S18: Traffic Menace Video Game
Contents
Project Title
RGB LED Traffic Menace Video Game
Abstract
The project focuses on developing a game on a 64*64 RGB LED . The game is all about controlling a car on a road having traffic. The Led would be displaying a user controlled car and road with many different cars on it. All that the user needs to do is tilt the LED screen to avoid traffic and safely drive the car. An accelerometer is used to detect the tilt of the LED screen and move the car accordingly. As the number of level increases the car speed would increase.
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
Team Members & Responsibilities
- Danny Santoso
- Hardware and Pcb Design
- Dheemanth Bangalore Vishwanatha
- LED Display Driver
- Integrating Display code to Accelerometer
- Testing
- Monica Paramanand
- UI Design and Animations
- Pratap Kishore Desai
- LED Display Driver
- Game Algorithm Development
- Pratap Ramachandran
- Game Algorithm Development
- Testing
Schedule
Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.
| Week# | Date | Task Planned | Actual Work | Description |
|---|---|---|---|---|
| 1 | 4/10/18 | Project Job Discussion/Parts List | Project Division Discussion/Project Scope | Completed |
| 2 | 4/17/18 | WikiPage Creation/Project Progression/Parts Ordered | WikiPage | In-Progress |
| 3 | 4/24/18 | Task list | Completed? Problems Encountered? | |
| 4 | 5/1/18 | Task list | Completed? Problems Encountered? | |
| 5 | 5/8/18 | Task list | Completed? Problems Encountered? |
Parts List & Cost
| Part Name | Cost | Qty | Comments |
|---|---|---|---|
| SJone Board | 1 | LED controller | |
| LEDs strips | 3-4 | REG LED's | |
| PCB | 1 | One for SJone Board |
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
<Bug/issue name>
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
