File:Hardware design tatanano.png

From Embedded Systems Learning Academy
Revision as of 01:15, 16 December 2017 by Proj user3 (talk | contribs) (This is a block diagram of our communication bridge used for tatanano car. HC-05 module is connected to sjone board using UART2 pins(Tx2 Rx2). Baud rate we chose is 115200. That bluetooth module connects to android application developed for this projec...)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search
Hardware_design_tatanano.png(778 × 437 pixels, file size: 17 KB, MIME type: image/png)

This is a block diagram of our communication bridge used for tatanano car. HC-05 module is connected to sjone board using UART2 pins(Tx2 Rx2). Baud rate we chose is 115200. That bluetooth module connects to android application developed for this project in slave mode(default for HC-05). The application can show the data sent from car on google maps like speed, location, heading, bearing etc.

File history

Click on a date/time to view the file as it appeared at that time.

Date/TimeThumbnailDimensionsUserComment
current01:19, 16 December 2017Thumbnail for version as of 01:19, 16 December 2017778 × 437 (17 KB)Proj user3 (talk | contribs)This is a block diagram of our communication bridge used for tatanano car. HC-05 module is connected to sjone board using UART2 pins(Tx2 Rx2). Baud rate we chose is 115200. That bluetooth module connects to android application developed for this projec...
01:15, 16 December 2017Thumbnail for version as of 01:15, 16 December 20171,000 × 600 (18 KB)Proj user3 (talk | contribs)This is a block diagram of our communication bridge used for tatanano car. HC-05 module is connected to sjone board using UART2 pins(Tx2 Rx2). Baud rate we chose is 115200. That bluetooth module connects to android application developed for this projec...
  • You cannot overwrite this file.

The following page links to this file:

Metadata