S15: Rubik's Cube Solver
Contents
Project Title
Abstract
This section should be a couple lines to describe what your project does.
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
Team Members & Responsibilities
- Nikhil Chaturvedi
- Cube solving algorithm
- Interface SJOne with cube solving arms
- Bluetooth connectivity from console to SJOne board
- Preeti Benake
- Python console for selecting the top face of the cube and Bluetooth interface
- Build the cube solving arms
- Rajashree Kambli
- Python console for selecting the top face of the cube and Bluetooth interface
- Interface cube algorithm with arms
- Shahid Qureshi
- Bluetooth connectivity from console to SJOne board
- Build the cube solving arms
Team Schedule
| Sl.No | Start Date | End Date | Task | Status | Actual Completion Date |
|---|---|---|---|---|---|
| 1 | 02/28/2015 | 03/02/2015 | Finalized high level design architecture | Completed on time | 03/02/2015 |
| 2 | 02/28/2015 | 04/17/2015 | Investigating Robotic arm design; eliminated few hardware options. | Ongoing | --/--/2015 |
| 3 | 03/07/2015 | 03/09/2015 | Investigated interfacing console with SJOne board. | Completed on time | 03/09/2015 |
| 4 | 03/10/2015 | 03/14/2015 | Investigated BlueZ Bluetooth stack for Python and C. | Completed on Time | 03/14/2015 |
| 5 | 03/29/2015 | 04/17/2015 | Implementing Bluetooth interfacing of SJOne board using C BlueZ and Console using PyblueZ | Ongoing | --/--/2015 |
| 6 | 04/08/2015 | --/--/2015 | Investigating implementation of Rubik cube solving algorithm (Kociemba's algorithm) | Ongoing | --/--/2015 |
Parts List & Cost
Give a simple list of the cost of your project broken down by components. Do not write long stories here.
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
My Issue #1
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
