S15: Swarm Robots

From Embedded Systems Learning Academy
Revision as of 07:24, 21 April 2015 by Proj user5 (talk | contribs) (Schedule)

Jump to: navigation, search

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Swarm Robots

Abstract

This section should be a couple lines to describe what your project does.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Team Member 1
    • Abhishek Gurudutt
  • Team Member 2
    • Bhargava Sreekantappa Gayithri
  • Team Member 3
    • Chinmayi Divakara
  • Team Member 4
    • Praveen Prabhakaran
  • Team Member 5
    • Tejeshwar Chandra Kamaal

Schedule

Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.

Week# Date Task Actual Status
1 4/14/2015 Hardware - Design of Motor Controller, Robot assembly, Software - OpenCV environment setup, Basic video processing Hardware, OpenCV setup - Completed, Video processing - In progress. Problems Encountered - Hardware:Bug discovered in version 0.1 of motor controller circuit after testing. Software - Problems during filtering video for certain colors. Completed
2 4/21/2015 1) Communication between OpenCV to SJone board using DB9 connector and UART3

2) PWM and Ultrasonic sensor drivers 3) Object detection and mapping 4) Wireless communication between two nodes

1) Modification of RS232 header file to support windows 7 file API. Was not able to communicate between OpenCV and SJone board using UART0

2) Unable to receive the echo signal and was not able to use ultrasonic sensor without interrupt. 3) HSV values had to be detected to recognize particular color. Had difficulties to find the HSV values for a color. This was solved by writing a program to print the HSV value of the color that is pointed in the video. 4) Packet sending and recieving failure. System crash while transmitting and recieving packets

Completed
3 4/28/2015 1) PID Drivers

2) Co-ordinates communication between nodes and boundary mapping 3) Inter board communication and communicating the Co-ordinates

Scheduled 4 05/05/2015 1) Integration and testing and Bug fixing Scheduled

Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.