Difference between revisions of "F18: Wireless sensor network"
Proj user22 (talk | contribs) (→Schedule) |
Proj user22 (talk | contribs) (→Project Title) |
||
| Line 11: | Line 11: | ||
</font> | </font> | ||
| − | == | + | == Wireless Sensor Network == |
== Abstract == | == Abstract == | ||
Revision as of 00:32, 19 November 2018
Contents
Grading Criteria
- How well is Software & Hardware Design described?
- How well can this report be used to reproduce this project?
- Code Quality
- Overall Report Quality:
- Software Block Diagrams
- Hardware Block Diagrams
- Schematic Quality
- Quality of technical challenges and solutions adopted.
Wireless Sensor Network
Abstract
This section should be a couple lines to describe what your project does.
Objectives & Introduction
Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.
Team Members & Responsibilities
- Halak Vyas
- RTC Config (primary), Wireless driver (secondary), Sensor drivers
- Jay Parsana
- Display driver (primary), Sensor drivers
- Prashant Gandhi
- PCB Assembly, PCB Design (review), Sensor drivers
- Tristan French
- Team lead, PCB Design (primary), PCB Assembly (secondary), Display driver (secondary)
- Vatsal Makani
- Wireless driver (Primary), PCB design (secondary), Wiki lead
Schedule
| Week# | Date | Task | Actual | |
|---|---|---|---|---|
| 1 | 10/9 | Tristan
Everyone
|
Tristan
Everyone
| |
| 2 | 10/16 | Everyone
|
Everyone
Unforeseen issues
| |
| 3 | 10/23 | Vatsal
|
Vatsal
| |
| 4 | 10/30 | Tristan
Halak
Jay
|
Tristan
Halak
Jay
| |
| 5 | 11/6 | PCB design complete and ordered (including components) | Poor documentation on MQ-135, waiting for parts before releasing PCB | |
| 6 | 11/13 | Basic wireless driver, Basic LED display driver, RTC programming done | PCB ordered (11/10) arriving 11/15. LED matrix initial test completed. Wireless not functioning yet, Prashant and Halak to support Vatsal. | |
| 7 | 11/20 | PCB soldered and tested | Completed? Problems Encountered? | |
| 8 | 11/27 | Integration of all drivers/modules, All sensor readings working | Completed? Problems Encountered? | |
| 9 | 12/4 | Debugging any major issues | Completed? Problems Encountered? | |
| 10 | 12/11 | Final code cleanup and testing complete, Project complete | Completed? Problems Encountered? | |
| 11 | 12/12 | Project Demo and Review day | Completed? Problems Encountered? |
Parts List & Cost
Parts List & Cost
| Item# | Part | Manufacturer | Quantity | Cost($) |
|---|---|---|---|---|
| 1 | SJ One Board | Preet | 5 | 80.00 |
| 2 | Adafruit RGB LED Matrix | LED Matrix | 1 | 24.95 |
| 3 | Power Adapter | N/A (Stock) | 1 | N/A |
| 4 | Air Quality Sensor | Willwin | 4 | 4.50 |
| 5 | Custom Sensor PCB | JLCPCB | 4 | 2.00 |
| 6 | .... | .... | x | x.00 |
- Total Cost:
Design & Implementation
The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.
Hardware Design
Discuss your hardware design here. Show detailed schematics, and the interface here.
Hardware Interface
In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.
Software Design
Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.
Implementation
This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.
Testing & Technical Challenges
Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.
Include sub-sections that list out a problem and solution, such as:
<Bug/issue name>
Discuss the issue and resolution.
Conclusion
Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?
Project Video
Upload a video of your project and post the link here.
Project Source Code
References
Acknowledgement
Any acknowledgement that you may wish to provide can be included here.
References Used
List any references used in project.
Appendix
You can list the references you used.
