Difference between revisions of "S20: Bucephalus"

From Embedded Systems Learning Academy
Jump to: navigation, search
(→‎Team Members & Responsibilities)
(→‎Team Members & Responsibilities)
Line 24: Line 24:
 
* <font color="red"> '''Bridge and Sensor Controller'''
 
* <font color="red"> '''Bridge and Sensor Controller'''
 
**  <font color="black">''' Nicholas Kaiser [https://gitlab.com/nichokaiser  GitLab] [https://www.linkedin.com/in/nicholas-kaiser-20888713b/ LinkedIn]'''
 
**  <font color="black">''' Nicholas Kaiser [https://gitlab.com/nichokaiser  GitLab] [https://www.linkedin.com/in/nicholas-kaiser-20888713b/ LinkedIn]'''
−
** Joel Samson [https://gitlab.com/joel_samson  GitLab] [https://www.linkedin.com/in/joel-samson-86240b105/ LinkedIn]
+
** '''Joel Samson [https://gitlab.com/joel_samson  GitLab] [https://www.linkedin.com/in/joel-samson-86240b105/ LinkedIn]'''
  
−
* <font color="4CA821"> Motor Module
+
* <font color="4CA821"> '''Motor Module'''
−
** <font color="black"> Hari Haran Kura [https://gitlab.com/hariharankura GitLab] [https://www.linkedin.com/in/hariharankura/ LinkedIn]
+
** <font color="black"> '''Hari Haran Kura [https://gitlab.com/hariharankura GitLab] [https://www.linkedin.com/in/hariharankura/ LinkedIn]'''
  
−
* <font color="33BAFF"> Geographical Module  
+
* <font color="33BAFF"> '''Geographical Module'''
−
** <font color="black"> Shreya Patankar [https://gitlab.com/shreya_patankar GitLab] [https://www.linkedin.com/in/shreya-patankar/ LinkedIn]
+
** <font color="black"> '''Shreya Patankar [https://gitlab.com/shreya_patankar GitLab] [https://www.linkedin.com/in/shreya-patankar/ LinkedIn]'''
  
−
* <font color="FUCHSIA"> Communication Bridge Controller & LCD
+
* <font color="FUCHSIA"> '''Communication Bridge Controller & LCD'''
−
** <font color="black"> Mohit Ingale [https://gitlab.com/mohitingale  GitLab] [https://www.linkedin.com/in/mohitingale/ LinkedIn]
+
** <font color="black"> '''Mohit Ingale [https://gitlab.com/mohitingale  GitLab] [https://www.linkedin.com/in/mohitingale/ LinkedIn]'''
−
** Abhinandan Burli [https://gitlab.com/abhinandanburli GitLab] [https://www.linkedin.com/in/abhinandanburli/ LinkedIn]
+
** '''Abhinandan Burli [https://gitlab.com/abhinandanburli GitLab] [https://www.linkedin.com/in/abhinandanburli/ LinkedIn]'''
  
−
* <font color="orange"> Android Application
+
* <font color="orange"> '''Android Application'''
−
** <font color="black"> Basangouda Patil [https://gitlab.com/basangouda46 GitLab] [https://www.linkedin.com/in/basangoudapatil/ LinkedIn]
+
** <font color="black"> '''Basangouda Patil [https://gitlab.com/basangouda46 GitLab] [https://www.linkedin.com/in/basangoudapatil/ LinkedIn]'''
  
−
* <font color="blue"> Testing Team / Code Reviewers  
+
* <font color="blue"> '''Testing Team / Code Reviewers'''
−
** <font color="black"> Basangouda Patil [https://gitlab.com/basangouda46 GitLab] [https://www.linkedin.com/in/basangoudapatil/ LinkedIn]
+
** <font color="black"> '''Basangouda Patil [https://gitlab.com/basangouda46 GitLab] [https://www.linkedin.com/in/basangoudapatil/ LinkedIn]'''
  
−
* <font color="CDCC1C"> Hardware Integration (PCB Designing)
+
* <font color="CDCC1C"> '''Hardware Integration (PCB Designing)'''
−
** <font color="black"> Mohit Ingale [https://gitlab.com/mohitingale  GitLab] [https://www.linkedin.com/in/mohitingale/ LinkedIn]
+
** <font color="black"> '''Mohit Ingale [https://gitlab.com/mohitingale  GitLab] [https://www.linkedin.com/in/mohitingale/ LinkedIn]'''
−
** Abhinandan Burli [https://gitlab.com/abhinandanburli GitLab] [https://www.linkedin.com/in/abhinandanburli/ LinkedIn]
+
** '''Abhinandan Burli [https://gitlab.com/abhinandanburli GitLab] [https://www.linkedin.com/in/abhinandanburli/ LinkedIn]'''
  
