Difference between revisions of "F16: Real Time Traffic Control System (RTTCS)"

From Embedded Systems Learning Academy
Jump to: navigation, search
 
(One intermediate revision by the same user not shown)
Line 79: Line 79:
 
! scope="col"| Task
 
! scope="col"| Task
 
! scope="col"| Actual
 
! scope="col"| Actual
 +
! scope="col"| Comments
 
|-
 
|-
 
! scope="row"| 1
 
! scope="row"| 1
 
| 11/2
 
| 11/2
−
| Task Perform research on FreeRTOS resources. Layout the required applications. Apply the FreeRTOS concepts to these applications. Begin hardware/circuit design. Specify parts required.
+
| Perform research on FreeRTOS resources. Layout the required applications. Apply the FreeRTOS concepts to these applications. Begin hardware/circuit design. Specify parts required.
−
| Completed?  Problems Encountered?
+
| Overdue
−
|
+
| ...
 +
|-
 
! scope="row"| 2
 
! scope="row"| 2
 
| 11/11
 
| 11/11
−
| Task Design the System State Machine including, states, conditions, transitions, and control signals. Order parts and materials. Layout software logic diagram, and pseudocode.
+
| Design the System State Machine including, states, conditions, transitions, and control signals. Order parts and materials. Layout software logic diagram, and pseudocode.
−
| Completed?  Problems Encountered?
+
| Overdue
−
|
+
| ...
 +
|-
 
! scope="row"| 3
 
! scope="row"| 3
 
| 11/18
 
| 11/18
−
| Task Begin software development.
+
| Begin software development.
−
| Completed?  Problems Encountered?
+
| Pending
−
|
+
|-
 
! scope="row"| 4
 
! scope="row"| 4
 
| 11/25
 
| 11/25
−
| Task Begin manufacturing. Continue with software development.
+
| Begin manufacturing. Continue with software development.
−
| Completed?  Problems Encountered?
+
| Pending
−
|
+
|-
 
! scope="row"| 5
 
! scope="row"| 5
 
| 12/02
 
| 12/02
−
| Task Complete manufacturing. Begin software testing. Begin Presentation development.
+
| Complete manufacturing. Begin software testing. Begin Presentation development.
−
| Completed?  Problems Encountered?
+
| Pending
−
|
+
|-
 
! scope="row"| 6
 
! scope="row"| 6
 
| 12/09
 
| 12/09
−
| Task Complete software testing and development. Complete presentation production
+
| Complete software testing and development. Complete presentation production
−
| Completed?  Problems Encountered?
+
| Pending
−
|
+
|-
 
! scope="row"| 7
 
! scope="row"| 7
 
| 12/16
 
| 12/16
−
| Task Rehearse final demonstration. Revise and edit any presentation material needed.
+
| Rehearse final demonstration. Revise and edit any presentation material needed.
−
| Completed?  Problems Encountered?
+
| Pending
−
|
+
|-
 
! scope="row"| Last Day
 
! scope="row"| Last Day
 
| 12/20
 
| 12/20
−
| Task Demonstrate full system functionality. Present project.
+
| Demonstrate full system functionality. Present project.
−
| Completed?  Problems Encountered?
+
| Pending
 +
|-
 
|}
 
|}
  
 
== Parts List & Cost ==
 
== Parts List & Cost ==
−
Give a simple list of the cost of your project broken down by components.  Do not write long stories
 
  
 +
{| class="wikitable"
 +
|-
 +
! scope="col"| Item#
 +
! scope="col"| Nomenclature
 +
! scope="col"| Qty
 +
! scope="col"| Cost($)
 +
! scope="col"| Details (mfr, pn, etc.)
 +
|-
 +
! scope="row"| 1
 +
| IR Sensor
 +
| 4
 +
| unk
 +
| unk
 +
|-
 +
! scope="row"| 2
 +
| SJOne Development Board
 +
| 2
 +
| unk
 +
| unk
 +
|-
 +
! scope="row"| 3
 +
| Set of LED's (Red, Yellow, Green)
 +
| 4
 +
| unk
 +
| unk
 +
|-
 +
! scope="row"| 4
 +
| Vehicle Controllers
 +
| 2
 +
| unk
 +
| unk
 +
|-
 +
! scope="row"| 5
 +
| Power-Slide Set with 90 deg cross section
 +
| 1
 +
| 160
 +
| Scalextric Item Code: C1343T
 +
|-
 +
|}
  
−
here.
+
'''General Hardware'''
−
 
 
−
 
 
−
Sensors
 
−
4 x IR sensor
 
−
 
 
−
 
 
−
General Hardware
 
 
x Bolts
 
x Bolts
 
x Screws
 
x Screws
 
x Nuts
 
x Nuts
  
−
 
+
'''Materials'''
−
Materials
 
 
(x) ft - hook-up wire
 
(x) ft - hook-up wire
 
(x) ft - Road tracks
 
(x) ft - Road tracks
  
  
−
Processes
+
'''Electrical Components (Resistors, Capacitors, MOSFETs, etc.)'''
−
Components (Resistors, Capacitors, LEDs, Microcontrollers, etc.)
 
