F20: Flappy

From Embedded Systems Learning Academy
Revision as of 03:21, 18 December 2020 by Proj user2 (talk | contribs) (Hardware Design)

Jump to: navigation, search

FLAPPY

Abstract

FLAPPY is one of the most anticipated gaming machines of the year 2020. Adopted the timeless design of the Gameboy Advance, it can play one and only one game(albeit the best game of all time in our opinion): FLAPPY BIRD. The player is advised to move the main character wisely (up and down) to NOT hit the beautiful green pipe. With simple gameplay and catchy music, it guarantees thousands of seconds of interesting game for the entire family.

Objectives & Introduction

The main objective of our project was to re-create the iconic Flappy Bird mobile game into a physical gaming device. Our team tried to simplify the device in accordance with the original game spirit: its simplicity. Using the SJ2 board, our team started by researching for suitable components and interfaced them together to replicate Flappy Bird

Objectives:

  • Smooth button usage and it must handle the push differently based on the scenes
  • Write a simple driver to communicate with the LED
  • Write a separate driver for game graphic
  • Design a state machine to handle different game tasks such as the start screen, gameplay, and ending screen
  • Implement the game logic for movement of the bird, collision detection, randomized obstacle generation, and a score keeping system

Team Members & Responsibilities

  • Huy Nguyen
    • Git Admin
    • LED Matrix Driver
    • Game Graphic Driver
    • Overall Software Stack
  • Michael Wang
    • LED Matrix Driver
    • Obstacle Generations
    • Overall Software Stack
  • Brian Tran
    • Soundboard Driver and Hardware Integration
    • Overall Hardware Stack
    • Case built and design
    • Code debug
  • Danny Nuch
    • PCB design and Hardware Integration
    • Overall Hardware Stack
    • Code debug

Schedule

Week Date Task Status
1 10/13
  • Flappy project proposal approved by the instructor.
  • Completed
2 10/20
  • Order LED Matrix
  • Create GitLab repository
  • Completed
  • Completed
3 10/27
  • Received LED Matrix
  • Order Sound board
  • Overall Game-machine design
  • Completed
  • Completed
  • Completed
4 11/3
  • Order Button
  • Game-machine Design
  • Game Logic - Basic High-level Game design
  • Completed
  • Completed
  • Completed
5 11/10
  • Screen Driver - Basic Display
  • Game Logic - Bird location
  • Game Logic - Poles location
  • Completed
  • Completed
  • Completed
6 11/17
  • Soundboards interface
  • Button interface
  • Packaging design
  • Completed
  • Completed
  • Completed
7 11/24
  • Integrate basic parts
  • Order PCB board
  • Game case cut-out
  • Completed
  • Completed
  • Completed
8 12/1
  • Final Testing
  • Final Report
  • Final Wiki Page Update
  • Completed
  • Completed
  • Completed
10 12/16
  • PCB Tested
  • Final Packaging
  • Complete Wiki Report
  • Final Project Demo
  • Completed
  • Completed
  • Completed
  • Completed

Parts List & Cost

Part Name Quantity Cost Per Unit
SJ2 Board 1 $50
32x64 RGB LED Matrix 1 $22
5V Power Supply 1 $13.19
Adafruit Soundboard 1 $29.95
Adafruit Amplifier 1 $9.95
Speaker 2 $1.95
Red Button 1 $19.95
Wood 6 $9.95
Satin White Spray Paint 6 $5.98

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.


Schematic
GPIO ID number SJ2 GPIO Connection
0 P0.6 Audio 0
1 P0.7 Audio music connection 1
2 P0.8 Audio music connection 2
3 P0.9 Audio music connection 3
4 P0.26 Audio music connection 4
5 P0.25 LED matrix Red 1
6 P1.31 LED matrix Blue 1
7 P1.30 LED matrix Red 2
8 P1.20 LED matrix Blue 2
9 P1.23 LED matrix A selector
10 P1.28 LED matrix C selector
11 P1.29 LED matrix clock
12 P2.0 LED matrix output enable
13 P2.1 LED matrix Green 1
14 P2.2 LED matrix Green 2
15 P2.4 LED matrix B selector
16 P2.5 LED matrix D selector
17 P2.5 LED matrix Latch


Footprint
Bare PCB
Assembled PCB

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

For our project we ran into many road block that were amplified due to the current state of affairs. Our advice would be to get the hardware layout done ASAP so PCB design and ordering can began. This will give some leeway for shipping delays, bad products, and debugging time.

Testing the project itself was not hard, but time was definitely an invaluable resource. Testing the parts individually (cables, PCB, LED matrix, etc) was simple but time consuming. To test our parts we utilized a multi-meter to check continuity on the PCB connections and our soldering work. A mistake we made was not testing our ribbon cables, which damaged one of our SJ2s when we switched out our GPIO cables.

Major Challenges:

1. Estimated Delivery of Parts

We faced some unexpected issues when gathering all the components for our project. Several parts came in late like our LED matrix and sometimes were dead-on-arrival. This issue was the worst regarding our PCB parts. Components such as the 2x20 headers and ribbon cable were delayed and did not arrive in a reasonable amount of time. Looking back, ordering the parts online was not ideal. Going to a parts store such as Anchor electronics would have saved us many of the headaches waiting for common parts to arrive.

2. Shoddy Quality Parts

Parts we ordered from amazon and parts from our local electronics shop proved to be faulty. Two LED matrixes did not properly light-up and it was not until our third matrix were we able to get a working one. The ribbon cables we used in our project were also shorted, which resulted in us shorting one of our SJ2s. To resolve this issue we should have budgeted extra time to individually check cable connections.

3. Music/Sound Effect Playback

One of the issues we experienced was our speakers only outputting noise during final project testing. This issue did not show up when testing parts individually using the SJ2 as a 3.3V power source. The issue was however determined to be the SJ2. Although it correctly flashed code and ran the LED matrix or DAC+AMP individually without issue, when combined the DAC was unable to output music. Using a different groupmate's SJ2 solved the issue completely. This issue was most likely tied to us using a faulty ribbon cable that only partially damaged our SJ2 board.

4. RGB LED Matrix Irregular Brightness

This is an issue we could not resolve in time before project submission. When our project was connection via GPIO pins it looked perfect. When connected through our PCB however, several rows of LEDs would shine brighter than the rest. Seeing this to be the case we determined the issue to most likely be noise at the PCB level.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.