F20: Tom & Jerry

From Embedded Systems Learning Academy
Revision as of 01:26, 15 November 2020 by Proj user8 (talk | contribs) (Bills of Materials)

Jump to: navigation, search

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.

Tom & Jerry

Abstract

The idea is to relive the childhood days using this game. The mouse will run inside the maze. The maze will be displayed on the RGB matrix. The route for the mouse will be selected from the pre-defined path at initial state in runtime. The cat (player) will chase this mouse by tilting the board left and right. The cat motion will be deliberated in the forward direction. We are using the SoC accelerometer in SJ2 board for sensing the motion. The cat must catch the mouse before mouse reaches its destination hole. If cat get attracted to drink milk (this is an obstacle), then it must halt for some time, and this will waste it’s time for a while at the same place. The mouse will start running first and then after a delay, the cat will start its motion. The score will be displayed on the LCD which is optional display.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

  • Sarika Natu
  • Shivani Pradeep Tambatkar
  • Soumya Sahu


Technical Responsibilities

Responsibilities
  • Accelerometer Driver
Shivani Pradeep Tambatkar
  • LED Matrix Driver
Soumya Sahu
  • Enclosure
Shivani
  • PCB
Shivani Pradeep Tambatkar
  • MP3 Decoder
Sarika Natu
  • LED Matrix & Accelerometer Integration
Soumya Sahu & Shivani Pradeep Tambatkar

Administrative Responsibilities

Administrative Responsibilities
  • Wiki Page Update Manager
Shivani Pradeep Tambatkar
  • BOM
Soumya Sahu
  • Git Repository
Sarika Natu
  • Finance Manager
Soumya Sahu

Schedule

Week# Start Date End Date Task Status
1
  • 09/22/2020
  • 09/29/2020
  • 09/28/2020
  • 09/29/2020
  • Literature Survey of Previous year Projects
  • Submission of Project Proposal
  • Completed
  • Completed
2
  • 10/16/2020
  • 10/20/2020
  • Created GitLab Repository post project proposal approval
  • Create Wiki page for our project
  • Create Wiki Schedule
  • Completed
  • Completed
  • Completed
3
  • 10/20/2020
  • 10/27/2020
  • Read and familiarize with LED Matrix Datasheet
  • Read and familiarize with Accelerometer MMA8452Q datasheet.
  • Completed
  • Completed
4
  • 10/27/2020
  • 11/03/2020
  • Finalize Components and place the order for the required parts
  • Completed
5
  • 11/03/2020
  • 11/10/2020
  • Write multiple lines on LED Matrix successfully (Soumya)
  • Finalize the wiki schedule
  • Modifying code to detect all four directions from accelerometer (Shivani)
  • Reading MP3 datasheet and started writing driver (Sarika)
  • Completed
  • Completed
  • Completed
  • Completed
6
  • 11/10/2020
  • 11/17/2020
  • Drawing basic maze module on LED matrix(Soumya)
  • PCB Layout Design on Eagle (Shivani)
  • Read song from MP3 list and execute on hardware (Sarika)
  • Basic integration for controlling characters on maze (Soumya & Shivani)
  • In Progress
  • In Progress
  • In Progress
  • Not started
7
  • 11/18/2020
  • 11/24/2020
  • Finalize game logic and game architecture
  • Integrate game logic code with LED matrix
  • Assemble the components and begin testing
  • Not started
  • Not started
  • Not started
8
  • 11/25/2020
  • 12/01/2020
  • Integrate MP3 with game setup
  • Establish complete connection on PCB
  • Update the wiki page.
  • Not started
  • Not started
  • Not started
9
  • 12/02/2020
  • 12/08/2020
  • Address bugs during testing of integrated system
  • Integrate all components and finalize packaging
  • Not started
  • Not started
10
  • 12/09/2020
  • 12/14/2020
  • Update Gitlab repo with final code.
  • Update test video.
  • Final wiki page update.
  • Not started
  • Not started
  • Not started
11
  • 12/16/2020
  • Final Demo
  • Not started


Bills of Materials

Materials

Quantity

  • SJSU DEV 2 Board (SJTWO)
  • 1 (Purchased from Preet Kang)
  • Sparkfun MP3 Decoder
  • 1
  • Sparkfun 32x64 LED Matrix
  • 1
  • 5V Barrel Jack Power Supply
  • 1
  • PCB Manufacturing
  • 1
  • Regulator
  • 1
  • Female and Male Headers
  • 4
  • Jumper Wires
  • 25
  • Ribbon Cables
  • 2

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

<Bug/issue name>

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.