Difference between revisions of "S16: Warriors"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Hardware Design)
(Hardware Design)
Line 157: Line 157:
 
<u>Raspberry Pi </u>
 
<u>Raspberry Pi </u>
 
: Raspberry Pi is powered with Broadcom BCM2837 1.2GHz 64-bit quad-core ARMv8 processor.
 
: Raspberry Pi is powered with Broadcom BCM2837 1.2GHz 64-bit quad-core ARMv8 processor.
: --> Integrated 802.11n wireless LAN
+
: Integrated 802.11n wireless LAN
 +
:
 +
: Raspberry Pi is used as Web Server
  
 
=== Hardware Interface ===
 
=== Hardware Interface ===

Revision as of 04:54, 21 May 2016

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Project Title

Internet of Things based GPS Tracking System

Abstract

A GPS & GSM Based Vehicle Tracking combine the installation of an electronic device in a vehicle, with purpose-designed computer software to enable the company to track the vehicle's location. We are using Global Positioning System (GPS) technology for locating the vehicle. Vehicle information can be viewed in Web application.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Sujeeth Emmadi
  • Bharat Khanna
  • Veena Manasa Kanakamalla
  • Ankit Gandhi

Schedule

This section of the report provides the team schedule for the Assembly line project, indicating the milestones to be achieved during the course of the project.

SI No. Start Date End Date Task Status Actual Completion Date
1 03/21/2016 03/27/2016
  • System design and High level Block diagram
  • Parts and components identification and ordering
Completed
2 03/28/2016 04/03/2016
  • Design of Software Architecture(Flow diagram)
Completed
3 04/04/2016 04/10/2016
  • Firmware Development for I2C(Temperature Sensor) and GPS
  • Testing of individual module
Completed
4 04/11/2016 04/17/2016
  • Wifi firmware development on LPC/Raspberry PI
Completed
5 04/18/2016 04/24/2016
  • Wifi firmware development on LPC/Raspberry PI
Completed
6 04/25/2016 05/01/2016
  • Webserver development on LPC/Raspberry PI
Completed
7 05/02/2016 05/08/2016
  • Integration of all modules, Testing and debugging of the system
In Progress
8 05/09/2016 05/15/2016
  • Final testing and Documentation
In Progress

Parts List & Cost

Item# Part Description Vendor Qty Cost
1 Raspberry Pi Adafruit 1 $39.95
2 ESP8266-Wifi Module Adafruit 1 $9.95
3 SIM808 GPS/GSM Module Adafruit 1 $49.95
4 Passive GPS Antenna uFL Adafruit 1 $3.95
5 USB to TTL Serial Cable Adafruit 1 $9.95

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Raspberry Pi

Raspberry Pi is powered with Broadcom BCM2837 1.2GHz 64-bit quad-core ARMv8 processor.
Integrated 802.11n wireless LAN
Raspberry Pi is used as Web Server

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.