Difference between revisions of "F20: Bubble Shooter"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Binary Semaphore)
(Communication between Main and sister SJ2 board)
Line 419: Line 419:
 
We have low priority created check_which_song_recieved_from_main_sj2_board_semaphore_give which will act as a producer task which will select which mp3 background music or sound fx need to be played and it will give the semaphore of the selected music file to the high priority consumer task called play_song_task which will suspend all other song handlers and play the selected song.
 
We have low priority created check_which_song_recieved_from_main_sj2_board_semaphore_give which will act as a producer task which will select which mp3 background music or sound fx need to be played and it will give the semaphore of the selected music file to the high priority consumer task called play_song_task which will suspend all other song handlers and play the selected song.
  
==Communication between Main and sister SJ2 board==
+
===Communication between Main and sister SJ2 board===
 
We have initialized 3 GPIO pins on the main(P0.15, P0.18, P0.1) and sister board(P2.0, P2.2,  P2.5) and we have a total of 8 songs list, to which the respective GPIO pins will be high or low based on the song selection. The GPIO pins on the mainboard will be the output pins and the GPIO pins on the sister board will be the input pins. Henceforth, the sister board will receive input from the mainboard for the song selection and a binary semaphore will play the song.
 
We have initialized 3 GPIO pins on the main(P0.15, P0.18, P0.1) and sister board(P2.0, P2.2,  P2.5) and we have a total of 8 songs list, to which the respective GPIO pins will be high or low based on the song selection. The GPIO pins on the mainboard will be the output pins and the GPIO pins on the sister board will be the input pins. Henceforth, the sister board will receive input from the mainboard for the song selection and a binary semaphore will play the song.
  

Revision as of 04:31, 18 December 2020

Abstract

Bubble shooter is an arcade game that has bubbles or balls present on the screen. The bubbles are of different colors and the goal is to clear them by forming a group of bubbles (3 or more) of the same color. Points are earned upon clearing the bubbles and increases with the number of bubbles cleared in a single shot. The player wins upon clearing the screen and loses when the bubbles touch the bottom of the screen.


Block Diagram of Bubble Shooter

Objectives & Introduction

The objective of this project is to develop a simple, single-player 2D game using LPC 4078 microcontroller on an LED matrix display. It focuses on integrating the micro-controller peripheral drivers, led drivers, MP3 player, button and joystick controller interface and the application software in FreeRTOS. The button controller interface consists of the joystick for moving the shooter left and right. The button is used to fire the ball.

Team Members

Technical Responsibilities

  • Game Logic Development
Hisaam Hashim, Amiraj Nigam, Anirudh Ashrit, Akshat Bhutiani
  • PCB Design
Anirudh Ashrit
  • LED Display Driver
Hisaam Hashim
  • Graphics Driver
Hisaam Hashim, Akshat Bhutiani
  • Mp3 Decoder Driver
Amiraj Nigam, Anirudh Ashrit
  • Joystick Integration
Akshat Bhutiani
  • Hardware Integration
Amiraj Nigam, Hisaam Hashim

Administrative Responsibilities

  • Team Leader
Hisaam Hashim
  • Git Repository Managers
Akshat Bhutiani & Anirudh Ashrit
  • Code Reviewer
Hisaam Hashim
  • Wiki Report Managers
Amiraj Nigam & Anirudh Ashrit
  • Bill of Materials Manager
Akshat Bhutiani


