F22: Bob Burgers

From Embedded Systems Learning Academy
Revision as of 05:52, 15 December 2022 by 243 user1 (talk | contribs) ()

Jump to: navigation, search
Soccer Pong

Project Title

SOCCER PONG

Abstract

At the time this project was created (fall 2022), the soccer world cup was taking place. Having caught a little of the world cup fever, Soccer Pong looks to combine the gameplay from soccer and the original Pong. Two games from different mediums but with great symmetry. Two players will face each trying to avoid being scored on. A ball will bounce from any surface that is not in the penalty area. Once a player has read the set maximum number of goals, a victor will be crowned. Press the reset button and let’s go again!!! Soccer Pong brings a new flavor to a historic game, taking you into the world of soccer.

Objectives & Introduction

The main objecive of this game was to create a simple pong game and then change it to something more unique. The following were the objectives we had to reach our goal.

  • Create a Matrix Driver to display all of the visuals of the game.
  • Implement ADC joysticks controllers Driver to handle the players blocks movement
  • Implement Reset and Pause buttons using semaphores interrupts to reset the game and pause the ball movement
  • Incorporate music and special effects by adding a mp3 modules with UART interface.
  • Design a PCB that will combine all of the peripherals dfevics with the sj2 board and matrix.
  • Create a task that will refresh the matrix driver buffer with the ball and player movement.
  • Develop control system with the ability to modify speed and size of blocks
  • Create task that will handle ball movement, placement, and hit detection.
  • Incorporate the music and sound effects after specific time based events (hitting block, goal, etc).
  • Integrate the pause and reset buttons

Team Members & Responsibilities

William Hernandez

Profile picture.PNG

Responsibilities

  • Led Matrix Graphics
  • Gameplay Logic
  • Music System Integration
  • Game Objects and Hit Detection
  • Debugging and Testing


Tin Nguyen

Matthew Hanna

21CF6ADC-3151-40D7-A40F-DE8CC5FF3433 Small.jpeg

Responsibilities

  • Joystick input with ADC reading potentiometer positions for paddle movement
  • GPIO input for button pressing pause and reset
  • locking mechanism for game pausing and game reset loop entrance
  • enclosure fabrication

Schedule

Week# Start Date End Date Task Status
1
  • 10/11/2022
  • 10/11/2022
  • 10/18/2022
  • 10/18/2022
  • Read previous projects, gather information and discuss among the group members.
  • Create GitLab repository for project
  • Completed
  • Completed
2
  • 10/19/2022
  • 10/24/2022
  • Order necessary parts
  • Completed
3
  • 10/25/2022
  • 11/01/2022
  • Read and familiarize with LED Matrix Datasheet
  • Read Datasheet of all other components
  • Completed


4
  • 11/02/2022
  • 11/08/2022
  • Develop graphics driver for LED matrix and implement initial game objects
  • Develop schematic and layout of PCB
  • Completed
5
  • 11/09/2022
  • 11/09/2022
  • 11/09/2022
  • 11/09/2022
  • 11/10/2022
  • 11/15/2022
  • 11/15/2022
  • 11/15/2022
  • Finalize wiki schedule
  • Order circuit boards components and complete the design for printing
  • circuit board and component assembly
  • Circuit board testing
  • Additional accessories if required and finalization of hardware
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
6
  • 11/16/2022
  • 11/22/2022
  • Integration of circuit boards and microcontroller
  • Game logic development
  • Testing and debugging the game logic
  • Completed
  • Completed
  • Completed
7
  • 11/23/2022
  • 11/29/2022
  • Integrate game logic code with LED matrix
  • Integrate game sounds with game logic
  • Completed
  • Completed
8
  • 11/30/2022
  • 12/06/2022
  • Integrate subsystem
  • Finalizing the video game
  • Update the wiki page.
  • Adding the ending closure for the game
  • Bill of materials
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
9
  • 12/07/2020
  • 12/13/2022
  • Address bugs during testing of integrated system
  • Test pause/play functionality
  • Completed
  • Completed
  • Completed
10
  • 12/14/2022
  • 12/14/2022
  • 12/14/2022
  • 12/14/2022
  • 12/14/2022
  • 12/15/2022
  • 12/15/2022
  • 12/15/2022
  • Final Demo
  • Update Gitlab repo with final code.
  • Update test video.
  • Update the wiki page.
  • Completed
  • Completed
  • Completed
  • Completed