−
2 x SJOne Development Board
 
−
4 x Set of LED's (Red, Yellow, Green)
 
−
 
 
−
 
 
−
Of Shelf parts / Tools
 
−
2 x Vehicle Controllers
 
  
  

Latest revision as of 22:36, 16 November 2016

Grading Criteria

  • How well is Software & Hardware Design described?
  • How well can this report be used to reproduce this project?
  • Code Quality
  • Overall Report Quality:
    • Software Block Diagrams
    • Hardware Block Diagrams
      Schematic Quality
    • Quality of technical challenges and solutions adopted.


Project Title

Real Time Traffic Control System (RTTCS)


Abstract

This section should be a couple lines to describe what your project does.


RTTCS converts our cyclic time-based traffic light system into an efficient queue based system where


intersections are managed by the physical presence of vehicles rather than timed cycles. It reduces the


amount of useless-repetitive braking and/or idling by detecting real time traffic flow and making a


decision based on the environmental inputs of the detection system.


Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can


write about the various sensors or peripherals you used to get your project completed.


Objectives:


-Learn and incorporate the various RTOS resources for overall system design -Map out the software state machine diagram -Design RTTCS physical layer -Compile a Bill of Materials (BOM) -Manufacture the prototype and test for reliability -Record and document results for analysis and reports -Develop product proposal presentation (Powerpoint, Video, Website/Report)


Team Members & Responsibilities

  • Brian Josefowicz
  • Jonathan Arroyo


Schedule

Show a simple table or figures that show your scheduled as planned before you started working on the


project. Then in another table column, write down the actual schedule so that readers can see the


planned vs. actual goals. The point of the schedule is for readers to assess how to pace themselves if


they are doing a similar project.


Week# Date Task Actual Comments
1 11/2 Perform research on FreeRTOS resources. Layout the required applications. Apply the FreeRTOS concepts to these applications. Begin hardware/circuit design. Specify parts required. Overdue ...
2 11/11 Design the System State Machine including, states, conditions, transitions, and control signals. Order parts and materials. Layout software logic diagram, and pseudocode. Overdue ...
3 11/18 Begin software development. Pending
4 11/25 Begin manufacturing. Continue with software development. Pending
5 12/02 Complete manufacturing. Begin software testing. Begin Presentation development. Pending
6 12/09 Complete software testing and development. Complete presentation production Pending
7 12/16 Rehearse final demonstration. Revise and edit any presentation material needed. Pending
Last Day 12/20 Demonstrate full system functionality. Present project. Pending

Parts List & Cost

Item# Nomenclature Qty Cost($) Details (mfr, pn, etc.)
1 IR Sensor 4 unk unk
2 SJOne Development Board 2 unk unk
3 Set of LED's (Red, Yellow, Green) 4 unk unk
4 Vehicle Controllers 2 unk unk
5 Power-Slide Set with 90 deg cross section 1 160 Scalextric Item Code: C1343T

General Hardware x Bolts x Screws x Nuts

Materials (x) ft - hook-up wire (x) ft - Road tracks


Electrical Components (Resistors, Capacitors, MOSFETs, etc.)


Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-


sections that go over your design and implementation.


Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.


Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can


discuss your driver implementation here, such that the Software Design section is isolated to talk


about high level workings rather than inner working of your project.


Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are


using, and what they are doing at a high level. Do not show the details of the code. For example, do


not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are


showing DESIGN of your software, not the inner workings of it.


Implementation

This section includes implementation, but again, not the details, just the high level. For example, you


can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory


onto SPI Flash. You can include sub-sections for each of your component implementation.


Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your


project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.


Include sub-sections that list out a problem and solution, such as:


My Issue #1

Discuss the issue and resolution.


Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what"


part here to indicate what you ultimately learnt from this project. How has this project increased your


knowledge?


Project Video

Upload a video of your project and post the link here.


Project Source Code


References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.


References Used

List any references used in project.


Appendix

You can list the references you used.

Retrieved from "http://socialledge.com/sjsu/index.php?title=F16:_Real_Time_Traffic_Control_System_(RTTCS)&oldid=29482"