with Android phone
  • All Team
    • FreeRTOS Software Design
    • 3D on the computer

Schedule

Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.

Week# Start Date End Date Task Actual
1 2/25 2/29
  • Order sensors
  • System design
Completed. Waiting for the parts.
2 3/1 3/7 Interface with sensors Completed?
4 3/15 3/21 Develop CAN communication and SPI microSD I/O
5 3/22 3/28
  • Build MPU-9150 data processing algorithm
  • Can use Arduino for debugging platform
6 3/29 4/11 Test MPU-9150 data processing algorithm
7 4/12 4/18 Design Android App to receive/send signal via Bluetooth
8 4/19 4/25 Implement motion tracking algorithm on ARM-android system
9 4/26 5/5 Testing and remove bugs, further enhancements
10 5/8 5/8 Demo

Parts List & Cost

</tr>
Parts Cost Comment

SJ One Board[1]

$80.00 x3

Each board uses for different functions

MPU-9150[2]

$39.95 x1

9 DOF motion sensor

BC-127[3]

$49.95 x1

Bluetooth module to UART/SPI

Total Cost

$$$$$

Keep it low

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

Send me your zipped source code and I will upload this to SourceForge and link it for you.

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.