F20: Son of a Gun

From Embedded Systems Learning Academy
Revision as of 00:08, 17 December 2020 by Proj user3 (talk | contribs)

Jump to: navigation, search

Ezgif.com-gif-maker.gif

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Son of a Gun

Abstract

Son Of A Gun is a shooting game inspired by the evergreen classics Duck Hunt and Virtua Cop 2. There will be enemy and friend objects on the LED matrix. The player will use a gun(having IR/color sensor or gyroscope) to aim and shoot the objects on the LED matrix. Killing the friend object will lead to 'Game Over'.


Block Diagram of Game Son Of a Gun

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Tejas Pidkalwar
  • Tirth Pandya
  • Nimit Patel

Schedule

Week# Date Task Actual Status
1

09/23 - 09/29

  • Review previous projects
  • Brainstorm on games and proposals
  • Frame the project proposals
  • 09/24
  • 09/25
  • 09/27
  • Completed
  • Completed
  • Completed
2

09/30 - 10/06

  • Components search and analysis
  • Discuss probable gameplays and challenges
  • 10/03
  • 10/04
  • Completed
  • Completed
3

10/07 - 10/13

  • Set up git repository
  • Set up JIRA for project management
  • 10/18
  • 10/10
  • Completed
  • Completed
4

10/14 - 10/20

  • Set up a wikipage
  • Prepare initial wiki schedule
  • Order finalized components
  • Study data-sheets of the components
  • Create a high-level block diagram of the project
  • 10/15
  • 10/19
  • 10/18
  • 10/20
  • 10/23
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
5-7

10/21 - 11/10

  • Distribute major roles among team members
  • Test the acquired parts and components
  • Develop basic drivers for LED matrix
  • Develop basic driver for Joystick
  • Develop basic driver for Accelerometer
  • Finalize gameplay objects - v1.0
  • 11/1
  • 11/5
  • 11/19
  • 11/8
  • 11/9
  • 11/20
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
8

11/11 - 11/17

  • Receive the new LED matrix (Sparkfun)
  • Finalize on wireless medium (Bluetooth vs Zigbee), Document the comparison
  • Document finalized wireless communication(Zigbee)
  • 11/17
  • 11/12
  • 11/15
  • Completed
  • Completed
  • Completed
9

11/18 - 11/24

  • Develop alphanumeric shapes and move shapes
  • Implement Zigbee driver (transmitter and receiver) and test same
  • Develop MP3 decoder driver and test same
  • Design algorithm to move object in foreground while maintaining background image
  • Move object on LED matrix using Joystick and accelerometer
  • Integrate zigbee interface for Joystick and gun controller communication
  • 11/20
  • 11/23
  • 11/25
  • 11/23
  • 11/22
  • 11/14
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
10

11/25 - 12/1

  • Design and order PCB
  • Create gameplay object for LED matrix
  • Create algorithm to detect cotroller’s pointer overlapping on object and take actions accordingly
  • Implement randomize function to move obstacle object randomly
  • Create background picture for gameplay
  • Design scoring mechanism for the gameplay
  • 12/02
  • 11/28
  • 11/29
  • 11/29
  • 12/01
  • 12/05

Completed

11

12/2- 12/8

  • Design different levels of game
  • Implement a scoring mechanism
  • Implement the code for different levels
  • Design aesthetics for console and controllers
  • Design power supply mechanism for each module of game
  • Integrate and test all the functionalities for gameplay[v3.0]
  • Design casing for the power supply and other modules
  • 12/05
  • 12/05
  • 12/07
  • 12/09
  • 12/01
  • 12/10

Completed

12

12/9 - 12/16

  • Build aesthetics for the game
  • Start final testing of the game and logging errors
  • Fix all the errors
  • Revise the document to cover all aspects of design and process
  • 12/11
  • 12/12
  • 12/13
  • 12/16

Completed

Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

General Parts

Item # Part Vendor Qty Cost
1 64x64 RGB LED Matrix Sparkfun 1 $87.15
2 SJTwo Boards Amazon/SJSU 3 $150.00
3 Zigbee Transreceiver Amazon 3 $88.14
4 Zigbee Adapter Amazon 1 $14.16
5 Two Axis Joystick Amazon 1 $4.25
6 5V DC Power Supply Amazon 1 $7.58
7 MP3 Player Amazon 1 $8.05
8 Nintendo Gun Amazon 1 $13.08
9 PCB to Order JLPCB 3 $27.03
10 Miscellaneous Excess Solution 1 $10.00

