S15: Remote Learner
Contents
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
Remote Learner
Abstract
The objective of this project was to create a remote learner using the SJOne board. The Remote Learner would have the ability to be controlled by an Android application using Bluetooth. The application would tell the SJOne board to learn a remote control using the IR sensor or transmit the remote command via IR LED..
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
Team Members & Responsibilities
- Bailey Wu - Android App and BT I/F
- Yoni Klein - RX and IR Learning
- Tejeswar - IR Protocol
- Christopher Laurence - TX
Schedule
Remote Learner
| Week | Start Date | End Date | Task | Status | Actual Completion Date |
|---|---|---|---|---|---|
| 1-2 | 3/27/2015 | 4/10/2015 | Research about the basic of remote controller protocols | Completed | 3/10/15 |
| 3 | 4/10/2015 | 4/17/2015 | Research about transmit timing of the protocol and analyze the data with a oscilloscope
Research about receive timing of the protocol and analyze the data with a oscilloscope |
Completed | 4/17/2015 |
| 4 | 4/17/2015 | 4/24/2015 | Accurately decode IR signals from a remote control
Accurately transmit IR signals to a device |
Completed | 5/2/2015 |
| 5 | 4/24/2015 | 5/1/2015 | Interface BT module and establish communication with the Android phone
Decide on a communication protocol between phone and board. |
Planned | TBD |
| 6-7 | 5/1/2015 | 5/15/2015 | Research and add additional protocol support | Completed | 5/15/2015 |
| 8 | 5/15/2015 | 5/22/2015 | Final integration and testing. | Planned | TBD |
Android Application
| Week | Start Date | End Date | Task | Status | Actual Completion Date |
|---|---|---|---|---|---|
| 1 | 4/6/2015 | 4/13/2015 | Research about Android application development
Research about Bluetooth module implementation with SJOne board |
Completed | 4/10/2015 |
| 2 | 4/13/2015 | 4/20/2015 | Implement and design a basic Android application on Android Studio
Implement the Bluetooth module using UART |
Ongoing | TBD |
| 3 | 4/20/2015 | 4/27/2015 | Continue development of the Android application
Establish a connection between the SJOne board and Android application through Bluetooth |
Planned | TBD |
| 4 | 4/27/2015 | 5/4/2015 | Collaborate with team members to integrate the Android application and remote learner functions | Planned | TBD |
| 5 | 5/4/2015 | 5/11/2015 | Debug and troubleshoot any issues that may arise | Planned | TBD |
| 6 | 5/11/2015 | 5/18/2015 | Miscellaneous | Planned | TBD |
Parts List & Cost
Give a simple list of the cost of your project broken down by components. Do not write long stories here.
| Line Item# | Part Desciption | Vendor | Part Number | Qty | Cost ($) |
|---|---|---|---|---|---|
| 1 | 120 Resistor | Anchor Electronic | N/A | 10 | 1.00 |
| 2 | IR LED 1.5 V 40mA | Anchor Electronic | N/A | 4 | 1.00 |
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
|
Transmit IR LED:
|
File:IR LED Circuit.png IR LED circuit |
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
My Issue #1
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
