Difference between revisions of "S17: Interactive Snake and ladder"

Revision as of 22:23, 15 May 2017

Project Title

Snake and Ladder

Abstract

This project aims to bring the fun and simplicity of snake and ladder game with some new features. It is a snake and ladder game using SJONE board, LCD and 2 wireless remotes. LCD display is connected to the SJONE board will display the game grid. It will also have the multiplayer feature that will allow more than one players to play the game using wireless remotes simultaneously. This project explores a new dimension in the traditional snake game to make it more interesting and challenging.

Objectives & Introduction

This game aims to change the way people think of traditional snake game. It will offer the experience of commercial multilayer games to the player retaining the simplicity of traditional snake game.

• The major objectives of this project are:
  • To create a snake and ladder game that will have all the functionality of traditional snake and ladder games.
  • Introduce multiplayer functionality in the game that will allow several players to play a game simultaneously. It should be able to give the experience of a real time multiplayer game to the players.
  • To introduce Speech output for events.

Roles & Responsibilities

• Hardware and PCB designing
  • Bhupendra Naphade
• Speech Module Interface and Algorithm
  • Aniket Bapat
• LCD Interface and Game board Algorithm
  • Saurabh Deshmukh
  • Abhishek Singh
• Wireless Communication
  • Jerry John

Schedule

Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

Design & Implementation

Overall System

• The overall system is divided into 3 parts:
  • game image display(LCD): the snake and ladder image grid is mounted on the 7 inches LCD screen.
  • wireless SJONE board: the antenna is connected to SJONE board to transmit and receive signal from master. The basic use of the SJONE board with antenna is to through dice.
  • text to speech module: based on the actions performed the audio file gets executed. To make a game more effective and attractive.

All these functionalities work in parallel and have the same priorities.

Overall System Flow Chart

Hardware Design

Printed Circuit Board

Schematic Diagram

Below is the schematic diagram for the project. It includes the power supply, interface for LCD controller and text to speech module.

PCB Layout

Below is the PCB layout developed using Eagle PCB and Altium designer.

Text to Speech Module

In Emic 2 Text-to-Speech(TTS) module we use UART protocol for communication with microcontroller. In this project, UART3 of the Sjone board is used for interface. This module has own commands for the text to speech conversion, voice selection, volume change.

• The pin configuration for Emic 2 TTS module is:
  • SOUT – UART (RxD3)
  • SIN – UART (TxD3)
  • 5V – 3.3V (on board)
  • GND - GND

• Its key features of Emic2 text-to-speech are as follows:
  • High-quality speech synthesis for English and Spanish languages.
  • Nine pre-defined voice styles comprising male, female, and child.
  • Dynamic control of speech and voice characteristics, including pitch, speaking rate, and word emphasis.
  • Industry-standard DEC talk text-to-speech synthesizer engine (5.0.E1).
  • on board 3.5mm audio jack

Hardware Interface

Text to speech

Text to speech pinout

Text to speech pin connection

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

PCB

• Below is a list of challenges we faced during PCB designing:
  • For designing the PCB, we use EAGLE software. Which is new for us and that was a challenging task to draw layout.
  • We faced Assembly issues like dry solder on pins. So, we re-soldered the component pins.
  • There was an insufficient bypassing on PCB hence we added required value of bypass capacitor on board.
  • While testing PCB, we find a problem of shorting of a track so we use a multi meter to perform a continuity test and verification on the pins and fixed that.

LCD display

• The main challenged faced related to display is to print a snake and ladder picture grid. Also, to determine exact coordinates of snake and ladder on grid is one of the challenges. this a tough job but we manage to do that. Tried to achieved high refresh rate on LCD to get real time display effect.

Conclusion

We successfully completed our project of interactive snake and ladder by writing various modules and our mentioned overall objectives of it. We learned a lot about Sjone board and LPC1768 micro controller. we have added extra function in project so that multiple players (more than 2) can play the game simultaneously by just connecting antenna and flashing the code on SJone board. Hence this project increased our knowledge of software and hardware.

Project Video

Upload a video of your project and post the link here.

Project Source Code

• Sourceforge Source Code Link

References

Acknowledgement

We would like to Thank Preetpal Kang. We used his API's of free RTOS which help us a lot to write a code for each module. The knowledge he has given us about all the interfacing buses like SPI, UART, I2C helped us in using that in our project and will help in near future.

References Used

List any references used in project.

Appendix

You can list the references you used.