F15: Laser Security System
Contents
- 1 Project Title
- 2 Abstract
- 3 Objectives & Introduction
- 4 Team Members & Responsibilities
- 5 Schedule
- 6 Parts List & Cost
- 7 Design & Implementation
- 8 Hardware Design
- 9 Hardware Interface
- 10 Software Design
- 11 Implementation
- 12 Testing & Technical Challenges
- 13 My Issue #1
- 14 Conclusion
- 15 Project Video
- 16 Project Source Code
- 17 References
- 18 Acknowledgement
- 19 References Used
- 20 Appendix
Project Title
Laser Security System
Abstract
Objectives & Introduction
Team Members & Responsibilities
Schedule
| Week# | Date | Planned Task | Actual |
|---|---|---|---|
| 1 | 10/12-10/18 |
• Project Approval • Project Research • Purchase all required parts |
• Project Research |
| 2 | 10/19-10/25 |
• Build Schematics • Order all parts • Test individual components |
• Testing components separately was successful • Waiting on a few components • Diagrams for hardware design were complete |
| 3 | 10/26-11/1 |
• Begin hardware design interfacing a laser, photo-resistor and SJ One Board • Test the hardware design |
• Started hardware design • Started project report |
| 4 | 11/2-11/8 |
• Trouble shoot hardware design with • Test the hardware as a whole |
• Realized we needed a transceiver • Waiting on the transceiver before we can continue with the hardware design completion |
| 5 | 11/9-11/15 |
• Research about Bluetooth communication • Build Bluetooth circuit |
• Received the transceiver • Completed the hardware design • Updated all hardware diagrams • Tested and Debugged the whole system |
| 6 | 11/16-11/22 |
• Interface Bluetooth communication with SJ One Board • Test the complete hardware interface |
• • |
| 7 | 11/23-11/29 |
• Test Bluetooth communication with SJ One Board |
• Started software programming for CAN bus and UART interfaces |
| 8 | 11/30-12/6 |
• Complete the software interfaces for laser, SJ One Board and Bluetooth communication • Implement text message feature with Bluetooth communication |
• Completed the software interfaces for CAN Bus and UART protocol • Started Testing and Debugging |
| 9 | 12/7-12/13 |
• Finish Debugging • Start writing report • Test system design |
• Completed the debugging phase • Started interfacing the hardware with the software • Tested the device on an actual vehicle • Continued the project report |
| 10 | 12/14-12/17 |
• Complete system testing • Complete the project report • Demo the project |
• Completed system testing • Created video for presentation • Completed the project report • Presented the project on Thursday, December 17, 2015 |