Schedule

Week# Start Date End Date Task Status
1
  • 10/12/2020
  • 10/16/2020
  • 10/18/2020
  • 10/18/2020
  • Literature Survey of Previous year Projects
  • Submission of Project Proposal
  • Completed
  • Completed
2
  • 10/18/2020
  • 10/20/2020
  • Gitlab Repository Created
  • Wiki Schedule page Created
  • Completed
  • Completed
3
  • 10/20/2020
  • 11/01/2020
  • Read and familiarize with LED Matrix Datasheet.
  • Finalize the Components and place the order
  • Completed
  • Completed
4
  • 11/01/2020
  • 11/10/2020
  • Understand the ball tracing logic
  • Understand the logic for ball queue
  • Completed
  • Completed
5
  • 11/09/2020
  • 11/09/2020
  • 11/09/2020
  • 11/09/2020
  • 11/10/2020
  • 11/15/2020
  • 11/15/2020
  • 11/15/2020
  • Finalize wiki schedule
  • LED Matrix Driver Development
  • MP3 Decoder Driver Development
  • Joystick driver development and interfacing
  • Game logic development
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
6
  • 11/16/2020
  • 11/22/2020
  • Designing of levels in the game
  • Testing trigger motions
  • Testing and debugging the game logic
  • PCB Designing
  • Completed
  • Completed
  • Completed
  • Completed
7
  • 11/23/2020
  • 11/29/2020
  • Integrate game logic code with LED matrix
  • Integrate game sounds with game logic
  • Completed
  • Completed
8
  • 11/30/2020
  • 12/06/2020
  • Integrate subsystem
  • Finalizing the video game
  • Update the wiki page.
  • Completed
  • Completed
  • Completed
9
  • 12/07/2020
  • 12/13/2020
  • Address bugs during testing of an integrated system
  • Test pause/play functionality
  • Completed
  • Completed
10
  • 12/16/2020
  • 12/14/2020
  • 12/14/2020
  • 12/14/2020
  • 12/16/2020
  • 12/16/2020
  • 12/16/2020
  • 12/16/2020
  • Final Demo
  • Update Gitlab repo with final code.
  • Update test video.
  • Update the wiki page.
  • Completed
  • Completed
  • In progress
  • in progress


Bill Of Materials

Item# Part Description Part Model & Vendor Quantity Cost
1 Microcontroller Boards SJ2 Boards (Purchased from Preet Kang) 1 $50.00
2 LED Matrix Display RGB LED Matrix Panel - 32X64 1 $55.00
3 Audio decoder Breakout Board MP3 PLayer Shield 1 $26.95
4 Analog 2-axis Thumb Joystick Analog 2-axis Joystick 1 $10.36
5 Power Supply 5V/3A Power Supply 1 $8.99


PCB Design

The board is designed to connect modules in the game directly. Autodesk's Eagle software is used to design the Schematics and Board layout. The board has 2 layers(Top and Bottom). JLCPCB is the manufacturer of the PCB board. Connections from SJ2 Board are provided to the PCB, which are internally connected to MP3 Decoder, Joystick, Buttons, and LED Matrix pins. These are connected directly to the peripherals using a harness. Additional power and ground pins are also provided on the board.

Schematic Design of PCB
Design Overview of the PCB
PCB Board Layout
PCB Front Face
PCB Back Face

Analog Joystick

Hardware Design

An ADA512 2-axis Analog Joystick and Button is used for controlling the movement of the launcher and shooting the ball. The data from the joystick is read using the ADC pins of the SJTwo board. The button switch is detected using a digital pin on the board.

Breakout board layout
Soldered joystick


X values & Mapping Y values & Mapping
2297 (center) 2295 (center)
43 (left) 45 (up)
4095 (right) 4090 (down)

MP3 Decoder

The MP3 shield communicates with the sister SJ2 board through SPI communication protocol with the SPI0 pins of the SJ2 board as follows:

Label Name Function Pin Connection Description
1 MP3-DREQ Decoder Data Request Pin 0.1 MP3 decoder signals to master to ready to receive next 32 bytes of data
2 MP3-CS VS1053B Chip Select Pin 0.22 Chip select pin for MP3 decoder to be activated while sending control signals
3 MP3-DCS VS1053B Data CS Pin 0.0 Data Chip Select Pin for the MP3 decoder to be activated while sending audio data signals.
4 MP3-RST VS1053 Reset Pin 0.10 Reset pin for the MP3 Decoder
5 MOSI Master Output Slave Input Pin 0.18 Master send data to Slave over SPI bus
6 MISO SPI Bus (Master Input Slave Output) Pin 0.17 Slave send data to master over SPI bus
7 SCK SPI Clock Pin 0.15 Clock generated by the master over SPI bus
8 +5V +5V PCB Vout 5 Volt Input from PVB
9 GND GND GND GND connected to PCB

Hardware Design

MP3 Layout

Software Design

MP3 Layout

Implementation

To initialize the MP3 decoder, we have first initialized the SSP0 and the SJ2 pins connected to the MP3 decoder with proper input/output function configurations. We then configure the decoder registers by selecting the MP3 chip select pin and writing data over SPI. These include the mode (default), clock frequency multiplier (3x), volume (max), and audio (44100 Hz stereo data). We then flush the mp3 decoder, sending it 2500 0 bytes. Reading the MP3 File from an SD Card[edit] We create a low priority task (read_song_from_sd_card) to read from the SD Card. Read_song_from_sd_card task first opens the mp3 file on the sd card and determines the size. Afterward, it reads in 512 bytes at a time to a global array (whenever the music playing task has finished playing the previous 16 bytes) and sets a global variable (sdready) to true. It will continue to do this until the file has been completely read, and then start over from the beginning.

