Difference between revisions of "F18: Catch me if you can"

Revision as of 23:53, 26 October 2018

Grading Criteria

Project Title

Catch Me If You Can

Abstract

Our Project is a game named "Catch me if you can", where the user must catch the dropped eggs (objects) into the basket. The system will consist of two SJ boards, the one board will be used as a game console with which user will try to catch the eggs and the other board will be game display module, which displays the graphic of eggs falling and also the basket into which the eggs should be caught. The two boards will be communicating via Bluetooth.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

• Rishabh Sheth
  • managing WiKi, PCB design, and console application code
• Kailash Kumar Chakravarty
  • LED 32x32 matrix driver, Game display application code
• Nandini Mandya Shankaraiah
  • Audio output driver, Game display application code
• Aquib Abduljabbar Mulani
  • Wireless chip driver/application
• Swanand Sapre
  • PCB design, and console application code

Schedule

Parts List & Cost

• Parts List:
  • SJ One board: 2 (1 for game console and 1 for led matrix control and sound control)
  • Onboard wireless RF Nordic transceiver: (on SJ one board): 2
  • LED matrix: 1
  • Speaker: 1
  • Accelerometer (on SJ one board):1
  • Switches
  • Portable power supply

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

<Bug/issue name>

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

• Sourceforge Source Code Link

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.