Difference between revisions of "S17: Interactive Snake and ladder"

From Embedded Systems Learning Academy
Jump to: navigation, search
(→‎Schedule)
(→‎Hardware Design)
Line 157: Line 157:
  
 
=== Hardware Design ===
 
=== Hardware Design ===
−
Discuss your hardware design here.  Show detailed schematics, and the interface here.
+
=====Schematic Diagram=====
 +
 
 +
 
 +
=====PCB Layout=====
  
 
=== Hardware Interface ===
 
=== Hardware Interface ===

Revision as of 04:44, 11 April 2017

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Project Title

Snake and Ladder

Abstract

Interactive Snake and Ladder is a simulation of traditional snake and ladder game using SJONE board,LCD and 2 wireless remotes. LCD display is connected to the SJONE board will display the game board. 2 wireless remotes will be interfaced with SJONE board to simulate dice functionality for two users.

Objectives & Introduction

  • Features:
    • Simulation of snake and ladder game.
    • 2 Wireless module to simulate dice functionality.
    • Speech output for events
  • Challenges:
    • PCB designing to avoid electrical interference
    • Algorithm development for snake and ladder game.
    • Achieving high refresh rate on LCD to get real time display effect
    • Figuring out communication protocol for wireless

Roles & Responsibilities

Schedule

Week Start Date End Date Task Status Actual Completion Date
1 3/21 3/25
  • Requirement analysis
  • Component identification and purchase.
  • Task allocation based on different modules in project
 Complete 3/25
2 3/25 3/29
  • Design Hardware schematic
 Complete 3/29
3 3/29 4/9
  • PCB design and placing order for fabrication
 Complete 4/10
4 3/29 4/8
  • Interface LCD with the SJOne board
  • Project report update on wiki
 Complete 4/8
5 3/30 4/14
  • Establish wireless connection between boards using nordic wireless
  • Text to speech interface
  • Project report update on wiki
 In Progress
6 4/11 4/20
  • Algorithm design and implementation
  • Identify common data elements
 In Progress
7 4/20 4/22
  • Integration of modules and hardware package buildup
 Plan
8 4/23 4/31
  • Integration testing and bug fix
  • Project report update on wiki
 Plan
9 4/26 5/5
  • Extra feature identification and implementation
  • Project report update on wiki
 Plan
10 5/5 5/14
  • Testing and Debugging
  • Project report update on wiki and final presentation
Plan
11 5/15 5/23
  • Wiki Report completion and Final Demonstration
Plan

Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Schematic Diagram
PCB Layout

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.

Retrieved from "http://socialledge.com/sjsu/index.php?title=S17:_Interactive_Snake_and_ladder&oldid=35644"