S24: Team Zero

From Embedded Systems Learning Academy
Revision as of 23:52, 15 May 2024 by 243 user4 (talk | contribs) (Parts List & Cost)

Jump to: navigation, search

Project Title

TEAM ZERO



Abstract

Team Zero's Self driving RC car, as the name states, is an autonomous vehicle designed to navigate to a given specified destination successfully, avoiding obstacles along its way. The car's infrastructure is built upon four key components: the Driver, Sensor and Bridge, Geo, and Motor nodes, which communicate internally via a CAN Bus and with the user via a mobile app. The vehicle continuously senses and processes all the information from these nodes to make decisions to ensure it stays on course and reaches its destination. It is built on a hobby-grade RC car chassis, modified with the necessary components and adjustments to fulfill its primary objectives of autonomous navigation and obstacle avoidance.

Introduction

The project was divided into N modules:

  • Geographical Controller and LCD
  • Motor Controller
  • Sensor-Bridge Controller
  • Driver Controller
  • Mobile Application

Team Members & Responsibilities

Team zero image.jpeg

Gitlab Project Link - [1]

Cody Ourique [2]

  • Geo controller
  • Compass,GPS and LCD interfacing
  • Hardware design, development and mounting
  • LCD modules
  • Unit Testing

Anusha Arunnandi [3]

  • Bridge-Sensor controller
  • Ultrasonic range finder and bluetooth interfacing
  • Web application
  • Unit Testing

Chaitanya Battula [4]

  • Driver controller
  • Motor controller
  • RPM sensor, ESC, and servo motor interfacing
  • Unit Testing

Rohit Duvvuru [5]

  • Unit Testing


Schedule

Week# Start Date End Date Task Status
1 03/03/2024 03/09/2024
  • Read previous projects, gather information and discuss among the group members.
  • Distribute modules to each team member.
  • Decide on list of parts to be used.
Completed
2 03/10/2024 03/16/2024
  • Order sensor parts, RC car, and other items from list.
  • Complete implementation of controller interfaces using custom values and communicating over CAN Bus with DBC.
3 03/17/2024 03/23/2024
  • Receive all parts from list
  • Start hardware prototype design
  • Integrate sensor values into Sensor controller interface.
  • Connect Motor, Driver, and Sensor modules over CAN Bus and verify their messages.
4 03/24/2024 03/30/2024
  • Connect geographical modules over CAN Bus and verify messages
  • Connect sensors to RC car
  • Prototype hardware components on bread board
5 03/31/2024 04/06/2024
  • Connect sensors to RC car/perf board
6 04/07/2024 04/13/2024
7 04/14/2024 04/20/2024
8 04/21/2024 04/27/2024


Parts List & Cost

Item# Part Desciption Vendor Qty Cost
1 RC car Traxxas [6] 1 $239.95
2 RPM sensor Traxxas [7] 1 $12.00
3 GPS Breakout Board Adafruit [8] 1 $54.95
4 PCB prototype circuit board A1 Cables N PCBs [9] 1 $8.57
5 Plexiglass Lesnlok [10] 1 $9.98
6 Wireless bluetooth RF transceiver HiLetgo [11] 1 $9.95
7 Compass Adafruit [12] 1 $5.95
8 Ultrasonic range finder Adafruit [13] 4 $114.00
8 Potentiometer Amazon [14] 1 $9.99
8 2 Pack 15000mAh power bank Amazon [15] 1 $19.99
8 GPS Antenna Mount Honbay [16] 2 $7.29
8 I2C Qwiic Cable Kit Amazon [17] 1 $9.99
8 Black Foam Padding Amazon [18] 1 $11.99
8 Traxxas 6537 Wire Retainers Amazon [19] 1 $6.95
8 USB Micro-B Breakout Board Adafruit [20] 1 $4.88
8 24 awg Wire Solid Core Amazon [21] 1 $14.99
8 ELEGOO 6PCS 170 tie-Points Mini Breadboard Amazon [22] 1 $6.98
8 GPS Antenna Amazon [23] 1 $10.99
8 Standoffs Amazon [24] 1 $22.96
8 Breadboard Wires Amazon [25] 1 $5.97
8 3/16 inch fiberglass rod TAP plastics 1 $5.11


Printed Circuit Board

<Picture and information, including links to your PCB>



CAN Communication

<Talk about your message IDs or communication strategy, such as periodic transmission, MIA management etc.>

Hardware Design

<Show your CAN bus hardware design>

DBC File

<Gitlab link to your DBC file> <You can optionally use an inline image>




Sensor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Motor ECU

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Geographical Controller

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>





Communication Bridge Controller & LCD

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Master Module

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>



Mobile Application

<Picture and link to Gitlab>

Hardware Design

Software Design

<List the code modules that are being called periodically.>

Technical Challenges

< List of problems and their detailed resolutions>






Conclusion

<Organized summary of the project>

<What did you learn?>

Project Video

Project Source Code

Advise for Future Students

<Bullet points and discussion>

Acknowledgement

References