General Parts

Item # Part Seller Quantity Total Cost
1 64x64 RGB LED Matrix Sparkfun 1 $85.95
2 SJ-2 Boards SJSU 1 $50.00
4 PEMENOL Voice Playback Module Amazon 1 $10.19
5 Joysticks Amazon 2 $20.00
6 5v Power Supply Amazon 1 $15.19
7 Enclosed Speaker Set - 3W 4 Ohm Amazon 1 $12.48
8 Buttons Amazon 2 $8.95
9 Standoffs Amazon 1 $24.95
10 PCB [link Seller] 1 $40.00
11 Aluminum Enclosure Anchor Electronics 1 $45.12

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Pin Configuration

  • Pin# LED Matrix Pin SJ-2 PIN
    R1 High Red Led Data P0_6
    G1 High Green Led Data P0_7
    B1 High Blue Led Data P0_8
    R2 Low Red Led Data P0_26
    G2 Low Green Led Data P0_9
    B2 Low Blue Led Data P1_31
    A Mux row select A P1_20
    B Mux row select B P1_23
    C Mux row select C P1_28
    D Mux row select D P1_29
    E Mux row select E P2_4
    OE Output Enable P2_2
    LAT Data Latch P2_1
    CLK Clock Signal P2_0
    MP3 Module
    RX UART Receive P4_28
    TX UART Transmitter P4_29
    Buttons
    Either Pin Pause Button P2_5
    Either Pin Reset Button P2_6
    Joysticks
    X Player 1 P1_30
    X Player 2 P0_25

      Hardware Design

      Mp3 module.PNG Joysticks.PNG Enclosure.PNG Speakers.PNG Buttons.PNG


      Block Diagram

      The full system runs on 5 volts power supply. It powers the SJ2 board and Led Matrix. On The block diagram, the red lines represent the vcc and the black lines represent the ground. The blue lines represent the outputs from peripherals to SJ2 inputs. In the current code, the joysticks and buttons are powered from the SJ2 3v3 vcc pin, however, the PCB powers everything with 5 volts and provides a common ground. The code was left as is, because we did not have enough time to thoroughly test the PCB but the block diagram provides a view of how everything will be connected.

      The Joysticks work like potentiometers and supply an ADC signal to the SJ2 board. The joysticks were connected to ADC channels 2 and 4. The mp3 module used UART protocol and were connected to UART 3. The top of the board UART3 pins were used because of their output leds for debugging purposes. The speakers input and ground come from the mp3 module. Both buttons used gpio to connect to the SJ2 board and the other pin were connected to VCC.


      Circuit Block Diagram

      Hardware Interface

      In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

      Software Design

      Gameplay Flowchart

      Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.


      Led Matrix

      Hardware Implementation and Design

      All the pins were set up to be close to each other for better readability. The led matrix required 16 pins as specified above with two being ground. It required 5v with at least 2.1A current. The led matrix uses daisy chaing shift registers to set up the rows. The RGB1 pins set up the color of the top half leds and the RGB2 pins set up the color of the lower half leds. To control the lower half leds both RGB1 and RGB2 need to be set simultaneously. The matrix is 64x64, but works more like a 32x64 matrix. Pins A through E will select the row of the top half. For example, pixel 32x1, will light up when pixel 1x1 is on. This means that both RGB1 and RGB2 need to be set or reset simultaneously. For one pixel to be set, all other pixels need to be reset.