Feeding the Decoder and Playing Music

We create another low priority task (play_song_task) to play music. If the MP3 DREQ pin is currently set, it delays. Otherwise, whenever sdready is true, it selects the Data chip select line and sends 32 bytes over the SPI bus. It then deselects data chip select and redoes this 16 times (sending the 512 bytes that have been read). After it has sent all 512 bytes, it sets sdready to false so the read_song_from_sd_card task knows to read in the next 512 bytes. It continues to repeat this process for as long as mp3sdcard reads in data to the array.

Binary Semaphore

We have low priority created check_which_song_recieved_from_main_sj2_board_semaphore_give which will act as a producer task which will select which mp3 background music or sound fx need to be played and it will give the semaphore of the selected music file to the high priority consumer task called play_song_task which will suspend all other song handlers and play the selected song.

Communication between Main and sister SJ2 board

We have initialized 3 GPIO pins on the main(P0.15, P0.18, P0.1) and sister board(P2.0, P2.2, P2.5) and we have a total of 8 songs list, to which the respective GPIO pins will be high or low based on the song selection. The GPIO pins on the mainboard will be the output pins and the GPIO pins on the sister board will be the input pins. Henceforth, the sister board will receive input from the mainboard for the song selection and a binary semaphore will play the song.

LED Matrix Interfacing

Game

We use a 32x64 LED matrix consisting of 2048 LEDs arranged in 32 rows and 64 columns each, with each led having separate Red, Green, and Blue LED chips assembled together as a single unit. This 32x64 LED matrix is comprised of 2 of 16x32 led matrices placed vertically to each other. There are different drivers for controlling the corresponding rows and columns each. In order to illuminate a particular led, one needs to access and control the corresponding row and column (just like the coordinate-axis). To change the color of a particular led, each led must be controlled using the driver for that row and column. A layout of pins and connections can be seen below:

LED Matrix and SJ2 Connections
LED Matrix Ribbon Connector
LED Matrix Pins Connection to SJTwo board
R0 Pin 0.1
G0 Pin 1.1
B0 Pin 1.4
R1 Pin 4.28
B1 Pin 0.6
G1 Pin 0.8
A Pin 1.23
B Pin 1.29
C Pin 2.1
D Pin 2.4
CLK Pin 0.26
STB Pin 1.31
OE Pin 1.20
GND GND

The matrix pixels are controlled by 6 drivers, 3 for the top half of the matrix(R0, G0, B0) and 3 for the bottom half(R1, G1, B1). The three drivers for R, G, and B share an SCLK, Latch, and OE signal. The top half pixels of the matrix controlled by R0, G0, B0 are rows 0-15, and the second half controlled by R1, G1, B1 are rows 16-31. The display is multiplexed at a duty cycle of 1/16, this means that one row in the top half and one row in the bottom half will be illuminated at a time. In order to display an image, the row and column LEDs for that image must be turned “ON”, therefore, the entire panel must be scanned at a rate(speed) at which it appears that the image is being displayed without flickering. To display different colors and different brightness levels, the LED chips of the corresponding row and column must be adjusted by varying the amount and time that each LED chip is turned on during each cycle.

LED Matrix Specifications:

5V regulated power input, 4A max (all LEDs on)

2.1 mm x 2.1 mm LED size

1/16 Scan Rate

LED Matrix Interfacing
Start Screen of the game

Software Design & Implementation

Analog Joystick & Button Device Driver

The ADA512 joystick's device driver works on the principle that the ADC pins will be able to read the x and y values. The joystick consists of 2 inbuilt potentiometers that provide output (x and y directions) according to the way the joystick is moved.

