S21: exFAT

From Embedded Systems Learning Academy
Revision as of 17:30, 17 May 2021 by Proj user11 (talk | contribs) (Parts List & Cost)

Jump to: navigation, search

Project Title

exFAT project title here.



Abstract

As the capstone project for this class, we designed, prototyped, implemented, and tested an autonomous RC car. Our RC car platform of choice was built by Traxxas as it has a great reputation for building durable RC chassis. On this chassis, we mounted ultrasonic sensors to detect objects surrounding the car and allow it to steer clear of them, a GPS and compass unit that can output important GPS coordinates and heading, a bluetooth module that communicated these location and orientation data to the SJ2 boards, a pair of optical encoders that can detect the car's speed and direction of acceleration, and an LCD screen that provides some important real-time metrics for our debugging purposes. In addition to this debugging method, we also used the provided PCAN dongle to observe CANBus readings and confirm that we were seeing expected values transmitted. Finally, our development of the project was test-driven, using unit tests to confirm the functionality of some code prior to its usage on the car. The rest of this report will detail more specifics about the methodology behind the development of each module.

Introduction

The project was divided into 5 modules:

  • Sensor
  • Motor
  • Geo Controller
  • Driver/LCD Controller
  • Web application

Team Members & Responsibilities

<Team Picture>

Gitlab Project Link - [1]

  • Driver/Master Controller & LCD
    • All of us


Week Start Date End Date Task Person in Charge (PIC) Status
1 Feb 27, 2021 March 5, 2021 First team meetup to discuss the direction of the project, reviewed past projects and report our findings/concerns All Complete
2 March 6, 2021 March 13, 2021 Divide the tasks & responsibilities among the team All Complete
3 March 14, 2021 March 21, 2021 Finalize / Buy Parts All Complete
3 March 14, 2021 March 21, 2021 Delegate Tasks All Complete
3 March 14, 2021 March 21, 2021 Get Data from Ultrasonic Sensor Eishan, David Complete
3 March 14, 2021 March 21, 2021 Get Data from Infrared Sensor Eishan, David Complete
3 March 14, 2021 March 21, 2021 Initial Draft for common DBC file for sensor readings Eishan, David Complete
3 March 14, 2021 March 21, 2021 Get Data from GPS & CMPS14 Suryanto, Ka Complete
3 March 14, 2021 March 21, 2021 Develop Bluetooth Driver (UART + customized line buffer) Tyler Complete
4 March 21, 2021 March 28, 2021 Initial UI Setup for Mobile App Tyler Complete
4 March 21, 2021 March 28, 2021 Bluetooth "Hello World" Tyler Complete
4 March 21, 2021 March 28, 2021 Build Driver Controller To Control Motor Suryanto, Ka Complete
4 March 21, 2021 March 28, 2021 Disassembly RC Car and Evaluation of Components Manas Complete
4 March 21, 2021 March 28, 2021 Complete Motor Drive Development with basic PID control. Manas Complete
5 March 21, 2021 March 28, 2021 Implement Bluetooth on Motor for wireless debugging Manas Complete
5 March 28, 2021 April 04, 2021 Master Controller Integration All Complete
5 March 28, 2021 April 04, 2021 Send Heading / Bearing / Distance info over CANBus to the Driver Node Suryanto, Ka Complete
5 March 28, 2021 April 04, 2021 Display Compass, GPS, Steering angle, and Acceleration info on the LCD screen. Manas, Suryanto Complete
5 March 28, 2021 April 04, 2021 Research and implement power solution for powering SJ2 boards w/ peripherals Eishan, Tyler Complete
5 March 28, 2021 April 04, 2021 Design and Order PCB. Eishan, Ka, Suryanto Complete
6 April 04, 2021 April 11, 2021 Map PWM Duty Cycles to real speed (KmPH) readings. Manas Complete
6 April 04, 2021 April 11, 2021 Design, 3D print, and assemble LED ring. Tyler Complete
6 April 04, 2021 April 11, 2021 Complete required elements of mobile application Tyler Complete
6 April 04, 2021 April 11, 2021 Deploy webpage to web server Tyler Complete
6 April 04, 2021 April 11, 2021 MIA handling for GPS module Suryanto, Ka Complete
6 April 04, 2021 April 11, 2021 Test LED ring which shows the compass info Suryanto, Ka Complete
7 April 11, 2021 April 18, 2021 Create Collision Avoidance Algorithm Module Suryanto, Ka Complete
7 April 11, 2021 April 18, 2021 Create Pathing from GPS Data Suryanto, Ka Delayed
7 April 11, 2021 April 18, 2021 Hardware Integration Test and First Field Test All Complete
7 April 11, 2021 April 18, 2021 Optimize Obstacle Detection Based On First Field Test Result (if needed) Suryanto, Ka Complete
8 April 18, 2021 April 25, 2021 Design and Print Mounting Components Tyler Complete
9 April 25, 2021 May 02, 2021 PCAN / BusMaster Configuration on car. All Complete
10 May 02, 2021 May 09, 2021 CANBus Integration All Complete
11 May 09, 2021 May 16, 2021 MIA Integration All Complete
12 May 16, 2021 May 23, 2021 Big Integration and Live Field Test (Split into 2) All In Progress
12 May 16, 2021 May 23, 2021 System Debug & fine tuning All In Progress
13 May 23, 2021 May 28, 2021 Demo Prep All In Progress
13 May 23, 2021 May 28, 2021 Wiki Report All In Progress

