Difference between revisions of "F15: Undergrads++"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Schedule)
(Schedule)
Line 71: Line 71:
 
|-
 
|-
 
|1
 
|1
|10/7/2015
+
|10/07/2015
 
|10/14/2015
 
|10/14/2015
 
|Researching the Sensors
 
|Researching the Sensors
Line 88: Line 88:
 
|3
 
|3
 
|10/30/2015
 
|10/30/2015
|11/7/2015
+
|11/07/2015
 
|Transfer the sensor data via CAN bus to master
 
|Transfer the sensor data via CAN bus to master
 
|......
 
|......
Line 95: Line 95:
 
|-
 
|-
 
|4
 
|4
|11/7/2015
+
|11/07/2015
 
|11/14/2015
 
|11/14/2015
 
|Normalizing sensor data values
 
|Normalizing sensor data values

Revision as of 06:34, 6 October 2015

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Project Title

Abstract

This section should be a couple lines to describe what your project does.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Arlen Eskandari
  • Calvin Lai
  • Hassan Naveed
  • Hector Prado-Guerrero
  • Jashan Singh
  • Jonathon Hongpananon
  • Marvin Flores
  • Onyema Ude
  • Phil Tran
  • Shangming Wong

Schedule

Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.

Week# Date Task Actual
1 10/8 Task list Completed? Problems Encountered?


Sensor Controller Team Schedule

Sl. No Start Date End Date Task Status Actual Completion Date
1 10/07/2015 10/14/2015 Researching the Sensors Complete/incomplete xx/xx/2015
2 10/14/2015 10/30/2015 Connecting the Sensors to the SJOne board and capturing data ... xx/xx/2015
3 10/30/2015 11/07/2015 Transfer the sensor data via CAN bus to master ...... xx/xx/2015
4 11/07/2015 11/14/2015 Normalizing sensor data values .... xx/xx/2015
5 11/14/2015 11/21/2015 Optimizing the code ........ xx/xx/2015

Android/Bluetooth Team Schedule

Sl. No Start Date End Date Task Status Actual Completion Date
1 10/6/2015 10/15/2015 Familiarize ourselves with the Android SDK and Java and Google Maps API Complete/incomplete
2 10/6/2015 10/15/2015 Have a working menu.
3 10/10/2015 10/18/2015 Have the phone communicating with the SJOne board using XBee/Zigbee (UART).
4 10/16/2015 11/10/2015 Relay CAN Bus messages/tasks.
5 10/18/2015 11/15/2015 Be able to input GPS coordinates and have a working map available.
6 10/25/2015 11/20/2015 Start and stop commands should be up and running. Test with GPS.
7 10/20/2015 11/27/2015 Working sensor readings including speed and collisions.
8 11/15/2015 12/01/2015 Extensive testing of the application and its bridge

GPS Controller Team Schedule

Sl. No Start Date End Date Task Status Actual Completion Date
1 09/29/2015 10/06/2015 Order Adafruit Compass and GPS and solder header pins Complete 10/05/2015
2 10/06/2015 10/13/2015 Connect and get minimum UART connection working and interface compass via I2C Incomplete 10/xx/2015
3 10/13/2015 10/20/2015 Design GPS task to parse data and get compass heading info Incomplete 10/xx/2015
4 10/20/2015 10/27/2015 Integrate GPS, SJSU board, and CAN rx/tx task Incomplete 10/xx/2015
5 10/27/2015 11/3/2015 Test Communication with Master Controller and determine final heading using GPS and compass Incomplete 11/xx/2015
6 11/03/2015 11/10/2015 Test and debug (if there are any errors/corner cases) Incomplete 11/xx/2015
7 11/10/2015 11/17/2015 Optimize the code and testing for stability and report. Incomplete 11/xx/2015

Parts List & Cost

Item# Part Desciption Vendor Part Number Qty Cost
1 RC Car Amazon.com Traxxas Slash 2WD VXL 58076 1 $339.94
2 +++++ ++++ +++ ++
++
3 CAN Transceiver Texas Instrument SN65HVD232D 5 Sample
4 Assembly Components Amazon.com, Anchor & HSC PCBs, Mechnical & Electical Components NA $++++
5 ++++++++++ ++++++++ ++++++++++++++ 1 $+++
6 Sonar sensor Maxbotix 3 $
7 Sonar sensor Given by Preet LV-MaxSonar-EZ1 MB1010 3 Free
8 Adafruit Tripleaxis Accelerometer+Magnetometer(Compass) Board - LSM303 Adafruit LSM303 1 $20.97
9 LCD Display 1 $
10 1 $

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.