S22: Testla

From Embedded Systems Learning Academy
Revision as of 22:12, 12 April 2022 by 243 user5 (talk | contribs) (→‎DBC File)

Jump to: navigation, search

Testla

<Group Pic>


Abstract

The Testla project is the culmination of our efforts to create an autonomously operated RC Car by pooling together our experience in software design, hardware design, power systems, and mobile application development. Project development started in February of 2022 and ended in May. (NOTE: One more sentence probably)

Introduction

The project was divided into 5 modules:

  • Bridge and Sensor Information
  • Motor Operation
  • Geological Information
  • Driver and LCD Manager
  • Android Application

Team Members & Responsibilities

Gitlab Project Link

<Provide ECU names and members responsible> <One member may participate in more than one ECU>

  • Sensor
    • Bang Nguyen --couldn't find your gitlab
  • Testing Team
    • Link to Gitlab user1
    • Link to Gitlab user2

(not sure exactly which role Bang is doing...)


Schedule

Week# Start Date End Date Task Status
1 02/15/2022 02/21/2022
  • Read previous projects, gather information and discuss among the group members.
 Completed
2 02/22/2022 02/28/2022
  • Distribute modules to each team member.
 Completed
3 03/01/2022 03/07/2022
  • Purchased the RC Car
  • Purchase sensors
 Completed
4 03/08/2022 03/14/2022
  • Learning to use CAN BUSMASTER
 Completed
5 03/15/2022 03/21/2022
  • DBC file discussed and implemented
 Completed
6 03/22/2022 03/28/2022
  • Discuss modules needed for PCB, any feature requests
 Incomplete
7 03/29/2022 04/04/2022
  • tbd
 Incomplete
8 04/05/2022 04/11/2022
  • tbd
 Incomplete
9 04/12/2022 04/18/2022
  • tbd
 Incomplete
10 04/19/2022 04/25/2022
  • tbd
 Incomplete
11 04/26/2022 05/02/2022
  • tbd
 Incomplete
12 05/03/2022 05/09/2022
  • tbd
 Incomplete
13 05/10/2022 05/16/2022
  • tbd
 Incomplete
14 05/17/2022 05/25/2022
  • Final working car
 Incomplete


Parts List & Cost

Item# Part Desciption Vendor Qty Cost
1 Unassembled RC Car Traxxas [1] 1 $279.99
2 CAN Transceivers Amazon [2] 1 $8.99
2 CAN Transceivers Amazon [3] 1 $8.99
2 CAN Transceivers Amazon [4] 1 $8.99
2 CAN Transceivers Amazon [5] 1 $8.99
2 CAN Transceivers Amazon [6] 1 $8.99


Printed Circuit Board

<Picture and information, including links to your PCB>


CAN Communication

<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

Hardware Design

<Show your CAN bus hardware design>

DBC File

<Gitlab link to your DBC file> DBC Link 

VERSION ""

NS_ :
	BA_
	BA_DEF_
	BA_DEF_DEF_
	BA_DEF_DEF_REL_
	BA_DEF_REL_
	BA_DEF_SGTYPE_
	BA_REL_
	BA_SGTYPE_
	BO_TX_BU_
	BU_BO_REL_
	BU_EV_REL_
	BU_SG_REL_
	CAT_
	CAT_DEF_
	CM_
	ENVVAR_DATA_
	EV_DATA_
	FILTER
	NS_DESC_
	SGTYPE_
	SGTYPE_VAL_
	SG_MUL_VAL_
	SIGTYPE_VALTYPE_
	SIG_GROUP_
	SIG_TYPE_REF_
	SIG_VALTYPE_
	VAL_
	VAL_TABLE_

BS_:

BU_: DBG DRIVER MOTOR SENSOR


BO_ 100 DRIVER_HEARTBEAT: 3 DRIVER
 SG_ DRIVER_HEARTBEAT_cmd : 0|8@1+ (1,0) [0|0] "" DBG

BO_ 110 DRIVER_STEERING: 3 DRIVER
 SG_ DRIVER_STEERING_yaw : 0|12@1+ (0.001,-2) [-2|2] "radians" MOTOR
 SG_ DRIVER_STEERING_velocity : 12|12@1+ (0.01,0) [0|40] "kph" MOTOR