Parts List & Cost

Item # Part Description Vendor Quantity Total Cost
1 GPS Breakout board Adafruit 1 $39.75
2 GPS Antenna Amazon 1 $8.43
3 CMPS14 RobotShop 1 $35.31
4 HC05 Amazon 1 $13.59
5 CAN Transceiver Waveshare 5 $21.45
6 Infrared sensor(s) Amazon 1 $10.89
7 Ultrasonic sensor(s) Amazon 3 $81.78
8 SJTwo Evaluation Board Amazon 6 $330
9 Traxxas Rustler Traxxas 1 $169.99
10 Traxxas Battery + Charger Traxxas 1 $59.99
11 High Capacity Battery Traxxas 1 $69.99
12 RPM sensor Traxxas 1 $12.00
13 LED ring 8 LEDs (Cat shape) DIY 1 N/A


Printed Circuit Board


Pcb schematic.png



CAN Communication

<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

Hardware Design

<Show your CAN bus hardware design>

DBC File

In our DBC file, we have 6 nodes, DRIVER, SENSOR, BRIDGE, GEO CONTROLLER, COMPASS, and MOTOR. Each of them represents a message sends from one node to another via the CAN bus.


1. The DRIVER sends the throttle and wheel angle command to the MOTOR so it knows when to speed up, speed down and turn.
2. The SENSOR sends the information about how far away is each of the Ultrasonic sensors away from the obstacles
3. The BRIDGE sends the GPS destination to the GEO Controller
4. The GEO CONTROLLER sends the current location of the car back to the BRIDGE
5. The GEO CONTROLLER sends the heading, bearing, and the distance from the destination to the DRIVER
6. The MOTOR sends the PWM and current speed information to the DEBUG node.


Gitlab link to the dbc file

VERSION "1.0.0"

BU_: DRIVER SENSOR BRIDGE GEO_CONTROLLER COMPASS MOTOR

BO_ 100 DRIVER: 3 DRIVER
SG_ DRIVER_throttle : 0|16@1- (0.1,-11) [-11.1|11.1] "kph" MOTOR
SG_ DRIVER_wheel_angle: 16|8@1- (1,-4) [-4|4] "degree" MOTOR

BO_ 200 SENSOR: 5 SENSOR
 SG_ SENSOR_sonar_front_left : 0|10@1+ (1,0) [0|0] "cm" DRIVER
 SG_ SENSOR_sonar_front_mid : 10|10@1+ (1,0) [0|0] "cm" DRIVER
 SG_ SENSOR_sonar_front_right : 20|10@1+ (1,0) [0|0] "cm" DRIVER
 SG_ SENSOR_infrared_back_mid : 30|10@1+ (1,0) [0|0] "cm" DRIVER

BO_ 205 GPS_DESTINATION: 7 BRIDGE
 SG_ LATITUDE_DEGREE : 0|8@1- (1, -90) [-90|90] "degree" GEO_CONTROLLER
 SG_ LONGITUDE_DEGREE : 8|9@1- (1, -180) [-180|180] "degree" GEO_CONTROLLER
 SG_ LATITUDE_MINUTE : 17|6@1+ (1, 0) [0|60] "minute" GEO_CONTROLLER
 SG_ LONGITUDE_MINUTE : 23|6@1+ (1, 0) [0|60] "minute" GEO_CONTROLLER
 SG_ LATITUDE_SECOND : 29|13@1+ (0.01, 0) [0|60] "second" GEO_CONTROLLER
 SG_ LONGITUDE_SECOND : 42|13@1+ (0.01, 0) [0|60] "second" GEO_CONTROLLER

