Difference between revisions of "F21: Flame Over"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Team Members & Responsibilities)
(Team Members & Responsibilities)
Line 8: Line 8:
 
*  Naveena Sura
 
*  Naveena Sura
 
** Game algorithm and implementation
 
** Game algorithm and implementation
** Developing game characters on LED matrix display
+
** Built game characters on LED matrix display
 
** Game Animation Screens
 
** Game Animation Screens
 
** Bug fixes and optimizations   
 
** Bug fixes and optimizations   
 
*  Suganya Nandakumar
 
*  Suganya Nandakumar
 
** GPIO Driver for LED matrix display
 
** GPIO Driver for LED matrix display
** Developing game characters on LED matrix display
+
** Built game characters on LED matrix display
 +
** PCB Schematic and Board Design
 +
** Soldering all components on PCB
 +
*  Vaidehi Deshpande
 +
** Joystick Interfacing - ADC driver
 +
** Speaker and MP3 Decoder interfacing
 +
** Zigbee interfacing with UART driver for transmission and reception
 +
** Built game characters on LED matrix display
  
 
== Schedule ==
 
== Schedule ==

Revision as of 00:18, 1 December 2021

Abstract

Flame Over is a single-player mode game where the player moves a fire fighter to destroy the fire flames that come shooting at the player using a water gun. The player is granted four lives at the start of the game at each level. The Player’s lives will decrease by one for every three flames that touch the fire fighter. The player transits to the next level when enough flames are destroyed at each level. The speed of the flames approaching the fire fighter varies between levels.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Naveena Sura
    • Game algorithm and implementation
    • Built game characters on LED matrix display
    • Game Animation Screens
    • Bug fixes and optimizations
  • Suganya Nandakumar
    • GPIO Driver for LED matrix display
    • Built game characters on LED matrix display
    • PCB Schematic and Board Design
    • Soldering all components on PCB
  • Vaidehi Deshpande
    • Joystick Interfacing - ADC driver
    • Speaker and MP3 Decoder interfacing
    • Zigbee interfacing with UART driver for transmission and reception
    • Built game characters on LED matrix display

Schedule

Week# Start Date End Date Task Status
1
  • 10/15/2021
  • 10/22/2021
  • Read previous projects, gather information.
  • Discussion on RGB LED matrix and Audio Decoder.
  • Gathering information regarding Bluetooth module and Joystick interface.
  • Finalize part list
  • Decide and distribute major roles among team members
  • Decide and re-phrase the game rules
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
2
  • 10/23/2021
  • 11/04/2021
  • Order necessary parts
  • Plan first draft of Wiki schedule
  • Review RGB LED Matrix datasheet.
  • Review Audio MP3 decoder datasheet.
  • Review the extra hardware needed for RGB LED matrix(Power Adapter)
  • Create Gitlab repository
  • Create a shared google drive for the team to share available resources
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
3
  • 11/05/2021
  • 11/09/2021
  • Read and familiarize with Bluetooth module(HC-05)
  • Start driver implementation for RGB LED matrix
  • Test the driver for single row
  • Implement functions for all the rows and columns in RGB LED matrix
  • Decide the graphics and character images for the game
  • Finalize the Wiki Schedule
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
4
  • 11/10/2021
  • 11/15/2021
  • Test the LED driver functioning and should display one of the character from game
  • Review the Audio MP3 functioning
  • Collect audio samples for different scenarios of the game
  • Develop serial MP3 audio encoder driver
  • Interface Serial MP3 encoder with SJ2 Board and check for its functioning
  • Design driver code for Joystick
  • Interface of joystick and SJtwo board and test its functionality
  • Synchronize audio MP3 with the joystick movements
  • Discuss the techniques to handle obstacles
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
5
  • 11/16/2021
  • 11/22/2021
  • Implementation of the game screens on the RGB LED matrix
  • Review game collision detection logic
  • Synchronize the Audio MP3 with the game graphics
  • Start PCB soldering and testing each part after fixing
  • RGB LED matrix should handle graphics for different game levels
  • Finalize sounds for different scenarios in the game
  • Test each module separately and review the code
  • Start designing the PCB circuit using a PCB design software.
  • In progress
  • In progress
  • Not started
  • Not started
  • Not started
  • Not started
  • Not started
  • Not started
6
  • 11/23/2021
  • 11/30/2021
  • Interface all the sensors, MP3 audio, Bluetooth module, joystick
  • Test the whole implementation after integrating all the modules
  • Debug and Test all the gaming functionalities for each module
  • Add the developed game logic
  • Test the game after adding the logic
  • Not started
  • Not started
  • Not started
  • Not started
  • Not started
7
  • 12/01/2021
  • 12/06/2021
  • Start working on Project report
  • Finalize the video game
  • Test the game logic
  • Check for the bug fixes
  • Not started
  • Not started
  • Not started
  • Not started
8
  • 12/07/2021
  • 12/13/2021
  • Update Wiki page
  • Work on project report
  • Update the GIT repo with the final code
  • Not started
  • Not started
  • Not started
9
  • 12/14/2021
  • 12/16/2021
  • Final demo
  • Update git repo with final code
  • Update the Wiki page with game demo link
  • Not started
  • Not started
  • Not started


Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

<Bug/issue name>

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.