File:Space invader 3d print side.jpg

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it. If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Apple
Camera model	iPhone 12 Pro Max
Exposure time	1/30 sec (0.033333333333333)
F Number	f/1.6
ISO speed rating	800
Date and time of data generation	17:12, 26 November 2020
Lens focal length	5.1 mm
Latitude	38° 11′ 47.55″ N
Longitude	121° 43′ 13.27″ W
Altitude	10.205 meters above sea level
Orientation	Rotated 90° CCW
Horizontal resolution	72 dpi
Vertical resolution	72 dpi
Software used	14.2
File change date and time	17:12, 26 November 2020
Y and C positioning	Centered
Exposure Program	Normal program
Exif version	2.31
Date and time of digitizing	17:12, 26 November 2020
Meaning of each component	Y Cb Cr does not exist
APEX shutter speed	4.9069050202753
APEX aperture	1.3561438092556
APEX brightness	-1.4495743956418
APEX exposure bias	0
Metering mode	Pattern
Flash	Flash did not fire, auto mode
DateTimeOriginal subseconds	779
DateTimeDigitized subseconds	779
Supported Flashpix version	0,100
Color space	Uncalibrated
Sensing method	One-chip color area sensor
Scene type	A directly photographed image
Exposure mode	Auto exposure
White balance	Auto white balance
Focal length in 35 mm film	26 mm
Scene capture type	Standard
Speed unit	Kilometers per hour
Speed of GPS receiver	0
Reference for direction of image	True direction
Direction of image	355.22985842986
Reference for bearing of destination	True direction
Bearing of destination	355.22985842986
GPS date	27 November 2020
JPEG file comment	Optimized by JPEGmini 3.18.1.203272772-TBTBLN 0x9036da84