F24: Space 6
Contents
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
Project Title
Space 6
Abstract
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
Team Members & Responsibilities
- Ambarish Govindarajulu Kaliamurthi
- Jesus Morales
- Randy Nguyen
Schedule
| Week# | Start Date | End Date | Task | Status |
|---|---|---|---|---|
| 1 |
|
|
|
|
| 2 |
|
|
|
|
| 3 |
|
|
|
|
| 4 |
|
|
|
|
| 5 |
|
|
|
|
| 6 |
|
|
|
|
| 7 |
|
|
|
|
| 8 |
|
|
|
|
| 9 |
|
|
|
|
Parts List & Cost
Give a simple list of the cost of your project broken down by components. Do not write long stories here.
| Item# | Description | Quantity | Price |
|---|---|---|---|
| 1 |
SJ2C Board |
1 |
$50.00 |
| 2 |
LED Display (WaveShare 64x64) |
1 |
$85.95 |
| 3 |
Momentary switches |
5 |
$8.99 |
| 4 |
Jumper wires |
Pack |
$6.99 |
| 5 |
5V Power Supply |
1 |
$ 16.99 |
| 6 |
MP3 serial module |
1 |
$ 8.39 |
| 7 |
Linear Potentiometer |
1 |
$ 28.73 |
| 8 |
Game enclosure (wood / paint / adhesive) |
Misc |
$ 30.00 |
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
MP3 Decoder
Hardware Interface and Connections
|
Connection Table: MP3 Player to SJ2 Board
|
Supported Specifications
- File Formats: MP3, WAV
- Sampling Frequencies: 8 kHz, 11.025 kHz, 12 kHz, 16 kHz, 22.05 kHz, 24 kHz, 32 kHz, 44.1 kHz, 48 kHz
- SD cards (≤2GB) / SDHC cards (≤32GB)
- File System: FAT16, FAT32
- UART Baud Rate: 9600 bps
- Volume Levels: 30 adjustable levels in hex
- Power Supply: 3.2–5.2 VDC (3.3V)
Software Design
We developed a driver for the MP3 player module that sets up UART communication and connects the RX and TX pins properly. The driver makes it easy to send commands to the MP3 player, such as adjusting the volume, playing specific songs by their number or folder, skipping tracks, and setting playback modes like repeatt. For more details, check out the user manual: [2]
Implementation
- Initialize MP3 decorder: Get the MP3 player ready by selecting the SD card that has your songs.
- Cycle play mode: Set a song to play on repeat.
- Pause a song: Temporarily stop playback.
- Resume playback: Continue playing the song from where it was paused.
- Play by index: Start playback of a specific song using its number.
- Set volume: Adjust the playback volume to a desired level.
- Next song: Skip to the next track in the playlist.
- Previous song: Go back to the previous track in the playlist.
Code Structure
- Initialization: Call sound_manager__init() to set up the sound manager, including initializing the MP3 decoder, creating FreeRTOS tasks for each sound effect, and configuring semaphores for synchronization.
- Pin Selection: Configure the UART pins in mp3_dec.c using gpio__construct_with_function() to match your hardware setup.
- Sound Effects: Trigger sound effects using the provided functions in the sound manager:
sound_manager__play_laser();
sound_manager__play_explosion();
sound_manager__play_won_game();
check here for more [3]
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
<Bug/issue name>
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