BO_ 206 GPS_CURRENT_LOCATION: 7 GEO_CONTROLLER
 SG_ LATITUDE_DEGREE : 0|8@1- (1, -90) [-90|90] "degree" BRIDGE
 SG_ LONGITUDE_DEGREE : 8|9@1- (1, -180) [-180|180] "degree" BRIDGE
 SG_ LATITUDE_MINUTE : 17|6@1+ (1, 0) [0|60] "minute" BRIDGE
 SG_ LONGITUDE_MINUTE : 23|6@1+ (1, 0) [0|60] "minute" BRIDGE
 SG_ LATITUDE_SECOND : 29|13@1+ (0.01, 0) [0|60] "second" BRIDGE
 SG_ LONGITUDE_SECOND : 42|13@1+ (0.01, 0) [0|60] "second" BRIDGE

BO_ 210 COMPASS_HEADING_DISTANCE: 8 COMPASS
 SG_ HEADING : 0|12@1+ (0.1, 0) [0|359.9] "degrees" DRIVER
 SG_ BEARING : 12|12@1+ (0.1, 0) [0|359.9] "degrees" DRIVER
 SG_ DISTANCE : 24|12@1+ (0.01, 0) [0|0] "meters" DRIVER

BO_ 220 MOTOR_DEBUG: 8 MOTOR
 SG_ MOTOR_PWM : 0|32@1+ (0.01, 0) [10|20] "duty cycle" DEBUG
 SG_ CURRENT_SPEED : 32|32@1- (0.1,-11) [-11.1|11.1] "kph" DEBUG




Sensor ECU

<Picture and link to Gitlab>

Hardware Design

LV-EZ4-Ultrasonic.jpg
mid

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Motor ECU

Motor Controller link

Hardware Design

The hardware portion of the motor controller required the most precision. Because we needed to detect wheel RPM to calculate the speed of the car, we resorted initially to using a Hall Effect sensor and bracket sold by Traxxas. After conducting advanced field testing with this setup, we found out that the magnet's position on the bracket that attached it to the drive gear affected the readings output by the Hall Effect sensor. Sometimes, if the magnet was in the perfect position to trigger the Hall Effect sensor, the car would detect it was moving, though it was stationary. To get the car moving, we usually had to bump it forwards to move the magnet's position; as expected however, this solution is not robust since in the sensor's normal use case, the user would be using a wirelessly transmitting remote to control the car's movement.

To rectify this minor roadblock, we decided to switch to a set of optical wheel encoders. These would allow the same RPM detection as done by the Hall Effect sensor, but without the issue of the car detecting its own movement whilst at a standstill. Additionally, we were able to use a second wheel encoder in conjunction with the first so that we could also detect reverse motion.

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Geographical Controller

Link To Gitlab

Hardware Design

We used the Ultimate GPS Breakout v3 and an antenna to better receive the GPS signal.

For the GPS module, it sends several NMEA sentences but we only look for the $GPGGA ones. Therefore, we had to change the settings of the modules using a USB to UART bridge to send the command to the GPS module.


Ultmate gps breakout.jpg
mid
mid

Software Design

<List the code modules that are being called periodically.>


void periodic_callbacks__10Hz(uint32_t callback_count) {

  // receive desintation coordinates from the web app (sensor/bridge controller)
  gps__receive_message(can1); 

  gps__run_once();

  // transmit current gps coordinates to the web app (sensor/bridge controller)
  gps__transmit_msg_to_bridge(can1); 

  // transmit compass heading, bearing, distance to the driver (driver controller)
  cmps14__transmit_message(can1);  

  led_ring_turn_on_led_north();

  count = gps_fix_led_logic(gpio_input_p2_0, gpio_output_p1_18, count);
}

Technical Challenges

< List of problems and their detailed resolutions>

/*** TEMPORARY NOTES ***/

1. Encountered issues with getting fixed coordinates. Fixed it by obtaining external antenna and plugging in CR1220 as a backup battery.



2. The dbc format can support up to only 6 decimal point, which is not accurate when it is being used to store the GPS coordinates. Fix by using the Degrees Minutes Seconds format.

/***********************/





Communication Bridge Controller & LCD

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Master Module

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Mobile Application

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>






Conclusion

<Organized summary of the project>

<What did you learn?>

Project Video

Project Source Code

Our source code is on Gitlab.


Advise for Future Students

<Bullet points and discussion>

Acknowledgement

References