Difference between revisions of "S13: 2D Plotter"

From Embedded Systems Learning Academy
Jump to: navigation, search
Line 20: Line 20:
  
 
=== Team Members & Responsibilities ===
 
=== Team Members & Responsibilities ===
Team Member 1
+
Matthias Reimann & William Nguyen
 
**  Hardware Development
 
**  Hardware Development
Team Member 2
+
Sergey Tsybanov & William Nguyen
 
**  Driver Development
 
**  Driver Development
Team Member 3
+
Matthias Reimann & Sergey Tsybanov & William Nguyen
 
**  FreeRTOS Software Design
 
**  FreeRTOS Software Design
  

Revision as of 16:19, 28 April 2013

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Project Title

Abstract

This section should be a couple lines to describe what your project does.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Matthias Reimann & William Nguyen
    • Hardware Development
  • Sergey Tsybanov & William Nguyen
    • Driver Development
  • Matthias Reimann & Sergey Tsybanov & William Nguyen
    • FreeRTOS Software Design

Schedule

Schedule

WeekPlanned TasksActual Tasks

1

  • Order parts
  • Obtain documentation for Micro-controller
  • Understand what features will be used
  • Create system block diagram
  • Done
  • Done
  • Done
  • Done

2

  • Understand/Test the ordered parts
  • Start building the plotter
  • Begin interfacing the motors
  • Start the programming of the motor controllers
  • Start the programming of the CAD decoder
  • Done
  • Done
  • Done
  • Done
  • In progress

3

  • Finish interfacing the motors
  • Finish the programming of the motor controllers
  • Test interface between micro-controller, motor controllers and plotter
  • In progress
  • In progress
  • In progress

4

  • Test interface between micro-controller, motor controllers and plotter
  • Test system functionality
  • Debug any errors
  • Project report

5

  • Finalize project
  • Finalize project report

Parts List & Cost

Parts Cost
2012 SJ One Board $60
Total: $60

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

Wifi Connection Issues

Many wifi connection issues were encountered. To solve this problem, a dedicated task was created to re-connect to wifi if the connection was ever lost.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

Send me your zipped source code and I will upload this to SourceForge and link it for you.

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.