−
* <font color="B933FF"> Wiki Page
+
* <font color="B933FF"> '''Wiki Page'''
−
** <font color="black"> Nicholas Kaiser [https://gitlab.com/nichokaiser  GitLab] [https://www.linkedin.com/in/nicholas-kaiser-20888713b/ LinkedIn]
+
** <font color="black"> '''Nicholas Kaiser [https://gitlab.com/nichokaiser  GitLab] [https://www.linkedin.com/in/nicholas-kaiser-20888713b/ LinkedIn]'''
−
** Shreya Patankar [https://gitlab.com/shreya_patankar GitLab] [https://www.linkedin.com/in/shreya-patankar/ LinkedIn] <font color="black">
+
** '''Shreya Patankar [https://gitlab.com/shreya_patankar GitLab] [https://www.linkedin.com/in/shreya-patankar/ LinkedIn] <font color="black">'''
  
 
<BR/>
 
<BR/>

Revision as of 22:52, 12 April 2020

Bucephalus Logo

Abstract

<2-3 sentence abstract>

Introduction

The project was divided into 6 modules:

  • Bridge and Sensor Board
  • Motor Board
  • Geological Board
  • Driver and LCD Board
  • PCB Designing
  • Android

Team Members & Responsibilities

<Team Picture>

Bucephalous GitLab - [1]


Schedule

Week# Start Date End Date Task Status
1 02/16/2020 02/22/2020
  • Setup a team Google Docs folder
  • Brainstorm RC car design options
  • Research past semester RC car projects for ideas and parts needed
  • Put together a rough draft parts list
  • Setup a team GitLab repository
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
2 02/23/2020 02/29/2020
  • Decide on and order chassis
  • Discuss possible GPS modules
  • Discuss schedule for meeting dates and work days (Tuesdays are for code review and syncing, Saturdays are work days)
  • Discuss bluetooth communication approach (1 phone on car, 1 phone in controller's hands)
  • Discuss vehicle's driving checkpoints (checkpoints calculated after point B is specified)
  • Discuss wiring on RC car (1 battery to power motors and 1 power bank for everything else)
  • Discuss GitLab workflow (mirror our repo with Preet's, 3 approvals to merge to "working master" branch, resolve conflicts on "working master" branch, then can merge to master branch)
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
3 03/01/2020 03/07/2020
  • Decide on sensors (4 ultrasonic sensors: 3 in front, 1 in back)
  • Decide on a GPS module (Adafruit ADA746)
  • Research GPS antennas
  • Decide on CAN transceivers (SN65HVD230 IC's)
  • Request 15 CAN transceiver samples from ti.com
  • Discuss tasks of all 4 board nodes (geographical, driver, motors, bridge controller/sensors)
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
4 03/08/2020 03/14/2020
  • Assemble car chassis and plan general layout
  • Delegate tasks for each 2 person teams
  • Create branches for all nodes and add motor and sensor messages to DBC file
  • Discuss and research possible GPS antennas
  • Design block diagrams for motor node, bridge controller/sensor node, and full car
  • Solve GitLab branches vs folders issue (1 branch per node, or 1 folder per node)
  • Order 4 + 1 extra ultrasonic sensors (MaxBotix MB1003-000 HRLV-MaxSonar-EZ0)
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
5 03/15/2020 03/21/2020
  • Decide what to include on PCB board
  • Begin researching filtering algorithms for ultrasonic sensors
  • Read previous student's reports to decide on a compass module (CMPS14)
  • Start learning Android app development
  • Order GPS antenna
  • Driver node is able to respond correctly based on sensor obstacle detection scenarios (correct LED's light up)
  • Ultrasonic sensor values are converted to centimeters and transmit to driver node
  • Research ultrasonic sensor mounts
  • Transmit CAN messages from sensor to driver node, and from driver to motor node
  • Decide movement and steering directions based on all possible sensor obstacle detection scenarios
  • Begin research on PID implementation to control speed of RC car
  • Add GPS node messages (longitude, latitude, heading) and bridge sensor node messages (destination latitude and longitude) to DBC file
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
6 03/22/2020 03/28/2020
  • Draw block diagrams with pin information for each board and begin PCB design based on these diagrams
  • Start implementing a basic Android app without Google maps API and create a separate GitLab repo for app
  • Geological node is able to transmit a heading message to the driver node
  • Bridge sensor node is able to transmit a destination latitude and longitude coordinates message to geological node
  • Decide on ultrasonic sensor mounts and order extra if needed
  • Order a new compass module (CMPS14)
  • Finish designing team logo and upload to Wiki page
  • Continue research on PID controller design and begin basic implementation
  • Finalize parts list and place orders for remaining unordered items
  • Decide on tap plastic acrylic sheet dimensions and PCB dimensions
  • Integrate driver board diagnostic testing with LEDs and ultrasonic sensors (car goes left, left LEDs light up, etc.)
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
7 03/29/2020 04/04/2020
  • Finish a basic implementation of filtering ultrasonic sensor's ADC data
  • Geological node is able to compute the destination heading (0-360 degrees) and send to driver node