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Software Design

Our approach to the software design involved the use of eight different tasks for the various moving elements of our gameplay. Seven of these tasks are dedicated to updating the matrix buffer of size 32x64 which is just a two-dimensional array holding the R2, G2, B2 and R1, G1, B1 values. The ninth task has the highest priority which is used to refresh the display. This task get the latest values from the matrix buffer and is used to display a frame of the game on the LED Matrix display. The matrix buffer is constantly updated in real-time by the other seven tasks such as:

  1. Title Screen:
    • Used to initially display the title screen
    • Display the current high score
  2. Life Display:
    • Displays the number of life with friend function
    • When health runs out, suspends all other tasks and displays end screen (Game Over)
  3. Move Friend:
    • Move friend object depending on the inputs received from the 2-axis joystick over Zigbee
    • Collision detection between the Friend and Enemy object.
    • On overlap, reduce life by 1
  4. Detect Gunshot
    • Move cursor based on the accelerometer value received over Zigbee
    • When trigger is pressed, verify the object in Friend and Enemy Plane
    • If object detected, track which object is detected along with its nature i.e. Friend or Enemy
    • Take appropriate action. Reduce Life or kill enemy object and increase score.
    • If missed shot then do nothing.


The last task is the refresh display task mentioned above. This task includes a display function that controls the Latch, Clock, Output Enable pins of the LED Matrix display. This function reads the matrix buffer and extracts the R2, G2, B2, R1, G1, B1 values using shift operators.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementations.

1. The game involves the use of two controllers: one with a 2-axis joystick and the other with an onboard accelerometer.

2. The interfacing of 2 axis joystick is fairly easy. 2 ADCs and the job is done. For accelerometers too, getting values over I2C is a relatively easy task.

3. Challenge lies in using the Zigbee, with low latency. The serial was initially used, however, was later abandoned and SPI was used for lower latency.

4. Tracking the object onscreen is challenging as the game involves shooting objects. 3 virtual planes are maintained other than the RGB planes, which maintains the greyscale image of objects. Eg: Friend objects are drawn in the friend plane, enemy in the enemy plane, and life objects in the life plane. An intersection of these planes gives the overlap if it exists. Once the intersection is available, the nearest position of the enemy/plane is extracted from the structure and requisite action is taken henceforth.

5. Objects move on the screen on a pseudo-random pattern. The variability of the movement is dependent upon the gave level.

6. Once life becomes over, the game reaches an end.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

1. Zigbee Drivers: We initially used UART communication(Max possible speed 115200bps)to interface the ZigBee controller to the master controller. With the overhead of size of the frame (21-22 bytes) to send just 2 bytes of data, we observed significantly delayed response at the receiver end. So, we had to change the interface to SPI communication (with a speed of 3 mbps), which being duplex with high speed helped to remove delayed response at the receiver end.

2. Sending button press response over Zigbee: We had implemented GPIO interrupt on GUN controller, which periodically reads accelerometer values and send calibrated values console, and semaphore waiting task to send button press response. The button press was causing occur interrupt to give a semaphore to the button press sender task and was disturbing the RTOS task of calibrating accelerometer values while sending to the game console. To remove this disturbance, we removed the semaphore waiting task on GPIO interrupt and instead used regular accelerometer parameter sender task to send button press signal.

<Bug/issue name>

1. All the objects onscreen are tracked by using a structure file, which has co-ordinates of all the object, their status, shape, and other relevant information. When we call the draw function, the LED worked flawlessly for some time, after which the board would restart. This was because the structure would access out of bound value, which resulted in the board to restart.

2. The object collision algorithm worked only if the object resided on column 32 and above on a 64 x 64 LED panel. On careful observation, it was noticed that the back end function which implemented the collision detection, used bit shifting of uint64 variables. The bits 32 through 63 all had value 0. The bit-shifting part was broken down into two 32 bit shift variables and then these two variables were &-ed together. Though, the comptroller processes all unit64 variable manipulation, the bit shifting one was a surprise and required intricate debugging to get the root cause of the API responding weirdly in an otherwise logical implementation of high-level logic.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project involved using different hardware and then integrating it with the controller to create the game. Creating API for various tasks involved in game flow, helps in modularization of design. This proves especially useful, during debugging, where the problematic API can be easily isolated and this reduces the scope of code review required for each debugging.

Always test the hardware before it is incorporated into your project. however, there might be a case wherein, the API is not available to test the hardware. This become especially tricky, wherein, it becomes difficult to pinpoint issue on either hardware issue or bad code. A fault LED matrix resulted our team in a fortnight worth of time, initially trying to debug the issue, and then waiting for the new part to be shipped to us.

When using wireless data communication modules, latency and packet overhead are important consideration to consider on choosing the best wireless communicatoin module.

Objects which have multiple color, when overlap each other, results in color mixing on LED panel. This needs special attention.

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.