Difference between revisions of "S21: exFAT"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Parts List & Cost)
(Parts List & Cost)
Line 321: Line 321:
 
| 2
 
| 2
 
| style="vertical-align:bottom;" | GPS Antenna
 
| style="vertical-align:bottom;" | GPS Antenna
| Amazon
+
| [https://www.amazon.com/Bingfu-Waterproof-Navigation-Connector-Tracking/dp/B07R7RC96G/ref=sr_1_2?_encoding=UTF8&c=ts&dchild=1&keywords=GPS+Antennas&qid=1618287997&s=gps&sr=1-2&ts_id=3248676011 Amazon]
 
| 1
 
| 1
 
| style="text-align:right; vertical-align:bottom;" | $8.43
 
| style="text-align:right; vertical-align:bottom;" | $8.43
Line 327: Line 327:
 
| 3
 
| 3
 
| style="vertical-align:bottom;" | CMPS14
 
| style="vertical-align:bottom;" | CMPS14
| RobotShop
+
| [https://www.robotshop.com/en/tilt-compensated-magnetic-compass-cmps14.html RobotShop]
 
| 1
 
| 1
 
| style="text-align:right; vertical-align:bottom;" | $35.31
 
| style="text-align:right; vertical-align:bottom;" | $35.31
Line 333: Line 333:
 
| 4
 
| 4
 
| style="vertical-align:bottom;" | HC05
 
| style="vertical-align:bottom;" | HC05
| Amazon
+
| [https://www.amazon.com/DSD-TECH-HC-05-Pass-through-Communication/dp/B01G9KSAF6/ref=sr_1_4?dchild=1&keywords=HC05&qid=1618288064&s=electronics&sr=1-4 Amazon]
 
| 1
 
| 1
 
| style="text-align:right; vertical-align:bottom;" | $13.59
 
| style="text-align:right; vertical-align:bottom;" | $13.59
Line 356: Line 356:
 
|-
 
|-
 
| 8
 
| 8
| style="vertical-align:bottom;" | SJTwo
+
| style="vertical-align:bottom;" | SJTwo Evaluation Board
| Amazon
+
| [https://www.amazon.com/Generic-SJTwo-SJ2-SJSU/dp/B08G9LRPZ8/ref=sr_1_1?dchild=1&keywords=SJTwo&qid=1618288104&s=electronics&sr=1-1 Amazon]
 
| style="vertical-align:bottom;" | 6
 
| style="vertical-align:bottom;" | 6
 
| style="text-align:right; vertical-align:bottom;"  | $330
 
| style="text-align:right; vertical-align:bottom;"  | $330

Revision as of 04:29, 13 April 2021

Project Title

exFAT project title here.



Abstract

Add a few sentence abstract here.

Introduction

The project was divided into 5 modules:

  • Sensor
  • Motor
  • Geo Controller
  • Driver/LCD Controller
  • Web application

Team Members & Responsibilities

<Team Picture>

Gitlab Project Link - [1]