  • Add PWM functionality to motor board code and test on DC and servo motors
  • Complete a basic implementation of encoder code on motor board
  • Bluetooth Module driver is finished, can connect to Android phone, and can receive "Hello World" data from phone
  • Complete rough draft of schedule and upload to Wiki page
  • Learn how to integrate Google maps API into Android app
  • Geological node is able to parse the GPS NMEA string to extract latitude and longitude coordinates
  • Complete rough draft of DBC file messages and signals
  • Geological node is able to receive a current heading (0-360 degrees) from the compass module
  • Geological node is able to receive an NMEA string from the GPS
  • Design a block diagram for optimal ultrasonic sensor placement
  • Purchase tap plastic acrylic sheet
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
  • Completed
8 04/05/2020 04/11/2020
  • Finish ultrasonic filtering algorithm for ultrasonic sensor's ADC data
  • Google maps API is fully integrated into Android App
  • Bluetooth Module is able to receive data from Android app
  • Design ultrasonic sensor shields to minimize sensor interferance with each other
  • Discuss checkpoint algorithm
  • Design car state machine
  • Complete motor board code controlling RC car's DC motor and servo motor
  • Finish wheel encoder implementation and integration
  • Test existing motor board code on RC car's motors
  • Finalize PCB schematic and order PCB
  • Completed
9 04/12/2020 04/18/2020
  • Test obstacle avoidance algorithm (indoor)
  • Test checkpoint algorithm (indoor)
  • Establish and test CAN communication between all boards
  • Finalize Displaying sensor and compass data on Android app
  • Finish GPS module integration with geographical controller
  • Finalize car block diagram
  • Finalize car state machine
  • Finish basic implementation of PID control and test on RC car
  • Complete basic implementation and unit testing of checkpoint algorithm
  • Bluetooth module is able to receive desitnation latitude and longitude coordinates from Android app
10 04/19/2020 04/25/2020
  • Finalize PID control implementation and test on car (indoor)
  • Test obstacle avoidance algorithm on car (indoor)
  • Test checkpoint algorithm on car (indoor)
  • LCD display is able to display car's speed, destination coordinates, and current heading data
  • Complete unit testing code for all modules
11 04/26/2020 05/02/2020
  • Finalize destination coordinate transmission from Android app
  • Finalize obstacle avoidance algorithm
  • Finalize checkpoint algorithm
  • Test drive from start to destination (indoor)
  • LCD display is fully integrated onto car chassis
  • Integrate PCB onto RC car chassis
12 05/03/2020 05/09/2020
  • Test drive from start to destination (outdoor)
  • Finalize DBC file
  • Upload rough draft version of report to Wiki page
  • Test PID control implementation (outdoor)
  • Test obstacle avoidance algorithm on car (outdoor)
  • Test checkpoint algorithm on car (outdoor)
13 05/10/2020 05/16/2020
  • Upload final version of report to Wiki page
  • Push final code to GitLab
  • Test drive from start to destination (outdoor)
  • Finalize PID control implementaion based on feedback from last week's test drives
  • Finalize obstacle avoidance algorithm based on feedback from last week's test drives
  • Finalize checkpoint algorithm based on feedback from last week's test drives
  • Test PID control implementation (outoor)
  • Test obstacle avoidance algorithm on car (outdoor)
  • Test checkpoint algorithm on car (outdoor)
14 05/17/2020 05/23/2020
  • Demo
  • Push final code to GitLab
  • Submit individual contributions feedback for all team members
  • Make final updates to Wiki report


Parts List & Cost

Item# Part Desciption Vendor Qty Cost
1 RC Car Chassis Traxxas 1 $250.00
2 Lithium-Ion Battery 1
3 Battery Charger 1
4 Tap Plastics Acrylic Sheet 1
5 Ultrasonic Sensors Amazon [2] 4
6 GPS Module 1
7 GPS Antenna 1
8 Compass Module 1
9 UART LCD Display 1
10 Bluetooth Module 1
11 CAN Transceivers SN65HVD230DR 15 Free Samples
12 Sjtwo Board Preet 4 $50.00
13 12" Pipe 1
14 Android Mobile Phone 1
15 Sensor Mounts 4


Printed Circuit Board

<Picture and information, including links to your PCB>


CAN Communication

<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

Hardware Design

<Show your CAN bus hardware design>

DBC File

DBC File



Sensor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Motor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Geographical Controller

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Communication Bridge Controller & LCD

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Master Module

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>


Mobile Application

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>




Conclusion

<Organized summary of the project>

<What did you learn?>

Project Video

Project Source Code

Advise for Future Students

<Bullet points and discussion>

Acknowledgement

=== References ===

Retrieved from "http://socialledge.com/sjsu/index.php?title=S20:_Bucephalus&oldid=59236"