BO_ 120 MOTOR_HEARTBEAT: 2 MOTOR
 SG_ MOTOR_HEARTBEAT_cmd : 0|8@1+ (1,0) [0|0] "" DBG
 SG_ MOTOR_HEARTBEAT_encoder : 8|8@1+ (1,0) [0|0] "" DBG

BO_ 130 MOTOR_ACK: 1 MOTOR
 SG_ MOTOR_ACK_cmd : 0|8@1+ (1,0) [0|0] "" DRIVER

BO_ 200 SENSOR_SONARS: 8 SENSOR
 SG_ SENSOR_SONARS_left : 0|10@1+ (1,0) [0|800] "inch" DRIVER
 SG_ SENSOR_SONARS_right : 10|10@1+ (1,0) [0|0] "inch" DRIVER
 SG_ SENSOR_SONARS_middle : 20|10@1+ (1,0) [0|0] "inch" DRIVER
 SG_ SENSOR_SONARS_back : 30|10@1+ (1,0) [0|0] "inch" DRIVER
 SG_ SENSOR_SONARS_frame_id : 42|16@1+ (1,0) [0|0] "" DRIVER

BO_ 200 GPS_DESTINATION_LOCATION: 8 SENSOR
 SG_ GPS_DEST_LATITUDE : 0|28@1+ (0.000001,-90.000000) [-90|90] "Degrees" GEO
 SG_ GPS_DEST_LONGITUDE : 28|28@1+ (0.000001,-180.000000) [-180|180] "Degrees" GEO

BO_ 220 GEO_STATUS: 8 GEO
  SG_ GEO_STATUS_COMPASS_HEADING : 0|12@1+ (1,0) [0|359] "Degrees" DRIVER
  SG_ GEO_STATUS_COMPASS_BEARING : 12|12@1+ (1,0) [0|359] "Degrees" DRIVER
  SG_ GEO_STATUS_DISTANCE_TO_DESTINATION : 24|16@1+ (0.1,0) [0|0] "Meters" DRIVER

CM_ BU_ DRIVER "The driver controller driving the car";
CM_ BU_ MOTOR "The motor controller of the car";
CM_ BU_ SENSOR "The sensor controller of the car";
CM_ BO_ 100 "Sync message used to synchronize the controllers";
CM_ SG_ 100 DRIVER_HEARTBEAT_cmd "Heartbeat command from the driver";

BA_DEF_ "BusType" STRING ;
BA_DEF_ BO_ "GenMsgCycleTime" INT 0 0;
BA_DEF_ SG_ "FieldType" STRING ;

BA_DEF_DEF_ "BusType" "CAN";
BA_DEF_DEF_ "FieldType" "";
BA_DEF_DEF_ "GenMsgCycleTime" 0;

BA_ "GenMsgCycleTime" BO_ 100 1000;
BA_ "GenMsgCycleTime" BO_ 200 50;
BA_ "FieldType" SG_ 100 DRIVER_HEARTBEAT_cmd "DRIVER_HEARTBEAT_cmd";

VAL_ 100 DRIVER_HEARTBEAT_cmd 2 "DRIVER_HEARTBEAT_cmd_REBOOT" 1 "DRIVER_HEARTBEAT_cmd_SYNC" 0 "DRIVER_HEARTBEAT_cmd_NOOP" ;


Sensor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Motor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Geographical Controller

The Geological controller is responsible for determining the position of the vehicle as well as the distance and bearing to desired destination.

Adafruit gps.jpg

Hardware Design

An Adafruit Ultimate GPS breakout module using the MTK3339 chipset is interfaced over UART to the Geological controller to provide latitude and longitude updates.

TODO: interface and explain compass

Software Design

On startup the GPS module is initialized to provide updates at 10Hz with a 115200 baud rate. Additionally, the Bridge and Sensor controller sends a desired latitude and longitude to the Geo controller over the CAN bus.

The desired and current position are used to calculate a distance and bearing using the haversine formula shown below.

Haversine.PNG

Moveable Type Scripts: Calculate distance, bearing and more between Latitude/Longitude points

Technical Challenges

< List of problems and their detailed resolutions>



Communication Bridge Controller & LCD

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Master Module

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Mobile Application

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>




Conclusion

<Organized summary of the project>

<What did you learn?>

Project Video

Project Source Code

Advise for Future Students

<Bullet points and discussion>

Acknowledgement

References

Retrieved from "http://socialledge.com/sjsu/index.php?title=S22:_Testla&oldid=67368"