S15: Patient Buddy System (PBS)

From Embedded Systems Learning Academy
Revision as of 17:42, 21 April 2015 by Proj user7 (talk | contribs)

Jump to: navigation, search

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Patient Buddy System

Abstract

A system to enable the doctor to remotely detect the physiologic measurements of multiple patients (up to 3), receive alerts if patients’ conditions get critical and send a message to the patient informing them about the next steps. The system measures heartbeat, body temperature, position and movement of the patient continuously and sends an alert to the doctor automatically when the critical conditions are reached.

Objectives & Introduction

  • Monitor physiologic measurements of the patients: heartbeat, temperature, movement and patient position
  • Allows the doctor to monitor physiologic data for up to three patients.
  • Send the physiologic data to the doctor upon request,
  • Determine if the patient’s physiological conditions are critical.
  • Automatically alert the doctor of the patient’s conditions if critical conditions are reached.
  • Allow the doctor to send a text to the patient inform them about the next steps.
  • Communication between the boards.

Team Members & Responsibilities

  • Avinash Closepet Suresh
  • Girish Bangalore Ramesh
  • Thiruparan Balachandran
  • Nimmi Bhatt

Schedule

Show a simple table or figures that show your scheduled as planned before you started working on the project. Then in another table column, write down the actual schedule so that readers can see the planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if they are doing a similar project.

Week# Date Task Actual
1 4/14/2015 Order materials, ElectricImp exploration, Patient Position Completed ordering materials
2 4/21/2015 Develop position details about the subject's orientation via the accelerometer, test different algorithm methods and store the data in Flash. Completed getting the position details and developing a basic algorithm; Attempts to modify the algorithm are in progress.
3 4/28/2015 End to End Communication: Getting the data from the sensor and displaying it on the app's page. Planned
4 5/05/2015 Add other sensors to the system (temperature and heart rate) and work on doctor to patient communication and implement some emergency feature. Planned 5 5/12/2015 Improve app and work on data analysis on the app's side to make the data look meaningful and interesting. Planned 6 5/19/2015 Test the system and add other details about the data (such a monitor change in heart rate, etc.) Planned 7 5/22/2015 Demo! Planned

}

Parts List & Cost

Pulse sensor = 25 $ ElectricImp Breakout Board ElectricImp IC Temperature Sensor

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.