S24: Team Zero

1 Project Title
2 Abstract
- 2.1 Introduction
- 2.2 Team Members & Responsibilities
3 Schedule
4 Parts List & Cost
5 Printed Circuit Board
6 CAN Communication
- 6.1 Hardware Design
- 6.2 DBC File
7 Sensor ECU
8 Motor ECU
9 Geographical Controller
10 Communication Bridge Controller & LCD
11 Master Module
12 Mobile Application
13 Conclusion

Project Title

TEAM ZERO

Abstract

Team Zero's Self driving RC car, as the name states, is an autonomous vehicle designed to navigate to a given specified destination successfully, avoiding obstacles along its way. The car's infrastructure is built upon four key components: the Driver, Sensor and Bridge, Geo, and Motor nodes, which communicate internally via a CAN Bus and with the user via a mobile app. The vehicle continuously senses and processes all the information from these nodes to make decisions to ensure it stays on course and reaches its destination. It is built on a hobby-grade RC car chassis, modified with the necessary components and adjustments to fulfill its primary objectives of autonomous navigation and obstacle avoidance.

Introduction

The project was divided into N modules:

Geographical Controller and LCD
Motor Controller
Sensor-Bridge Controller
Driver Controller
Mobile Application

Team Members & Responsibilities

Gitlab Project Link - [1]

Cody Ourique [2]

Geo controller
Hardware design and development
LCD
Unit Testing

Anusha Arunnandi [3]

Bridge-Sensor controller
Web application
Unit Testing

Chaitanya Battula [4]

Driver controller
Motor controller
Unit Testing

Rohit Duvvuru [5]

Unit Testing

Schedule

Week#	Start Date	End Date	Task	Status
1	03/03/2024	03/09/2024	Read previous projects, gather information and discuss among the group members. Distribute modules to each team member. Decide on list of parts to be used.	Completed
2	03/10/2024	03/16/2024	Order sensor parts, RC car, and other items from list. Complete implementation of controller interfaces using custom values and communicating over CAN Bus with DBC.
3	03/17/2024	03/23/2024	Receive all parts from list Start hardware prototype design Integrate sensor values into Sensor controller interface. Connect Motor, Driver, and Sensor modules over CAN Bus and verify their messages.
4	03/24/2024	03/30/2024	Connect geographical modules over CAN Bus and verify messages Connect sensors to RC car Prototype hardware components on bread board
5	03/31/2024	04/06/2024	Connect sensors to RC car/perf board
6	04/07/2024	04/13/2024
7	04/14/2024	04/20/2024
8	04/21/2024	04/27/2024

Parts List & Cost

Item#	Part Desciption	Vendor	Qty	Cost
1	RC Car	Traxxas [6]	1	$239.95
2	RPM sensor	Traxxas [7]	1	$12.00
3	GPS Breakout Board	Adafruit [8]	1	$54.95
4	PCB Prototype Circuit Board	A1 Cables N PCBs [9]	1	$8.57
5	Plexiglass	Lesnlok [10]	1	$9.98
6	WiFi Breakout Board	Adafruit [11]	1	$9.95
7	Magnetometer	Adafruit [12]	1	$5.95
8	Ultrasonic Rangefinder	Adafruit [13]	4	$114.00

Printed Circuit Board

CAN Communication

Hardware Design

DBC File