F19: Tower Defense in Space

Logo

Grading Criteria

• How well is Software & Hardware Design described?
• How well can this report be used to reproduce this project?
• Code Quality
• Overall Report Quality:
  • Software Block Diagrams
  • Hardware Block Diagrams

    Schematic Quality

  • Quality of technical challenges and solutions adopted.

Project Title

Tower Defense ... In Space

ABSTRACT

My abstract goes here.

INTRODUCTION AND OBJECTIVES

TEAM MEMBERS & RESPONSIBILITIES
Team Members	Administrative Roles	Technical Roles
[Ryan Zelek]	Team Lead	Game Design Lead
[Zach Smith]	Git Repo Manager	Hardware Design Lead
[Chong Hang Cheong]	Wiki Report Manager	LED Matrix API
[Polin Chen]	Bill of Materials Manager

SCHEDULE

TEAM MEETING DATES & DELIVERABLES
Week#	Date Assigned	Deliverables	Status
1	10/15/19	Share team contact information Create Git Repository Set up group Slack channel Invite Preet to Slack Establish Code Guidelines and Standards	Complete Incomplete Complete Complete Complete
2	10/22/19	Identify major hardware components (BOM) Begin purchasing major items Finalize game architecture Have Git Repo Setup	Complete Complete Complete Incomplete
3	10/29/19	Solidify individual roles and responsibilities Establish baseline software architecture design and guidelines going forward	Complete Complete
4	11/5/19	Kelvin Verify functionality of LED matrix and gather resources for further understanding	Complete
5	11/12/19	Kelvin Find out feasibility of creating an LED matrix driver in C Polin Have APIs ready for joystick and buttons Ryan Have basic user interface for the game displayed through serial port Zach First controller PCB design complete Specify any remaining hardware components and coordinate purchase	Incomplete Incomplete Incomplete Incomplete Incomplete
6	11/19/19	Kelvin Complete baseline API for LED matrix Polin Determine feasibility of MP3 decoding and integration into system Ryan Complete first pass at basic tower defense level with straight pathway Zach Controller PCB sent out for fabrication	Incomplete Incomplete Incomplete Incomplete
7	11/26/19	Kelvin LED matrix driver should be reviewed and complete Polin Work with Zach to identify remaining hardware components and, if applicable, MP3 decoder requirements Ryan Work with Kelvin to integrate his API into the game Game should be running with LED matrix display involvement Advanced game logic design/implementation is near feature complete Zach PCB assembled and tested. Problems identified and solutions proposed	Incomplete Incomplete Incomplete Incomplete Incomplete Incomplete
8	12/3/19	Complete game testing and validation Critical bugs (software AND hardware) identified and a clear path towards closure has been identified	Incomplete Incomplete
9	12/10/19	Continuation of previous week activities (bug fixes, etc) Implement any potential optimizations and/or expansions	Incomplete Incomplete

BILL OF MATERIALS (GENERAL PARTS)

MAJOR COMPONENTS
PART NAME	PART MODEL & SOURCE	QUANTITY	COST PER UNIT (USD)
32x64 RGB LED Matrix	[1]	2	$49.95

HARDWARE INTEGRATION PCB

Hardware Design

The hardware integration PCB was designed with two goals:

1. Minimize the footprint of the onboard electronics
2. Minimize the chances of wires disconnecting, during drives

To accomplish these goals,

The board consisted of n layers:

layer name

Technical Challenges

Design

• Balancing priorities between HW design and getting a working prototype

Assembly

• Wireless antenna connector on master board not accounted for in footprint, it may have to be removed to avoid interference with one connector.

Bill Of Materials

HARDWARE INTEGRATION PCB
PART NAME	PART MODEL	QUANTITY	COST PER UNIT (USD)

---

TEST

In order

Hardware Design

During

We used

CONCLUSION

This pr