Difference between revisions of "F16: Micro Watch Monitoring System"

Revision as of 02:27, 21 December 2016

Micro Watch Monitoring System

Abstract

The Micro Watch Monitoring System uses Amazon's Alexa Voice Service to relay monitored data from a network of SJ-One Boards with the assistance of the Raspberry Pi 3. The monitored data from a SJ-One Board is transmitted and received via a Xbee Wire Antenna module. The monitored data is then uploaded to our backend system, Google Firebase, by the Raspberry Pi 3, and is accessible through any device integrated with the Alexa Voice Service.

Objectives & Introduction

The objective of this project is to be able to monitor a network of SJ-One Boards for statistical data that is accessible via voice commands acknowledged by the Alexa Voice Service.

Tasks

• Create FreeRTOS tasks to monitor sensor data, pin dat, and OS statistics on the SJ-One Board
• Create a task that parses sensor data into Javascript Object Notation (json) and utilizes the Xbee Wire Antenna to wirelessly transmit it via the UART protocol
• Create a python script for the Raspberry Pi 3 that parses data received by the Xbee Wire Antenna and relays it to Firebase
• Create an Alexa Skill that can answer user queries by accessing data in the Firebase Real-time Database.

Team Members & Responsibilities

Sanjay Agarwal

• SJ-One Board Software Design
• Hardware Connectivity Design
• Software and Hardware System Testing

Mason Itkin

• Raspberry Pi 3 Software Design
• Amazon Alexa Voice Service Skill Design
• Software and Voice Service System Testing

Schedule

Parts List & Cost

Design & Implementation

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Xbee Wire Antenna Module

The Digi XCTU software is used to configure the Xbee Wire Antenna modules. The module that is placed on the SJ-One Board is setup as a transmitter while the module connected to the Raspberry Pi 3 via the Xbee Explorer Dongle is setup as a receiver. The SJ-One Board sends data to the Raspberry Pi 3 via UART3 protocol, and the Raspberry Pi 3 parses this data upon receiving it.

Figure 1. Xbee Wire Antenna

Xbee Explorer Dongle

The Xbee Explorer Dongle is used to connect the Xbee Wire Antennas to the Digi XCTU software as well as connect the Xbee Wire Antenna to the Raspberry Pi 3.

Figure 2. Xbee Explorer Dongle USB Controller

Figure 2. Xbee Explorer Dongle Pin Configuration

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show pseudocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

SJ-One Board Monitoring Task

For this task, three tasks were implemented to gather data from the operating system, sensors, and pins of the SJ-One Board. The operating system task calculates the CPU usage of each running task in the system along with the amount of global memory used, allocated memory used, allocated memory available, and memory available on the system. The sensor task reads data from the temperature sensor, light sensor, and accelerometer on the board. The pin task checks if any of the on-board switches are being used or not. These three tasks run at low priority and sends all the data collected to a fourth task which is the consumer. The consumer receives the data, stores it in three separate queues, initializes the UART3 protocol on the board to prepare transmitting data to the Raspberry Pi 3 via the Xbee Wire Antenna module, and runs at a high priority. A fifth task called fresh clears each queue every 50 milliseconds to allow data to be sent to the consumer in real time. The fresh task runs at a medium priority and should always run at a lower priority level than the consumer.

Raspberry Pi JSON Parsing and Firebase Upload

The python script utilizes several modules to read serial data from the Explorer dongle, parse the json string into an object, add a timestamp, and upload to firebase. The Python serial module is used to read from the Explorer dongle with a baud rate of 9600 and an infinite timeout. A loop to read the serial data is implemented using a try statement as occasionally bad or incomplete data can be sent over the Xbee resulting in serial read errors or failed json parsing. A secondary loop is used to ensure that the Python script halts until a complete line is received. This ensures that the json object can be parsed from the string and prevents data from piling up on the serial queue, delaying the latest information from being pushed to firebase. Once the json string is parsed into a Python object, another python module for time is used to add additional fields to the data for date and time. Once the data object is read to be sent it is serialized back into a string and attached to the body of an HTTP PUT request sent to Firebase's real-time database. Finally, the result of the HTTP PUT request is checked for the expected error code (200) and the uploaded json is printed to the console.

while 1:
    # Wait indefinitely for new serial data
    while uartString is not json
      uartString = readline(None)

