Difference between revisions of "F15: Laser Security System"

From Embedded Systems Learning Academy
Jump to: navigation, search
(Team Members & Responsibilities)
(Parts List & Cost)
Line 168: Line 168:
  
 
== '''Parts List & Cost''' ==
 
== '''Parts List & Cost''' ==
 +
 +
{| class="wikitable"
 +
|-
 +
! scope="col"| Quantity
 +
! scope="col"|  Item
 +
! scope="col"| Cost
 +
 +
|-
 +
! scope="row"| 2
 +
|SJ One Board
 +
| $80.00
 +
|-
 +
|-
 +
! scope="row"| 1
 +
|Quad-band Cellular Duck Antenna SMA
 +
| $7.95
 +
|-
 +
 +
 +
|-
 +
! scope="row"| 1
 +
|RN42-XV Bluetooth Module - PCB Antenna
 +
| $24.95
 +
|-
 +
 +
 +
|-
 +
! scope="row"| 1
 +
|Mini Photocell
 +
| $1.50
 +
|-
 +
 +
 +
|-
 +
! scope="row"| 1
 +
|SparkFun Cellular Shield - MG2639
 +
| $69.95
 +
|-
 +
 +
 +
|-
 +
! scope="row"| 1
 +
|Arduino Uno R3
 +
| $24.95
 +
|-
 +
 +
 +
|-
 +
! scope="row"| 1
 +
|LED
 +
| $0.10
 +
|-
 +
 +
 +
|-
 +
! scope="row"| 1
 +
|Resistors 8.2K, 2.7K and 1K ohms
 +
| $0.20
 +
|-
  
 
== '''Design & Implementation''' ==
 
== '''Design & Implementation''' ==

Revision as of 22:26, 16 December 2015

Project Title

Laser Security System

Abstract

The Laser Security System allows to maintain security in a room by shining a laser across a door's entrance and alerting via bluetooth communication by sending a text message to a smart phone that security has been compromised.

Objectives & Introduction

Team Members & Responsibilities

Emmanuel Gonzalez: Software Implementation and Report Writer

Irlanda Altamirano: Hardware Implementation and Report Writer

Schedule

Week# Date Planned Task Actual
1 10/12-10/18

• Project Approval

• Project Research

• Purchase all required parts

• Project Research

2 10/19-10/25

• Build Schematics

• Order all parts

• Test individual components

• Schematics for the overall system is done

• Order all parts

3 10/26-11/1

• Begin hardware design interfacing a laser, photo-resistor and SJ One Board

• Test the hardware design

• Hardware design implementation started

4 11/2-11/8

• Trouble shoot hardware design with

• Test the hardware as a whole

• Hardware design implementation interfacing a laser, photo-resistor and SJ One Board completed

5 11/9-11/15

• Research about Bluetooth communication

• Build Bluetooth circuit

• Test the hardware design

• Starting software interfacing previous hardware implementation

• Read data sheet for Bluetooth communication

6 11/16-11/22

• Interface Bluetooth communication with SJ One Board

• Test the complete hardware interface

• Order another board for Bluetooth communication

• Research more about Bluetooth communication

7 11/23-11/29

• Test Bluetooth communication with SJ One Board

• Hardware design implementation interfacing a laser, photo-resistor, bluetooth communication and SJ One Board started

8 11/30-12/6

• Complete the software interfaces for laser, SJ One Board and Bluetooth communication

• Implement text message feature with Bluetooth communication

• Debugging bluetooth communication interface

9 12/7-12/13

• Finish Debugging text message communication feature

• Start writing project report

• Test system design

• Started implementing SMS feature with bluetooth communication

• Continued the project report

10 12/14-12/16

• Complete system testing

• Finish project report

• Debugging SMS/ bluetooth communication

• Completed system testing

• Created video for presentation

• Finish project report

11 12/17

• Demo Project on Thursday, December 17, 2015

• Demo Project completed

Parts List & Cost

Design & Implementation

Hardware Design

Hardware Interface

Software Design

Implementation

Testing & Technical Challenges

My Issue #1

Conclusion

Project Video

Project Source Code

References

Acknowledgement

References Used

Appendix

Quantity Item Cost
2 SJ One Board $80.00
1 Quad-band Cellular Duck Antenna SMA $7.95
1 RN42-XV Bluetooth Module - PCB Antenna $24.95
1 Mini Photocell $1.50
1 SparkFun Cellular Shield - MG2639 $69.95
1 Arduino Uno R3 $24.95
1 LED $0.10
1 Resistors 8.2K, 2.7K and 1K ohms $0.20