File:Hardware connection sjone hc 05.png
From Embedded Systems Learning Academy
Revision as of 00:49, 16 December 2017 by Proj user3 (talk | contribs) (This image describes the hardware connections of HC-05 module with SJOne board. It is a serial to Bluetooth converter. Firmware on the module takes care of low level communication code like connecting to device, transferring data at higher speed that U...)
No higher resolution available.
Hardware_connection_sjone_hc_05.png (416 × 416 pixels, file size: 19 KB, MIME type: image/png)
This image describes the hardware connections of HC-05 module with SJOne board. It is a serial to Bluetooth converter. Firmware on the module takes care of low level communication code like connecting to device, transferring data at higher speed that UART and keep in sync. with UART communication. All we need to do is connect this module with our controller and send data over UART pins connected to this module.
File history
Click on a date/time to view the file as it appeared at that time.
| Date/Time | Thumbnail | Dimensions | User | Comment | |
|---|---|---|---|---|---|
| current | 00:49, 16 December 2017 | | 416 × 416 (19 KB) | Proj user3 (talk | contribs) | This image describes the hardware connections of HC-05 module with SJOne board. It is a serial to Bluetooth converter. Firmware on the module takes care of low level communication code like connecting to device, transferring data at higher speed that U... |
- You cannot overwrite this file.
File usage
The following page links to this file:
