|
|
| Line 12: |
Line 12: |
| | | | |
| | == Project Title == | | == Project Title == |
| − | Parking Frenzy
| + | Rival Rush |
| | | | |
| | == Abstract == | | == Abstract == |
Revision as of 08:48, 4 November 2024
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
Project Title
Rival Rush
Abstract
Parking Frenzy is car parking video game. The player will be able to move the car in right or left direction, the road itself will be descending towards the car and will also consist of obstacles such as other vehicles. The road will have lanes through which the car must navigate to ultimately be able to slot itself into the right parking spot alongside the road. The parking spots will be randomly generated along the edge of the LED matrix and the player must navigate the car into the spot at the right time or else it will result in a crash. The difficulty of the game will increase as the player reaches a certain amount of points. The difficulty will increase in terms of the speed of the car and the number of obstacles. The final score of the player will be displayed at the end of every game. a speaker attached to the board will generate the game sounds.
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
Team Members & Responsibilities
- Scott LoCascio
- Naeem Mannan
- Rahul Ghadge
Schedule
| Week#
|
Date
|
Task
|
Status
|
| 1
|
03/04
|
- To go through previous 244 projects and discuss with the team members.
- To come up with new ideas for applications specific to FreeRTOS.
|
- Had a brainstorming session with the team and decided to do gaming projects using FreeRTOS.
- Decided to do either car racing game or a ping-pong game.
- Prepared the abstract for the project proposal.
|
| 2
|
03/11
|
- To setup GitLab repository for the project.
- To set up the individual accounts for first-time Git users in the team.
|
- Created a GitLab repository, "Magnumopus" for the project.
- Got the Git environment ready for all the team member's machines.
- Modified the project abstract by including diagrams and challenges for the project as per Preet's comments.
|
| 3
|
03/18
|
- To decide the structure of the team and divide the project into different modules.
- To assign roles and responsibilities to each team member.
- To finalize the deadlines and deliverables for the project.
|
- Divided the project into different modules like Master, Player, Wireless, LED Display, PCB, and Testing.
- Assigned roles and responsibilities to each member.
- Created a test plan with tasks, deadlines and deliverables assigned to it.
|
| 4
|
03/25
|
- To finalize project layout, connections and components needed.
- To order the project components.
|
- Finalized and ordered the project components.
|
| 5
|
04/01
|
- To implement player module logic to send orientation data to the Master module.
- To start designing the Master module which will take inputs from different players, take a decision and sends it to LED Matrix display.
- To understand the high-level APIs for the Wireless nordic node.
- To understand the connections, read the datasheet for RGB LED Matrix.
- To install Eagle software for PCB design and get accustomed to the basic functions.
|
- Implemented player module logic to get accelerometer values for different orientation and send it to the Master module initially via UART for testing purpose.
- Implemented the high-level task of getting accelerometer values from two players simultaneously via UART and glow on-board LEDs specific to the player data received.
- Understood the Wireless APIs available and wrote a basic code to send-receive data using Nordic.
- Made a basic layout, pin connections, power requirements for 64x64 RGB LED Matrix.
- Installed Eagle software and made a simple circuit to get aquainted with the software.
|
| 6
|
04/08
|
- To test the Player and Master modules.
- To understand addressing mode, latching, and clock functionality for RGB LED Matrix.
|
- Tested the Player and Master modules individually.
- Player was giving the correct orientation of left and right movement.
- Got a basic idea of addressing specific LEDs on LED Matrix using 5-address lines.
- Understood the functionality of latch, output enable and clock pins of LED Matrix.
|
| 7
|
04/15
|
- Integrate Player and Master modules and make necessary changes as per other module requirements.
- To write the code for glowing one LED.
|
- Integrated Player and Master modules. The master module was able to receive the data from Player module and glow the onboard LEDs based on the player's movement.
- Wrote the code logic to glow the LED but, able to glow a particular row but, not able to glow single LED. Debugging in process.
|
| 8
|
04/22
|
- To send and receive data between Player and Master using Wireless protocol.
- To write the logic to glow a particular LED on the display matrix.
- To design and finalize the PCB circuit.
|
- After proper debugging, we realized that latching was not done properly. Resolved the issue and we are able to glow single pixel.
- Also, able to get different designs like a particular row, column, square, rectangle (solid and hollow).
- PCB design is in progress. Understanding the power circuit requirements.
- Wireless module delayed since all the boards as well as antennas have female connectors.
|
| 9
|
04/29
|
- To implement RGB LED Matrix tasks and APIs for the Master module.
- To integrate the layout of the application (UI, border, car design, obstacle design) to Master Module.
- To generate random obstacles, score logic and implement other game functionalities (eg: game over scenario).
- To display the cars, border area, screen division for 2 cars and enable obstacle and car movement as per the input from the master module.
- Finalize the PCB design, get it reviewed by the team and send it for fabrication.
|
- Implemented Display Matrix APIs to display/glow pixels, solid/dotted lines, borders, cars, numbers, square and triangular obstacles. Also, APIs to clear pixels, car and numbers were implemented.
- Integrated Wireless module with the Player Module to send data wirelessly to the Master Module.
- Integrated Display Matrix APIs with the Master Module to display the borders, show scores, generate random obstacles, and to move cars left or right depending upon the accelerometer values from each player boards.
- Designed the PCB and sent it for fabrication.
|
| 10
|
05/06
|
- To keep moving the display down continuously for the car race track.
- To move the car horizontally pixel by pixel for every change in data from the player module.
- To test the overall functionality of the project using PCB.
|
- Made minor changes in drawPixel() and clearPixel() functions to resolve updating of section 2 of display matrix when any changes made for section 1 and vice versa.
- Implemented display matrix APIs to move the display down, and check if the car hit the obstacle.
- Made changes in Player module to send different character for straight condition of the car and switch on respective onboard LEDs depending upon the player movements.
- Added the logic to update the score depending upon if the car hits square (increment) or triangular (decrement) obstacles.
|
| 11
|
05/13
|
- To Integration of all modules and end to end testing.
- To fix bugs and optimize the code.
|
- Integrated all the modules and optimized the code and fixed the bugs like Player 2 updating late on the display.
- Soldered the available components on the PCB.
|
| 12
|
05/20
|
- Adding extra functionalities and extra features for the project.
- Test the extra features with overall project requirement.
|
- Wrote Display Matrix APIs for letters and texts. Added functions to display the start condition and countdown for the game.
- Added timer functionality in the game. Player will be notified when last 10 seconds are left for the game.
- Made Player Module steerings for real game feel.
|
Parts List & Cost
Give a simple list of the cost of your project broken down by components. Do not write long stories here.
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again?
Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
<Bug/issue name>
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