      • Led Matrix Front
      • Led Matrix Back

      Software Implementation and Design

      The led driver drawboard function below was set to draw anything that was set up in the led matrix buffer. By just modifying the buffer every time something changes, the display run smothers and faster. To set up a pixel requires to set up 2 whole lines. First, we tried to have every pixel be set whenever something changes. This lead to a lot of lag and flickering. Since the delay was being call every time one pixel was change. Instead the drawboard function display the buffer, while the refresh buffer function updates the function with any changes done in main.


      void led_driver__drawBoard(void) {
       int row, col;
       for (row = 0; row < 32; row++) {
         for (col = 0; col < 64; col++) {
           led_driver__colors_RGB1(led_matrix_refresh_array[row][col]);
           led_driver__colors_RGB2(led_matrix_refresh_array[row + 32][col]);
           led_driver__clock_toggle();
         }
         gpio__set(pins.LAT);
         gpio__set(pins.OE);
         led_driver__drawRow(row);
         gpio__reset(pins.LAT);
         gpio__reset(pins.OE);
       }
       led_driver__insync_row();
      }
      


      A background driver was created to introduced full objects to the game. Instead of updating every pixel at a time to create a ball or block, the background driver takes in different size arrays and adds them to the game. There are multiple functions for different game objects but they work the same. Using the fill_word function, all they require is the axis of the pins and the size of the arrays. This made it easier to code the movement of the objects by just following the first pixel of the object in the display. This made it possible to display full 64x64 displays at the same speed as changing one pixel. An important aspect that this function does as well, is to set the color. All the arrays could be set to one color, and the fill word function will changed them to the desired color. This was great for setting score and players objects to look different without adding more arrays to the driver.

      static void fill_word(uint8_t y, uint8_t x, uint8_t array_x, uint8_t array_y, uint8_t insert_word[array_y][array_x],
                           color_code color) {
       for (int row = 0; row < array_y; row++) {
         for (int col = 0; col < array_x; col++) {
           if (insert_word[row][col] == 1) {
             led_driver__setPixel(row + y, col + x, color);
           } else {
             led_driver__setPixel(row + y, col + x, insert_word[row][col]);
           }
         }
       }
      }
      


      Finally, the led task is runs all of this functions to set up the display. The psuedocode below demonstrate the events the task goes through.

      Pseudocode
      initiate the values of top and bottom edge
      start while loop
       if the game just started set up the starting screen and wait for a button to be press to start the game
         fill up the buffer with the original background
         set up the movement of the joysticks and added them to the buffer
         delay
         display what currently is in the buffer
      

      Implementation

      This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

      Testing & Technical Challenges

      Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

      Include sub-sections that list out a problem and solution, such as:

      <Bug/issue name>

      • Joystick input had a fixed paddle speed
      • Pause and Reset buttons service with ISR was difficult to debounce, moving button input detection to a Task would be more practical
      • If a ball hit the edges of the play area, they will fly out of bounce. Everything outside the main area was to put the ball back in the middle.
      • Strangely, we had a lot of flickering and thought it was a software bug but it was a hardware issue. Not all power adaptors work, even if they had the same voltage and current values.
      • The music would stop playing or ending earlier. The mp3 module was set to gpio first and then change to UART. The datasheet did not provide all necessary codes for the correct use of the commands. Research was done to find that an extra command was needed for all commands that require the mp3 module to jump between songs.
      • FPS issues with the ball looking like it was hitting one area but it was delay. The leds lights don't light up as always expected, therefore accommodations were done, where if the ball is around the area and its close enough it will count as a hit or goal.
      • The PCB rows were backwards. The pcb was created to hold the sj2 board, however, the row were backwards and needed to be remade. A second board was made and bought, but it got delayed and lost in Los Angeles, by the time it arrived, we did not want to mess with the system. We did not have enough time to integrate the pcb into the game but were able to logically tested using another sj2 board. Checking if the connections match.

      Conclusion

      Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

      Project Video

      SOCCER PONG Youtube Link

      Project Source Code

      SOURCE CODE GITLAB

      References

      Acknowledgement

      Any acknowledgement that you may wish to provide can be included here.

      References Used

      List any references used in project.

      Appendix

      You can list the references you used.