Steps to read joystick data:

1. Turn on the ADC Peripheral

2. Make the ADC pin operational by setting the appropriate pin functionality using the IOCON registers.

3. Set the appropriate ADC clock (12.4 MHz is the maximum clock supported by the ADC).

4. Set the ADC pin functionality as input.

5. Select the number of channels to read.

6. Select burst mode for immediate conversion.

void adc__initialize_alien(void)
{
Turn ON ADC peripheral;
make ADC operational;
set ADC clock;
Set Pin functions;
select ADC channels;
start burst mode;
} 
  
data get_data(adc_channel_e x_port, adc_channel_e y_port, gpio_s button_press) {
data s;
s.x_data = adc__get_adc_value(x_port);
s.y_data = adc__get_adc_value(y_port);
if (gpio__get(button_press)) {
s.switch_pressed = true;
} else {
s.switch_pressed = false;
}
return s;
} 


LED Matrix Device

Game

The game has 3 levels apart from the main menu, Credit scene, and Game-over screen. Just like any other arcade game, the game only starts when you earn credits and it is earned by pressing a button. The game begins with the press of another button. A block of bubbles starts falling down with every turn and finishes if it touches the danger line below. Bubbles, when hit with similar color, get destroyed and the game advances to the next level when all the bubbles on the screen are cleared. There's also a hack to traverse through levels, just press the credit score button and it will do the job for you. But hey, that's a cheat code, so you're a cheater!

RGB Color Combo

Red Blue Green Color
0 0 0 White
0 0 1 Blue
0 1 0 Green
0 1 1 Cyan
1 0 0 Red
1 0 1 Magenta
1 1 0 Yellow
1 1 1 Black

Implementation

1. Initialize the LED matrix by configuring necessary pin directions.

2. Disable Output Enable (OE) GPIO before feeding matrix data.

3. Select the required row by setting bits on A, B, C, D GPIO pins.

4. Loop through the pixels (columns) in the selected row and set the pixel color on R, G, B GPIO pins.

5. Set zero on R, G, B GPIO pins to mask that particular pixel.

6. Set and Reset the clock for pushing the R, G, B bits for each column.

7. Issue latch to mark the row's completion and reset latch before going to the next row.

8. Follow steps 2 to 7 for other rows.

for (uint8_t row = 0; row < (MAX_ROW); row++) {
     disableOE();
     set_row(row);
     for (uint8_t col = 0; col < MAX_COL; col++) {
       LPC_GPIO0->PIN |= (1 << CLK);
       set_color_bottom(game_matrix[row + (MAX_ROW / 2)][col]);
       set_color_top(game_matrix[row][col]);
       LPC_GPIO0->PIN &= ~(1 << CLK);
     }
     LPC_GPIO0->PIN |= (1 << LAT);
     enableOE();
     LPC_GPIO0->PIN &= ~(1 << LAT);
     enableOE();
     vTaskDelay(1);
}

Graphics Driver

We have managed to program the graphics in a relatively simple way by looking at the ADAFruit gfx library that comes ready to use with Arduino. Our graphics driver can implement graphics and animations such as letters, numbers, ball appearance and ball disappearance etc.

void place_launcher(LedMatrixDisplay led_display, pixel_color rgb, gfx__cursor start_cursor, bool 
choose_back_frame) {
 
game_event object_property = BACKGROUND_OBJECT;
rgb.event = object_property;
draw_line(led_display, rgb, ROTATION_90, start_cursor, 9, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 0, start_cursor.y + 1, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 0, start_cursor.y + 2, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 1, start_cursor.y + 3, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 2, start_cursor.y + 4, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 3, start_cursor.y + 5, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 4, start_cursor.y + 5, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 5, start_cursor.y + 5, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 6, start_cursor.y + 4, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 7, start_cursor.y + 3, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 8, start_cursor.y + 1, choose_back_frame);
modify_pixel(led_display, rgb, start_cursor.x + 8, start_cursor.y + 2, choose_back_frame);
}
Game Level 1
Game Over Screen
Graphics display

Testing & Technical Challenges

Describe the challenges of your project. What advice would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to the testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

<Bug/issue name>

Discuss the issue and resolution.

Conclusion

This project was a fun and strenuous application of our engineering and project management skills.

After completing the driver labs during CMPE 244, we felt confident that we could develop a driver, for the Adafruit LED matrix, without using any third party libraries. We researched the hardware operations of the LED matrix and how to drive the RGB LED's. Once we could control LED's one at a time, the project evolved from an engineering problem into more of a creative exercise.

Overall I think the biggest lessons that we learned is project management based. We spent a lot of time choosing between various game designs and it forced us to start our final iteration later than we would have liked. However, we bonded together and worked hard and managed to get the game working.


Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

We would like to sincerely thank Professor Preetpal Kang for his allround guidance, feedback and support. His classroom lectures were significant in imparting knowledge on embedded systems. Further, we would like to thank the ISA team for their advice.

References Used