CAN BUS Tutorial
From Embedded Systems Learning Academy
Revision as of 16:22, 2 October 2013 by Preet (talk | contribs) (Created page with "== CAN BUS == <font color="red"> This article is under construction </font> === CAN BUS Frame === === Transceiver === Unlike other BUSes that can be up and running without a...")
CAN BUS
This article is under construction
CAN BUS Frame
Transceiver
Unlike other BUSes that can be up and running without any external hardware, CAN BUS REQUIRES a voltage transceiver that converts logical Rx/Tx pins into a single differential pair wire that is hooked up on the CAN BUS.