Schedule

Week Start Date End Date Task Person in Charge (PIC) Status
3 March 14, 2021 March 21, 2021 Finalize / Buy Parts All Complete
3 March 14, 2021 March 21, 2021 Delegate Tasks All Complete
3 March 14, 2021 March 21, 2021 Get Data from Ultrasonic Sensor Eishan, David Complete
3 March 14, 2021 March 21, 2021 Get Data from Infrared Sensor Eishan, David Delayed
3 March 14, 2021 March 21, 2021 Initial Draft for common DBC file for sensor readings Eishan, David Complete
3 March 14, 2021 March 21, 2021 Get Data from GPS & CMPS14 Suryanto, Ka Complete
3 March 14, 2021 March 21, 2021 Finish Bluetooth Driver Development Tyler Complete
3 March 14, 2021 March 21, 2021 Webpage Setup Tyler Complete
4 March 21, 2021 March 28, 2021 Initial UI Setup for Mobile App Tyler Complete
4 March 21, 2021 March 28, 2021 Bluetooth "Hello World" Tyler Complete
4 March 21, 2021 March 28, 2021 Build Driver Controller To Control Motor Suryanto, Ka Complete
4 March 21, 2021 March 28, 2021 Disassembly RC Car and Evaluation of Components Manas Complete
4 March 21, 2021 March 28, 2021 Complete Motor Drive Development with basic PID control. Manas Complete
5 March 21, 2021 March 28, 2021 Implement Bluetooth on Motor for wireless debugging Manas In Progress
5 March 28, 2021 April 04, 2021 Master Controller Integration All In Progress
5 March 28, 2021 April 04, 2021 Send Heading / Bearing / Distance info over CANBus to the Driver Node Suryanto, Ka Complete
5 March 28, 2021 April 04, 2021 Display Compass, GPS, Steering angle, and Acceleration info on the LCD screen. Manas, Suryanto Delayed
5 March 28, 2021 April 04, 2021 Research and implement power solution for powering SJ2 boards w/ peripherals Eishan, Tyler In Progress
5 March 28, 2021 April 04, 2021 Design and Order PCB. Eishan, Ka, Suryanto In Progress
6 March 21, 2021 March 28, 2021 Map PWM Duty Cycles to real speed (KmPH) readings. Manas In Progress
6 April 04, 2021 April 11, 2021 Design, 3D print, and assemble LED ring. Tyler Complete
6 April 04, 2021 April 11, 2021 MIA handling for GPS module Suryanto, Ka Complete
6 April 04, 2021 April 11, 2021 Test LED ring which shows the compass info Suryanto, Ka Complete
7 April 11, 2021 April 18, 2021 Create Collision Avoidance Algorithm Module Suryanto, Ka Complete
7 April 11, 2021 April 18, 2021 Create Pathing from GPS Data Suryanto, Ka In Progress
7 April 11, 2021 April 18, 2021 Hardware Integration Test and First Field Test All In Progress
7 April 11, 2021 April 18, 2021 Optimize Obstacle Detection Based On First Field Test Result (if needed) Suryanto, Ka In Progress
8 April 18, 2021 April 25, 2021 Design and Print Mounting Components TBD In Progress
9 April 25, 2021 May 02, 2021 PCAN / BusMaster Configuration on car. All In Progress
10 May 02, 2021 May 09, 2021 CANBus Integration All In Progress
11 May 09, 2021 May 16, 2021 MIA Integration All In Progress
12 May 16, 2021 May 23, 2021 Big Integration and Live Field Test (Split into 2) All In Progress
12 May 16, 2021 May 23, 2021 System Debug & fine tuning All In Progress
13 May 23, 2021 May 28, 2021 Demo Prep All In Progress
13 May 23, 2021 May 28, 2021 Wiki Report All In Progress

Parts List & Cost

Item # Part Description Vendor Quantity Cost
1 GPS Breakout board Adafruit 1 $39.75
2 GPS Antenna Amazon 1 $8.43
3 CMPS14 RobotShop 1 $35.31
4 HC05 Amazon 1 $13.59
5 CAN Transceiver Waveshare 5 $21.45
6 Infrared sensor(s) Amazon 1 $10.89
7 Ultrasonic sensor(s) Amazon 3 $81.78
8 SJTwo Evaluation Board Amazon 6 $330
9 Traxxas Rustler Traxxas 1 $169.99
10 Traxxas Battery + Charger Traxxas 1 $59.99
11 RPM sensor Traxxas 1 $12.00


Printed Circuit Board

<Picture and information, including links to your PCB>



CAN Communication

<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

Hardware Design

<Show your CAN bus hardware design>

DBC File

<Gitlab link to your DBC file> <You can optionally use an inline image>




Sensor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Motor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Geographical Controller

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>





Communication Bridge Controller & LCD

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Master Module

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Mobile Application

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>






Conclusion

<Organized summary of the project>

<What did you learn?>

Project Video

Project Source Code

Advise for Future Students

<Bullet points and discussion>

Acknowledgement

References