F15: Fury

From Embedded Systems Learning Academy
Revision as of 15:32, 6 October 2015 by 243 user5 (talk | contribs) (Schedule)

Jump to: navigation, search

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Project Title

Abstract

This section should be a couple lines to describe what your project does.

Schedule

Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.

Sl. No Start Date End Date Task Actual End date Problems Encountered
1 09/20/2015 09/27/2015 Buy RC Car 09/26/2015 None
2 09/27/2015 10/3/2015 Divide the modules among team members 10/2/2015 None
3 10/3/2015 10/10/2015 Decide the pins used by each module
4 10/10/2015 10/25/2015 Get the main board ready which connects all SJOne boards
5 10/3/2015 10/30/2015 Work on individual modules
6 10/31/2015 11/13/2015 Sensors, motors and master controller are integrated and tested.

GPS, android and master are integrated and tested

7 11/14/2015 12/10/2015 Integration, testing and tweaking
8 12/16/2015 12/16/2015 Final testing

Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

Introduction

The Controllers

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Master Controller

Group Members

Schedule

Sl.No Start Date End Date Task Status Actual Completion date Problems Encountered
1 9/23/2015 10/2/2015 Task list Completed/ongoing 10/1/2015 problems?

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Motor and I/O controller

Group Members

  • Sin Yu Ho
  • Nimmi Bhatt

Schedule

Sl.No Start Date End Date Task Status Actual Completion date Problems Encountered
1 9/23/2015 10/2/2015 Task list Completed/ongoing 10/1/2015 problems?

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Sensor Controller

Group Members

Schedule

Sl.No Start Date End Date Task Status Actual Completion date Problems Encountered
1 9/27/2015 10/3/2015 Order ultra sonic sensors and read data sheets Completed 10/2/2015 N/A
2 10/4/2015 10/10/2015 Connect ultra sonic sensor to LPC board & see if LDAR is an option Incomplete  ??/??/???? N/A
3 10/11/2015 10/17/2015 Read data value from sensor and send in CAN bus Incomplete  ??/??/???? N/A
4 10/18/2015 10/24/2015 Integrate and test proximity Incomplete  ??/??/???? N/A
5 10/25/2015 10/31/2015 Develop light sensor code Incomplete  ??/??/???? N/A
6 11/01/2015 11/07/2015 Integrate and test light sensor Incomplete  ??/??/???? N/A
7 11/08/2015 11/21/2015 Complete hardware testing Incomplete  ??/??/???? N/A

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Geographical Controller and Compass

Group Members

  • Abhishek Gurudutt
  • Tejeshwar Chandra Kamaal

Schedule

Sl.No Start Date End Date Task Status Actual Completion date Problems Encountered
1 9/23/2015 10/2/2015 Researched and decided upon the GPS module and Compass module. Completed 10/1/2015 None
2 10/3/2015 10/3/2015 Ordered GPS module and compass module. Completed 10/2/2015 None
3 10/5/2015 10/14/2015 Interface GPS module and

compass module to SJOne board.

In-progress - -
4 10/15/2015 10/25/2015 Designing GPS driver

Test code to get compass reading information

- - -
5 10/26/2015 10/30/2015 Integration with Android module,

testing and fine tuning.

- - -
6 11/1/2015 11/13/2015 Integration with Master through CAN bus. - - -
7 11/15/2015 12/10/2015 Testing and calibrating with other modules. - - -

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Android & Communication Bridge Controller

Group Members

Schedule

Sl.No Start Date End Date Task Status Actual Completion date Problems Encountered
1 9/23/2015 10/2/2015 Task list Completed/ongoing 10/1/2015 problems?

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Integration

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.