F18: baem geim

Grading Criteria

How well is Software & Hardware Design described?
How well can this report be used to reproduce this project?
Code Quality
Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
  Schematic Quality
- Quality of technical challenges and solutions adopted.

baem geim - Snake Game Reborn

Abstract

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

Bharath Vyas Balasubramanyam
Neeraj Dhavale
Sudharshan Aithal
Vignesh Kumar Venkateshwar

Schedule

Week#	Date	Task	Status	Actual Completion Date
1	10/20/2018	Purchase/order of Components and workload distribution	Completed	10/22/2018
2	10/27/2018	Work on LED Matrix Driver Basic Design of Game Algorithm
3	11/03/2018	Implementation of Primary Snake Movements.
4	11/10/2018	Write a driver for Joystick/Touchscreen. Collision Detection of Snake against the wall and with itself
5	11/17/18	Display the Score and Game over on completion. Test the working of Game.
6	11/24/18	Design Schematic and Layout using eagle software. Order for PCB fabrication.
7	12/01/18	Final Testing of the Game.

Parts List & Cost

Parts List:

LPC1758 SJone Board
32*32 LED Matrix
TouchScreen Module/Joystick

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include subsections that list out a problem and solution, such as:

<Bug/issue name>

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

Sourceforge Source Code Link

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.