Difference between revisions of "F24: Tilt Maze"

Revision as of 23:39, 19 December 2024

Project Title

Tilt Maze

Tilt maze Logo

Abstract

Tilt Maze is a motion-controlled puzzle game that challenges players to navigate a luminous ball through procedurally generated mazes using device tilting mechanics. Players must reach the exit within time constraints while maneuvering around obstacles and collecting power-ups that provide temporary advantages. The game combines physical device control with strategic gameplay elements, offering high replayability through its randomized level design and emphasizing skills in balance, spatial reasoning, and quick decision-making.

Objectives & Introduction

The Tilt Maze Game combines hardware and software to create an interactive puzzle experience. It uses an ADXL345 accelerometer for tilt-based movement control, navigating a character through a maze displayed on a 64x64 LED matrix. FreeRTOS manages concurrent tasks like accelerometer input, display updates, and game logic, ensuring smooth and responsive gameplay. Game states, collision detection, and immersive audio feedback via an MP3 decoder enhance the experience. Semaphores and mutexes ensure thread-safe resource management, while debug outputs provide insights during development. This project demonstrates advanced integration of peripherals and real-time systems in a cohesive gaming application.

Team Members & Responsibilities

• Shreya Belide
• Jyoshna Mallineni
• Pavan Charith

Schedule

Parts List & Cost

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

• LED Matrix Display: 13 GPIO channels on SJ2 microcontroller
• Accelerometer (ADXL345): I2C communication on SJ2 microcontroller (SCL, SDA)
• MP3 Decoder: SPI communication using MOSI, CS, SCK on SJ2 microcontroller
• Speaker: AUX cord for audio output
• Power Supply: 5V/4A adapter for powering the LED matrix and SJ2 microcontroller

Software Design

• LED Matrix:
  • 1. Initialized LED matrix connected pins to board IOs.
  • 2. Designed matrix driver for screen display by rendering maze patterns and player movements.

• Accelerometer:
  • 1. Initialized I2C communication for ADXL345 accelerometer.
  • 2. Configured accelerometer in measurement mode and set sensitivity to ±2g.
  • 3. Processed tilt data to calculate real-time player movement commands.

• Mp3 Player:
  • 1. Initialized using UART2.
  • 2. Set the device to the selected SD card and configured volume level.
  • 3. Played background music and sound effects based on game state.

Implementation

• LED Matrix Driver Functions:
  • 1. `matrix_init`: Initializes GPIO pins for the RGB LED matrix and sets up the synchronization mutex&#8203
  • 2. `display_update`: Refreshes the LED matrix display to reflect any changes
  • 3. `display_clear`: Clears all active pixels on the matrix by setting them to zero
  • 4. `overwrite_pattern_to_screen`: Overwrites a specific pattern onto the LED matrix
  • 5. `append_pattern_to_screen`: Adds a pattern to the existing screen matrix without overwrite

• Accelerometer Driver:
  • 1. `accelerometer_init`: Configures the ADXL345 accelerometer with ±2g sensitivity and sets up I2C communication with semaphores for thread safety
  • 2. `accelerometer_task`: Periodically reads acceleration data, applies smoothing, and updates player position based on tilt movements

• Maze Logic:
  • 1. `get_maze_layout`: Retrieves the maze pattern for the current level
  • 2. `is_wall_at`: Checks if a specific position in the maze contains a wall, used to constrain player movement
  • 3. `is_goal_at`: Determines if the player has reached the maze's goal position to proceed to the next level{index=9}.

• Game Logic:
  • 1. `set_player_to_start`: Resets the player position to the starting point of the current level
  • 2. `handle_collisions`: Detects collisions with walls, traps, and goals, triggering state changes like `GAME_STATE_GAME_OVER` or `GAME_STATE_LEVEL_UP`
  • 3. `change_game_state`: Manages game states such as `GAME_STATE_TITLE`, `GAME_STATE_PLAYING`, and `GAME_STATE_WIN`, and handles music transitions

• MP3 Decoder:
  • 1. `mp3_decoder__init`: Initializes the MP3 decoder, sets the default volume, and selects the storage device
  • 2. `mp3_decoder__play_song_at_index`: Plays a specific song based on its index in single-cycle mode
  • 3. `mp3_decoder__play_song_with_mode`: Allows playback in loop or single-cycle mode, depending on the game state
  • 4. `mp3_decoder__stop_playback`: Stops any active song playback
  • 5. `mp3_decoder__volume_set_level`: Adjusts the volume level of the MP3 decoder

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

<Bug/issue name>

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

• Sourceforge Source Code Link

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.