Difference between revisions of "F16: Spartan and Furious"

Revision as of 20:40, 1 October 2016

Project Title

Abstract

This section should be a couple lines to describe what your project does.

Objectives & Introduction

Show list of your objectives. This section includes the high level details of your project. You can write about the various sensors or peripherals you used to get your project completed.

Team Members & Responsibilities

Android and Communication Bridge:
- Manali Deshmukh
Geographical Controller:
- Harsha Gorantla
- Shaurya Jain
Master Controller:
- Ankita Singhal
- Sukriti Choudhary
Motor Controller
- Shilpa Srinivasan
Sensor and I/O Controller:
- Bhushan Muthiyan
- Karthik Parameswaran

Schedule

Week#	Date	Task	Actual	Status
1	9/17/2016	Purchasing RC car.	Purchased RC car.	Complete
2	9/24/2016	Individual module distribution Project report setup Git setup	Members identified for modules Wikipage project report template and Git were setup	Complete
3	4/04/2016	Hardware Design of Robot assembly and motor driver. Follow up on component procurement.	All components received. Initiated Hardware design of robot assembly.	Completed
4	4/11/2016	Assembling the parts of Robot and motor driver. Capturing the data from LSM303.	All parts of Robot and Motor Driver assembled. Accelerometer and Magnetometer data successfully captured.	Completed
5	4/18/2016	Establishing basic wirelesss communication between two SJOne Boards. Interfacing the motor with SJOne board and controlling the speed and direction.	Successful transmission of data from one board to another using Xbee. Successfully able to control the motor's direction using SJOne Board.	Completed
6	4/25/2016	Testing of wireless transmission for actual data between two nodes. Calibration of linear accelerometer and magnetometer sensors. Interfacing of the obstacle avoidance module.	Able to transmit direction and motion from the user node to the slave node via Xbee. Calibrated LSM303 sensor. Slave is able to detect obstacles using Ultrasonic sensor.	Completed
7	5/05/2016	Integration of all the modules. Testing and Debugging.	Successfully integrated all the modules. Minor issues in copying the motion.	Completed
8	5/12/2016	Final testing of the Motion copy Bot.	Successful testing of the Bot.	Completed

Parts List & Cost

Give a simple list of the cost of your project broken down by components. Do not write long stories here.

ECUs

Geographical

Hardware Design

Discuss your hardware design here. Show detailed schematics, and the interface here.

Hardware Interface

In this section, you can describe how your hardware communicates, such as which BUSes used. You can discuss your driver implementation here, such that the Software Design section is isolated to talk about high level workings rather than inner working of your project.

Software Design

Show your software design. For example, if you are designing an MP3 Player, show the tasks that you are using, and what they are doing at a high level. Do not show the details of the code. For example, do not show exact code, but you may show psuedocode and fragments of code. Keep in mind that you are showing DESIGN of your software, not the inner workings of it.

Implementation

This section includes implementation, but again, not the details, just the high level. For example, you can list the steps it takes to communicate over a sensor, or the steps needed to write a page of memory onto SPI Flash. You can include sub-sections for each of your component implementation.

I/O

Master

Design & Implementation

The design section can go over your hardware and software design. Organize this section using sub-sections that go over your design and implementation.

Testing & Technical Challenges

Describe the challenges of your project. What advise would you give yourself or someone else if your project can be started from scratch again? Make a smooth transition to testing section and described what it took to test your project.

Include sub-sections that list out a problem and solution, such as:

My Issue #1

Discuss the issue and resolution.

Conclusion

Conclude your project here. You can recap your testing and problems. You should address the "so what" part here to indicate what you ultimately learnt from this project. How has this project increased your knowledge?

Project Video

Upload a video of your project and post the link here.

Project Source Code

Gitlab Code Link

References

Acknowledgement

Any acknowledgement that you may wish to provide can be included here.

References Used

List any references used in project.

Appendix

You can list the references you used.

@@ Line 32: / Line 32: @@
 |-
 ! scope="row"| 1
-| 3/18/2016
+| 9/17/2016
 |
-* Team discussion on understanding the requirements and deciding on how to proceed with the project.
+* Purchasing RC car.
-* Assigning responsibilities to each team member.
 |
-* Discussed about requirements.
+* Purchased RC car.
-* Assigned module wise responsibilities.
+| Complete
-| Completed
 |-
 ! scope="row"| 2
-| 3/29/2016
+| 9/24/2016
 |
-* Finalizing the bill of material.
+* Individual module distribution
-* Ordering the components.
+* Project report setup
+* Git setup
 |
-*Finalized the components.
+* Members identified for modules
-* Ordered the components.
+* Wikipage project report template and Git were setup
-| Completed
+| Complete
 |-
 ! scope="row"| 3