Difference between revisions of "Embedded System Tutorial Tasks"

From Embedded Systems Learning Academy
Jump to: navigation, search
 
(3 intermediate revisions by 2 users not shown)
Line 1: Line 1:
The objective of the assignment is to create multiple tasks and observe how they behavePlease create two tasks, and have them run the following code:
+
Socialledge is moving to two portals.   
 +
*  The Wiki will remain here for general references about the SJ-One board, and to document student reports.
 +
*  The bookstack will now be used for SJSU assignments
  
<syntaxhighlight lang="c">
+
[http://books.socialledge.com/books/embedded-drivers-real-time-operating-systems/page/lab-assignment-freertos-tasks This article has been moved here]
// Create a task and run this code in a while(1) loop
 
void task_one_code(void)
 
{
 
    uart0_puts("aaaaaaaaaaaaaaaaaaaa");
 
    vTaskDelay(100);
 
}
 
 
 
void task_two_code(void)
 
{
 
    uart0_puts("bbbbbbbbbbbbbbbbbbbb");
 
    vTaskDelay(100);
 
}
 
</syntaxhighlight>
 
 
 
<H3>Further Guidelines</H3>
 
*  Use FreeRTOS xTaskCreate() to create tasks and use example code for reference.
 
*:  You may have to take some things for granted, such as "stack size" and 2048 bytes is enough stack size to run these tasks
 
*  Use vTaskDelay() to "sleep"
 
*  Do not use printf, instead use uart0_puts() function from #include "uart0_min.h"
 
 
 
<H3>Hints</H3>
 
*  The printf data appears over 38400bps UART, which can roughly send 4 characters per millisecond
 
*:  When you send 20 chars (aaaaaaaaaaaaaaaaaaaa), it would take roughly 5ms to send the data
 
*  The SJ-One board RTOS runs at 1Khz
 
 
 
<H3>Assignment</H3>
 
Observe and turn in with your assignment:
 
*  How come 4(or 3 sometimes) characters are printed from each task?  Why not 2 or 5, or 6?
 
*  Alter the priority of one of the tasks, and note down the observations.  Note down WHAT you see and WHY.
 
 
 
Turn in (to Canvas):
 
#  Relevant code
 
#  Your observation and explanation
 
#  Snapshot of the output for all scenarios.
 

Latest revision as of 19:55, 25 January 2019

Socialledge is moving to two portals.

  • The Wiki will remain here for general references about the SJ-One board, and to document student reports.
  • The bookstack will now be used for SJSU assignments

This article has been moved here