    # add timestamp
    uartJson['timestamp'] = time_hhmmss
  
    # update json in fireBase
    result = requests.put(firebase_url, uartJson)
    if result.status_code is 200:
      print 'Data update Successful'
    else:
      print 'fireBase Data update failed'

Amazon Alexa Skill

The Amazon Alexa skill development can be split up into two parts, the Alexa skill code hosted on Amazon Web Services (AWS) Lambda, and the Amazon Voice Services (AVS) Interaction model defined by text and json files. The Alexa skill was developed using the Alexa Skill Kit SDK for NodeJS and uses a series of intent handlers to process the incoming json files that hold user requests. For this application, several intents for user query, app launch, and help, and exit are supported, each with their own function code. Upon receiving a user request for a query intent the Alexa Skill code will look for the intended request, pull the desired data from Firebase, format it into a response, then send that response to AVS. The AVS interaction model is defined by the types of applicable intents found in the intent schema, the custom intent items found in the items list, and the sample utterances of the defined intents found in the utterances text. For example if the user said "What is the board's temperature", the utterance would be "QueryIntent What is the board's {item}", the list of items would have "temperature" in it, and the intent schema would link the items list to the QueryIntent.

Intent Schema

{
  "intents": [
    {
      "intent": "QueryIntent",
      "slots": [
      {
        "name" : "Item",
        "type": "LIST_OF_ITEMS"
      }
     ]
    },
    {
      "intent": "AMAZON.RepeatIntent"
    },
    {
      "intent": "AMAZON.HelpIntent"
    },
    {
      "intent": "AMAZON.StopIntent"
    },
    {
      "intent": "AMAZON.CancelIntent"
    }
  ]
}

List of Items

temp
temperature
light
memory
button
accelerometer
accel
task
tasks
top tasks
top three tasks
cpu
cpu usage
task usage
last update
last update time

Utterances

QueryIntent what is the current {Item}
QueryIntent what is the boards {Item}
QueryIntent what is the board {Item}
QueryIntent what is the {Item}
QueryIntent tell me the current {Item}

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

SJ-One Board Monitoring Task Issues

While implementing the monitoring driver for the SJ-One Board, the queues that transmitted data to the consumer task were not functioning properly. Every compile run would net an issue with the queue.h header file that caused some confusion. To fix this issue, each section of the code was checked to see what section was creating the compile issues. It was discovered that our queues were sending the wrong data types to the consumer. Once the data types were modified to the proper characteristic of each queue, the issue was resolved.

While implementing the Xbee task within the consumer task, establishing the connection between the Xbee Wire Antenna on the SJ-One Board with the Xbee Wire Antenna on the Raspberry Pi 3 was troublesome. The first test was to see if data could be sent to the SJ-One Board from the Xbee Wire Antenna connected to the Digi XCTU software. The gets() function from the char_dev.hpp header file was implemented to see if data could be received and shown in Hercules. This function could not parse and display the test data sent as needed, so the next function implemented was the getChar function from the char_dev.hpp header file. This function allowed data transmission to instantly be seen in Hercules as it was being typed in the XCTU console which solved our receiving issue. Once this was complete, the second test ran was to send data out from the SJ-One Board. Using the putline() function, test data was sent to the XCTU console, the software successfully received it on the first try, and our sending and receiving issues were resolved.

Conclusion

Designing this project is a great way to learn about the functionality of the SJ-One Board, Raspberry Pi 3, Xbee Wire Antenna, Google Firebase, and Amazon Alexa. Throughout testing, it was deduced that more time should be spent on debugging the project since the amount of time that was allocated for it was insufficient. If we were to recreate this project, we would expand the project's functionality to include the detection of the communication buses actively being used on the SJ-One Board. The Micro Watch Monitoring System is now fully functional and ready to be deployed to the future CMPE 146 classes!

Project Video

YouTube

Project Source Code

Github Repository

References

Acknowledgement

We would like to thank Preetpal Kang for the advice he has given us on this project and the curriculum of CMPE 146. This class is beneficial to our Computer Engineering profession as we have learned about embedded system programming.

References Used

SJ-One Board Info

Raspberry Pi 3 Datasheet

Xbee Wire Antenna Datasheet

Xbee Explorer Dongle Datasheet

Google Firebase Documentation

Amazon Alexa Documentation